u-boot/board/lantec/lantec.c

209 lines
5.7 KiB
C
Raw Normal View History

2002-08-26 21:58:50 +00:00
/*
* (C) Copyright 2000, 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* (C) Copyright 2001
* Torsten Stevens, FHG IMS, stevens@ims.fhg.de
* Bruno Achauer, Exet AG, bruno@exet-ag.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Derived from ../tqm8xx/tqm8xx.c
*/
#include <common.h>
#include <mpc8xx.h>
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFFFFF
const uint sdram_table[] = {
2002-08-26 21:58:50 +00:00
/*
* Single Read. (Offset 0 in UPMA RAM)
*/
0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
0x1ff77c47, /* last */
2002-08-26 21:58:50 +00:00
/*
* SDRAM Initialization (offset 5 in UPMA RAM)
*
* This is no UPM entry point. The following definition uses
* the remaining space to establish an initialization
* sequence, which is executed by a RUN command.
*
*/
0x1ff77c35, 0xefeabc34, 0x1fb57c35, /* last */
2002-08-26 21:58:50 +00:00
/*
* Burst Read. (Offset 8 in UPMA RAM)
*/
0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */
2002-08-26 21:58:50 +00:00
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPMA RAM)
*/
0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */
2002-08-26 21:58:50 +00:00
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPMA RAM)
*/
0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */
_NOT_USED_,
2002-08-26 21:58:50 +00:00
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPMA RAM)
*/
0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
0xfffffc84, 0xfffffc07, 0xfffffc07, /* last */
_NOT_USED_,
2002-08-26 21:58:50 +00:00
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPMA RAM)
*/
0x7ffffc07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
2002-08-26 21:58:50 +00:00
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*
* Test TQ ID string (TQM8xx...)
* If present, check for "L" type (no second DRAM bank),
* otherwise "L" type is assumed as default.
*
* Return 1 for "L" type, 0 else.
*/
int checkboard (void)
{
printf ("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC);
2002-08-26 21:58:50 +00:00
return 0;
}
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
2002-08-26 21:58:50 +00:00
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size_b0;
int i;
/*
* Configure UPMA for SDRAM
*/
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
2002-08-26 21:58:50 +00:00
memctl->memc_mptpr = CFG_MPTPR_1BK_8K /* XXX CFG_MPTPR XXX */ ;
2002-08-26 21:58:50 +00:00
/* burst length=4, burst type=sequential, CAS latency=2 */
memctl->memc_mar = 0x00000088;
/*
* Map controller bank 3 to the SDRAM bank at preliminary address.
*/
2002-08-26 21:58:50 +00:00
memctl->memc_or3 = CFG_OR3_PRELIM;
memctl->memc_br3 = CFG_BR3_PRELIM;
/* initialize memory address register */
memctl->memc_mamr = CFG_MAMR_8COL; /* refresh not enabled yet */
/* mode initialization (offset 5) */
udelay (200); /* 0x80006105 */
memctl->memc_mcr =
MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05);
2002-08-26 21:58:50 +00:00
/* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
udelay (1); /* 0x80006130 */
memctl->memc_mcr =
MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
udelay (1); /* 0x80006130 */
memctl->memc_mcr =
MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
2002-08-26 21:58:50 +00:00
udelay (1); /* 0x80006106 */
memctl->memc_mcr =
MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06);
2002-08-26 21:58:50 +00:00
memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */
2002-08-26 21:58:50 +00:00
udelay (200);
2002-08-26 21:58:50 +00:00
/* Need at least 10 DRAM accesses to stabilize */
for (i = 0; i < 10; ++i) {
volatile unsigned long *addr =
(volatile unsigned long *) SDRAM_BASE3_PRELIM;
2002-08-26 21:58:50 +00:00
unsigned long val;
val = *(addr + i);
*(addr + i) = val;
}
/*
* Check Bank 0 Memory Size for re-configuration
*/
2002-08-26 21:58:50 +00:00
size_b0 = dram_size (CFG_MAMR_8COL,
(ulong *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
2002-08-26 21:58:50 +00:00
memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
2002-08-26 21:58:50 +00:00
/*
* Final mapping:
*/
memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
udelay (1000);
2002-08-26 21:58:50 +00:00
return (size_b0);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
2002-08-26 21:58:50 +00:00
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
2002-08-26 21:58:50 +00:00
memctl->memc_mamr = mamr_value;
2002-08-26 21:58:50 +00:00
return (get_ram_size (base, maxsize));
2002-08-26 21:58:50 +00:00
}