u-boot/drivers/net/xilinx_ll_temac_fifo.c

143 lines
3.7 KiB
C
Raw Normal View History

/*
* Xilinx xps_ll_temac ethernet driver for u-boot
*
* FIFO sub-controller
*
* Copyright (C) 2011 - 2012 Stephan Linz <linz@li-pro.net>
* Copyright (C) 2008 - 2011 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008 - 2011 PetaLogix
*
* Based on Yoshio Kashiwagi kashiwagi@co-nss.co.jp driver
* Copyright (C) 2008 Nissin Systems Co.,Ltd.
* March 2008 created
*
* CREDITS: tsec driver
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* [0]: http://www.xilinx.com/support/documentation
*
* [F]: [0]/ip_documentation/xps_ll_fifo.pdf
* [S]: [0]/ip_documentation/xps_ll_temac.pdf
* [A]: [0]/application_notes/xapp1041.pdf
*/
#include <config.h>
#include <common.h>
#include <net.h>
#include <asm/types.h>
#include <asm/io.h>
#include "xilinx_ll_temac.h"
#include "xilinx_ll_temac_fifo.h"
int ll_temac_reset_fifo(struct eth_device *dev)
{
struct ll_temac *ll_temac = dev->priv;
struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
out_be32(&fifo_ctrl->tdfr, LL_FIFO_TDFR_KEY);
out_be32(&fifo_ctrl->rdfr, LL_FIFO_RDFR_KEY);
out_be32(&fifo_ctrl->isr, ~0UL);
out_be32(&fifo_ctrl->ier, 0);
return 0;
}
int ll_temac_recv_fifo(struct eth_device *dev)
{
int i, length = 0;
u32 *buf = (u32 *)NetRxPackets[0];
struct ll_temac *ll_temac = dev->priv;
struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
if (in_be32(&fifo_ctrl->isr) & LL_FIFO_ISR_RC) {
/* reset isr */
out_be32(&fifo_ctrl->isr, ~0UL);
/*
* MAYBE here:
* while (fifo_ctrl->isr);
*/
/*
* The length is written (into RLR) by the XPS LL FIFO
* when the packet is received across the RX LocalLink
* interface and the receive data FIFO had enough
* locations that all of the packet data has been saved.
* The RLR should only be read when a receive packet is
* available for processing (the receive occupancy is
* not zero). Once the RLR is read, the receive packet
* data should be read from the receive data FIFO before
* the RLR is read again.
*
* [F] page 17, Receive Length Register (RLR)
*/
if (in_be32(&fifo_ctrl->rdfo) & LL_FIFO_RDFO_MASK) {
length = in_be32(&fifo_ctrl->rlf) & LL_FIFO_RLF_MASK;
} else {
printf("%s: Got error, no receive occupancy\n",
__func__);
return -1;
}
if (length > PKTSIZE_ALIGN) {
printf("%s: Got error, receive package too big (%i)\n",
__func__, length);
ll_temac_reset_fifo(dev);
return -1;
}
for (i = 0; i < length; i += 4)
*buf++ = in_be32(&fifo_ctrl->rdfd);
NetReceive(NetRxPackets[0], length);
}
return 0;
}
int ll_temac_send_fifo(struct eth_device *dev, void *packet, int length)
{
int i;
u32 *buf = (u32 *)packet;
struct ll_temac *ll_temac = dev->priv;
struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
if (length < LL_FIFO_TLF_MIN) {
printf("%s: Got error, transmit package too small (%i)\n",
__func__, length);
return -1;
}
if (length > LL_FIFO_TLF_MAX) {
printf("%s: Got error, transmit package too big (%i)\n",
__func__, length);
return -1;
}
for (i = 0; i < length; i += 4)
out_be32(&fifo_ctrl->tdfd, *buf++);
/*
* Once the packet length is written to the TLR it is
* automatically moved to the transmit data FIFO with
* the packet data freeing up the TLR for another value.
* The packet length must be written to the TLR after
* the packet data is written to the transmit data FIFO.
* It is not valid to write data for multiple packets
* to the transmit data FIFO before writing the packet
* length values.
*
* [F] page 17, Transmit Length Register (TLR)
*/
out_be32(&fifo_ctrl->tlf, length);
return 0;
}