u-boot/board/mosaixtech/icon/icon.c

374 lines
15 KiB
C
Raw Normal View History

/*
* (C) Copyright 2009-2010
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/ppc4xx.h>
#include <i2c.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <netdev.h>
#include <video.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/ppc4xx-gpio.h>
#include <asm/4xx_pcie.h>
#include <linux/errno.h>
#include <asm/mmu.h>
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
unsigned long mfr;
/*
* Interrupt controller setup for the ICON 440SPe board.
*
*--------------------------------------------------------------------
* IRQ | Source | Pol. | Sensi.| Crit.
*--------+-----------------------------------+-------+-------+-------
* IRQ 00 | UART0 | High | Level | Non
* IRQ 01 | UART1 | High | Level | Non
* IRQ 02 | IIC0 | High | Level | Non
* IRQ 03 | IIC1 | High | Level | Non
* IRQ 04 | PCI0X0 MSG IN | High | Level | Non
* IRQ 05 | PCI0X0 CMD Write | High | Level | Non
* IRQ 06 | PCI0X0 Power Mgt | High | Level | Non
* IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non
* IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non
* IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non
* IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non
* IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit
* IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non
* IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non
* IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non
* IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non
* IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non
* IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit
* IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non
* IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non
* IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non
* IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non
* IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non
* IRQ 23 | I2O Inbound Doorbell | High | Level | Non
* IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non
* IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non
* IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non
* IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non
* IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non
* IRQ 29 | GPT Down Count Timer | Rising| Edge | Non
* IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non
* IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit.
*--------------------------------------------------------------------
* IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non
* IRQ 33 | MAL Serr | High | Level | Non
* IRQ 34 | MAL Txde | High | Level | Non
* IRQ 35 | MAL Rxde | High | Level | Non
* IRQ 36 | DMC CE or DMC UE | High | Level | Non
* IRQ 37 | EBC or UART2 | High |Lvl Edg| Non
* IRQ 38 | MAL TX EOB | High | Level | Non
* IRQ 39 | MAL RX EOB | High | Level | Non
* IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non
* IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non
* IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non
* IRQ 43 | L2 Cache | Risin | Edge | Non
* IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non
* IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non
* IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non
* IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non
* IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non
* IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non
* IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non
* IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non
* IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non
* IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non
* IRQ 54 | DMA Error | High | Level | Non
* IRQ 55 | DMA I2O Error | High | Level | Non
* IRQ 56 | Serial ROM | High | Level | Non
* IRQ 57 | PCIX0 Error | High | Edge | Non
* IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non
* IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non
* IRQ 60 | EMAC0 Interrupt | High | Level | Non
* IRQ 61 | EMAC0 Wake-up | High | Level | Non
* IRQ 62 | Reserved | High | Level | Non
* IRQ 63 | XOR | High | Level | Non
*--------------------------------------------------------------------
* IRQ 64 | PE0 AL | High | Level | Non
* IRQ 65 | PE0 VPD Access | Risin | Edge | Non
* IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non
* IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non
* IRQ 68 | PE0 TCR | High | Level | Non
* IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non
* IRQ 70 | PE0 DCR Error | High | Level | Non
* IRQ 71 | Reserved | N/A | N/A | Non
* IRQ 72 | PE1 AL | High | Level | Non
* IRQ 73 | PE1 VPD Access | Risin | Edge | Non
* IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non
* IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non
* IRQ 76 | PE1 TCR | High | Level | Non
* IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non
* IRQ 78 | PE1 DCR Error | High | Level | Non
* IRQ 79 | Reserved | N/A | N/A | Non
* IRQ 80 | PE2 AL | High | Level | Non
* IRQ 81 | PE2 VPD Access | Risin | Edge | Non
* IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non
* IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non
* IRQ 84 | PE2 TCR | High | Level | Non
* IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non
* IRQ 86 | PE2 DCR Error | High | Level | Non
* IRQ 87 | Reserved | N/A | N/A | Non
* IRQ 88 | External IRQ(5) | Progr | Progr | Non
* IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non
* IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non
* IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non
* IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non
* IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non
* IRQ 94 | Reserved | N/A | N/A | Non
* IRQ 95 | Reserved | N/A | N/A | Non
*--------------------------------------------------------------------
* IRQ 96 | PE0 INTA | High | Level | Non
* IRQ 97 | PE0 INTB | High | Level | Non
* IRQ 98 | PE0 INTC | High | Level | Non
* IRQ 99 | PE0 INTD | High | Level | Non
* IRQ 100| PE1 INTA | High | Level | Non
* IRQ 101| PE1 INTB | High | Level | Non
* IRQ 102| PE1 INTC | High | Level | Non
* IRQ 103| PE1 INTD | High | Level | Non
* IRQ 104| PE2 INTA | High | Level | Non
* IRQ 105| PE2 INTB | High | Level | Non
* IRQ 106| PE2 INTC | High | Level | Non
* IRQ 107| PE2 INTD | Risin | Edge | Non
* IRQ 108| PCI Express MSI Level 4 | Risin | Edge | Non
* IRQ 109| PCI Express MSI Level 5 | Risin | Edge | Non
* IRQ 110| PCI Express MSI Level 6 | Risin | Edge | Non
* IRQ 111| PCI Express MSI Level 7 | Risin | Edge | Non
* IRQ 116| PCI Express MSI Level 12 | Risin | Edge | Non
* IRQ 112| PCI Express MSI Level 8 | Risin | Edge | Non
* IRQ 113| PCI Express MSI Level 9 | Risin | Edge | Non
* IRQ 114| PCI Express MSI Level 10 | Risin | Edge | Non
* IRQ 115| PCI Express MSI Level 11 | Risin | Edge | Non
* IRQ 117| PCI Express MSI Level 13 | Risin | Edge | Non
* IRQ 118| PCI Express MSI Level 14 | Risin | Edge | Non
* IRQ 119| PCI Express MSI Level 15 | Risin | Edge | Non
* IRQ 120| PCI Express MSI Level 16 | Risin | Edge | Non
* IRQ 121| PCI Express MSI Level 17 | Risin | Edge | Non
* IRQ 122| PCI Express MSI Level 18 | Risin | Edge | Non
* IRQ 123| PCI Express MSI Level 19 | Risin | Edge | Non
* IRQ 124| PCI Express MSI Level 20 | Risin | Edge | Non
* IRQ 125| PCI Express MSI Level 21 | Risin | Edge | Non
* IRQ 126| PCI Express MSI Level 22 | Risin | Edge | Non
* IRQ 127| PCI Express MSI Level 23 | Risin | Edge | Non
*/
/*
* Put UICs in PowerPC 440SPe mode.
* Initialise UIC registers. Clear all interrupts. Disable all
* interrupts. Set critical interrupt values. Set interrupt polarities.
* Set interrupt trigger levels. Make bit 0 High priority. Clear all
* interrupts again.
*/
mtdcr(UIC3SR, 0xffffffff); /* Clear all interrupts */
mtdcr(UIC3ER, 0x00000000); /* disable all interrupts */
mtdcr(UIC3CR, 0x00000000); /* Set Critical / Non Critical IRQs */
mtdcr(UIC3PR, 0xffffffff); /* Set Interrupt Polarities*/
mtdcr(UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
mtdcr(UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */
mtdcr(UIC3SR, 0x00000000); /* clear all interrupts*/
mtdcr(UIC3SR, 0xffffffff); /* clear all interrupts*/
mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */
mtdcr(UIC2ER, 0x00000000); /* disable all interrupts*/
mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical IRQs */
mtdcr(UIC2PR, 0xebebebff); /* Set Interrupt Polarities*/
mtdcr(UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
mtdcr(UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */
mtdcr(UIC2SR, 0x00000000); /* clear all interrupts */
mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */
mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts*/
mtdcr(UIC1ER, 0x00000000); /* disable all interrupts*/
mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical IRQs */
mtdcr(UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
mtdcr(UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels*/
mtdcr(UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */
mtdcr(UIC1SR, 0x00000000); /* clear all interrupts*/
mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts*/
mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */
mtdcr(UIC0ER, 0x00000000); /* disable all int. excepted cascade */
mtdcr(UIC0CR, 0x00104001); /* Set Critical / Non Critical IRQs */
mtdcr(UIC0PR, 0xffffffff); /* Set Interrupt Polarities*/
mtdcr(UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */
mtdcr(UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest prio */
mtdcr(UIC0SR, 0x00000000); /* clear all interrupts*/
mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts*/
mfsdr(SDR0_MFR, mfr);
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
mtsdr(SDR0_MFR, mfr);
mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0);
out_be32((void *)GPIO0_OR, CONFIG_SYS_GPIO_OR);
out_be32((void *)GPIO0_ODR, CONFIG_SYS_GPIO_ODR);
out_be32((void *)GPIO0_TCR, CONFIG_SYS_GPIO_TCR);
return 0;
}
int board_early_init_r(void)
{
/*
* ICON has 64MBytes of NOR FLASH (Spansion 29GL512), but the
* boot EBC mapping only supports a maximum of 16MBytes
* (4.ff00.0000 - 4.ffff.ffff).
* To solve this problem, the FLASH has to get remapped to another
* EBC address which accepts bigger regions:
*
* 0xfc00.0000 -> 4.ec00.0000
*/
/* Remap the NOR FLASH to 0xec00.0000 ... 0xefff.ffff */
mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
/* Remove TLB entry of boot EBC mapping */
remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
/* Add TLB entry for 0xfc00.0000 -> 0x4.ec00.0000 */
program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
/*
* Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
* 0xfc00.0000 is possible
*/
/*
* Clear potential errors resulting from auto-calibration.
* If not done, then we could get an interrupt later on when
* exceptions are enabled.
*/
set_mcsr(get_mcsr());
return 0;
}
int checkboard(void)
{
char buf[64];
int i = getenv_f("serial#", buf, sizeof(buf));
printf("Board: ICON");
if (i > 0) {
puts(", serial# ");
puts(buf);
}
putc('\n');
return 0;
}
/*
* Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*
* Tested successfully with the following SODIMM:
* Crucial CT6464AC667.4FE - 512MB SO-DIMM (single rank)
*
* Tests with Micron MT4HTF6464HZ-667H1 showed problems in "cold" state,
* directly after power-up. Only after running for more than 10 minutes
* real stable auto-calibration windows could be found.
*/
u32 ddr_wrdtr(u32 default_val)
{
return SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV;
}
u32 ddr_clktr(u32 default_val)
{
return SDRAM_CLKTR_CLKP_180_DEG_ADV;
}
/*
* Override the weak default implementation and return the
* last PCIe slot number (max number - 1).
*/
int board_pcie_last(void)
{
/* Only 2 PCIe ports used on ICON, so the last one is 1 */
return 1;
}
/*
* Video
*/
#ifdef CONFIG_VIDEO_SM501
#include <sm501.h>
#define DISPLAY_WIDTH 640
#define DISPLAY_HEIGHT 480
static const SMI_REGS sm502_init_regs[] = {
{0x00004, 0x0},
{0x00040, 0x00021847},
{0x00044, 0x091a0a01}, /* 24 MHz pixclk */
{0x00054, 0x0},
{0x00048, 0x00021847},
{0x0004C, 0x091a0a01},
{0x00054, 0x1},
{0x80004, 0xc428bb17},
{0x8000C, 0x00000000},
{0x80010, 0x0a000a00},
{0x80014, 0x02800000},
{0x80018, 0x01e00000},
{0x8001C, 0x00000000},
{0x80020, 0x01e00280},
{0x80024, 0x02fa027f},
{0x80028, 0x004a0280},
{0x8002C, 0x020c01df},
{0x80030, 0x000201e7},
{0x80200, 0x00010000},
{0x00008, 0x20000000}, /* gpio29 is pwm0, LED_PWM */
{0x0000C, 0x3f000000}, /* gpio56 - gpio61 as flat panel data pins */
{0x10020, 0x25725728}, /* 20 kHz pwm0, 50 % duty cycle, disabled */
{0x80000, 0x0f010106}, /* vsync & hsync pos, disp on */
{0, 0}
};
/*
* Return a pointer to the register initialization table.
*/
const SMI_REGS *board_get_regs(void)
{
return sm502_init_regs;
}
int board_get_width(void)
{
return DISPLAY_WIDTH;
}
int board_get_height(void)
{
return DISPLAY_HEIGHT;
}
#ifdef CONFIG_CONSOLE_EXTRA_INFO
/*
* Return text to be printed besides the logo.
*/
void video_get_info_str(int line_number, char *info)
{
if (line_number == 1)
strcpy(info, " Board: ICON");
else
info[0] = '\0';
}
#endif
#endif /* CONFIG_VIDEO_SM501 */