u-boot/arch/powerpc/cpu/mpc85xx/tlb.c

304 lines
6.4 KiB
C
Raw Normal View History

/*
* Copyright 2008-2009 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#ifdef CONFIG_ADDR_MAP
#include <addr_map.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
void invalidate_tlb(u8 tlb)
{
if (tlb == 0)
mtspr(MMUCSR0, 0x4);
if (tlb == 1)
mtspr(MMUCSR0, 0x2);
}
void init_tlbs(void)
{
int i;
for (i = 0; i < num_tlb_entries; i++) {
write_tlb(tlb_table[i].mas0,
tlb_table[i].mas1,
tlb_table[i].mas2,
tlb_table[i].mas3,
tlb_table[i].mas7);
}
return ;
}
void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
phys_addr_t *rpn)
{
u32 _mas1;
mtspr(MAS0, FSL_BOOKE_MAS0(1, idx, 0));
asm volatile("tlbre;isync");
_mas1 = mfspr(MAS1);
*valid = (_mas1 & MAS1_VALID);
*tsize = (_mas1 >> 8) & 0xf;
*epn = mfspr(MAS2) & MAS2_EPN;
*rpn = mfspr(MAS3) & MAS3_RPN;
#ifdef CONFIG_ENABLE_36BIT_PHYS
*rpn |= ((u64)mfspr(MAS7)) << 32;
#endif
}
ppc/85xx: add boot from NAND/eSDHC/eSPI support The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch implements these three bootup methods in a unified way - all of these use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM which lets us use the SPD to initialize the SDRAM. For all three bootup methods, the bootup process can be divided into two stages: the first stage will initialize the corresponding controller, configure the L2SRAM, then copy the second stage image to L2SRAM and jump to it. The second stage image is just like the general U-Boot image to configure all the hardware and boot up to U-Boot command line. When boot from NAND, the eLBC controller will first load the first stage image to internal 4K RAM buffer because it's also stored on the NAND flash. The first stage image, also call 4K NAND loader, will initialize the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K NAND loader's code comes from the corresponding nand_spl directory, along with the code twisted by CONFIG_NAND_SPL. When boot from eSDHC/eSPI, there's no such a first stage image because the CPU ROM code does the same work. It will initialize the L2SRAM according to the config addr/word pairs on the fixed address and initialize the eSDHC/eSPI controller, then load the second stage image to L2SRAM and jump to it. The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the second stage image for all different bootup methods. It's set in the board config file when one of the bootup methods above is selected. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-11 06:19:10 +00:00
#ifndef CONFIG_NAND_SPL
void print_tlbcam(void)
{
int i;
unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
/* walk all the entries */
printf("TLBCAM entries\n");
for (i = 0; i < num_cam; i++) {
unsigned long epn;
u32 tsize, valid;
phys_addr_t rpn;
read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn);
printf("entry %02d: V: %d EPN 0x%08x RPN 0x%08llx size:",
i, (valid == 0) ? 0 : 1, (unsigned int)epn,
(unsigned long long)rpn);
print_size(TSIZE_TO_BYTES(tsize), "\n");
}
}
static inline void use_tlb_cam(u8 idx)
{
int i = idx / 32;
int bit = idx % 32;
gd->used_tlb_cams[i] |= (1 << bit);
}
static inline void free_tlb_cam(u8 idx)
{
int i = idx / 32;
int bit = idx % 32;
gd->used_tlb_cams[i] &= ~(1 << bit);
}
void init_used_tlb_cams(void)
{
int i;
unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++)
gd->used_tlb_cams[i] = 0;
/* walk all the entries */
for (i = 0; i < num_cam; i++) {
mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
asm volatile("tlbre;isync");
if (mfspr(MAS1) & MAS1_VALID)
use_tlb_cam(i);
}
}
int find_free_tlbcam(void)
{
int i;
u32 idx;
for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++) {
idx = ffz(gd->used_tlb_cams[i]);
if (idx != 32)
break;
}
idx += i * 32;
if (idx >= CONFIG_SYS_NUM_TLBCAMS)
return -1;
return idx;
}
void set_tlb(u8 tlb, u32 epn, u64 rpn,
u8 perms, u8 wimge,
u8 ts, u8 esel, u8 tsize, u8 iprot)
{
u32 _mas0, _mas1, _mas2, _mas3, _mas7;
if (tlb == 1)
use_tlb_cam(esel);
_mas0 = FSL_BOOKE_MAS0(tlb, esel, 0);
_mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
_mas2 = FSL_BOOKE_MAS2(epn, wimge);
_mas3 = FSL_BOOKE_MAS3(rpn, 0, perms);
_mas7 = FSL_BOOKE_MAS7(rpn);
write_tlb(_mas0, _mas1, _mas2, _mas3, _mas7);
#ifdef CONFIG_ADDR_MAP
if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), esel);
#endif
}
void disable_tlb(u8 esel)
{
u32 _mas0, _mas1, _mas2, _mas3, _mas7;
free_tlb_cam(esel);
_mas0 = FSL_BOOKE_MAS0(1, esel, 0);
_mas1 = 0;
_mas2 = 0;
_mas3 = 0;
_mas7 = 0;
mtspr(MAS0, _mas0);
mtspr(MAS1, _mas1);
mtspr(MAS2, _mas2);
mtspr(MAS3, _mas3);
#ifdef CONFIG_ENABLE_36BIT_PHYS
mtspr(MAS7, _mas7);
#endif
asm volatile("isync;msync;tlbwe;isync");
#ifdef CONFIG_ADDR_MAP
if (gd->flags & GD_FLG_RELOC)
addrmap_set_entry(0, 0, 0, esel);
#endif
}
static void tlbsx (const volatile unsigned *addr)
{
__asm__ __volatile__ ("tlbsx 0,%0" : : "r" (addr), "m" (*addr));
}
/* return -1 if we didn't find anything */
int find_tlb_idx(void *addr, u8 tlbsel)
{
u32 _mas0, _mas1;
/* zero out Search PID, AS */
mtspr(MAS6, 0);
tlbsx(addr);
_mas0 = mfspr(MAS0);
_mas1 = mfspr(MAS1);
/* we found something, and its in the TLB we expect */
if ((MAS1_VALID & _mas1) &&
(MAS0_TLBSEL(tlbsel) == (_mas0 & MAS0_TLBSEL_MSK))) {
return ((_mas0 & MAS0_ESEL_MSK) >> 16);
}
return -1;
}
#ifdef CONFIG_ADDR_MAP
void init_addr_map(void)
{
int i;
unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
/* walk all the entries */
for (i = 0; i < num_cam; i++) {
unsigned long epn;
u32 tsize, valid;
phys_addr_t rpn;
read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn);
if (valid & MAS1_VALID)
addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), i);
}
return ;
}
#endif
unsigned int
setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
{
int i;
unsigned int tlb_size;
unsigned int wimge = 0;
unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
u64 size, memsize = (u64)memsize_in_meg << 20;
#ifdef CONFIG_SYS_PPC_DDR_WIMGE
wimge = CONFIG_SYS_PPC_DDR_WIMGE;
#endif
size = min(memsize, CONFIG_MAX_MEM_MAPPED);
/* Convert (4^max) kB to (2^max) bytes */
max_cam = max_cam * 2 + 10;
for (i = 0; size && i < 8; i++) {
int ram_tlb_index = find_free_tlbcam();
u32 camsize = __ilog2_u64(size) & ~1U;
u32 align = __ilog2(ram_tlb_address) & ~1U;
if (ram_tlb_index == -1)
break;
if (align == -2) align = max_cam;
if (camsize > align)
camsize = align;
if (camsize > max_cam)
camsize = max_cam;
tlb_size = (camsize - 10) / 2;
set_tlb(1, ram_tlb_address, p_addr,
MAS3_SX|MAS3_SW|MAS3_SR, wimge,
0, ram_tlb_index, tlb_size, 1);
size -= 1ULL << camsize;
memsize -= 1ULL << camsize;
ram_tlb_address += 1UL << camsize;
p_addr += 1UL << camsize;
}
if (memsize)
print_size(memsize, " left unmapped\n");
return memsize_in_meg;
}
unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
{
return
setup_ddr_tlbs_phys(CONFIG_SYS_DDR_SDRAM_BASE, memsize_in_meg);
}
ppc/85xx: add boot from NAND/eSDHC/eSPI support The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch implements these three bootup methods in a unified way - all of these use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM which lets us use the SPD to initialize the SDRAM. For all three bootup methods, the bootup process can be divided into two stages: the first stage will initialize the corresponding controller, configure the L2SRAM, then copy the second stage image to L2SRAM and jump to it. The second stage image is just like the general U-Boot image to configure all the hardware and boot up to U-Boot command line. When boot from NAND, the eLBC controller will first load the first stage image to internal 4K RAM buffer because it's also stored on the NAND flash. The first stage image, also call 4K NAND loader, will initialize the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K NAND loader's code comes from the corresponding nand_spl directory, along with the code twisted by CONFIG_NAND_SPL. When boot from eSDHC/eSPI, there's no such a first stage image because the CPU ROM code does the same work. It will initialize the L2SRAM according to the config addr/word pairs on the fixed address and initialize the eSDHC/eSPI controller, then load the second stage image to L2SRAM and jump to it. The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the second stage image for all different bootup methods. It's set in the board config file when one of the bootup methods above is selected. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-11 06:19:10 +00:00
#endif /* !CONFIG_NAND_SPL */