u-boot/board/friendlyarm/mini2440/mini2440.c

119 lines
2.7 KiB
C
Raw Normal View History

/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2009
* Michel Pollet <buserror@gmail.com>
*
* (C) Copyright 2012
* Gabriel Huau <contact@huau-gabriel.fr>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/s3c2440.h>
#include <asm/arch/iomux.h>
#include <asm/arch/gpio.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <netdev.h>
#include "mini2440.h"
DECLARE_GLOBAL_DATA_PTR;
static inline void pll_delay(unsigned long loops)
{
__asm__ volatile ("1:\n"
"subs %0, %1, #1\n"
"bne 1b" : "=r" (loops) : "0" (loops));
}
int board_early_init_f(void)
{
struct s3c24x0_clock_power * const clk_power =
s3c24x0_get_base_clock_power();
/* to reduce PLL lock time, adjust the LOCKTIME register */
clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */
clk_power->clkdivn = CLKDIVN_VAL;
/* configure UPLL */
clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
/* some delay between MPLL and UPLL */
pll_delay(100);
/* configure MPLL */
clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
/* some delay between MPLL and UPLL */
pll_delay(10000);
return 0;
}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* IOMUX Port H : UART Configuration */
gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 |
IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2;
gpio_direction_output(GPH8, 0);
gpio_direction_output(GPH9, 0);
gpio_direction_output(GPH10, 0);
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR;
return 0;
}
int dram_init(void)
{
struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl();
/*
* Configuring bus width and timing
* Initialize clocks for each bank 0..5
* Bank 3 and 4 are used for DM9000
*/
writel(BANK_CONF, &memctl->bwscon);
writel(B0_CONF, &memctl->bankcon[0]);
writel(B1_CONF, &memctl->bankcon[1]);
writel(B2_CONF, &memctl->bankcon[2]);
writel(B3_CONF, &memctl->bankcon[3]);
writel(B4_CONF, &memctl->bankcon[4]);
writel(B5_CONF, &memctl->bankcon[5]);
/* Bank 6 and 7 are used for DRAM */
writel(SDRAM_64MB, &memctl->bankcon[6]);
writel(SDRAM_64MB, &memctl->bankcon[7]);
writel(MEM_TIMING, &memctl->refresh);
writel(BANKSIZE_CONF, &memctl->banksize);
writel(B6_MRSR, &memctl->mrsrb6);
writel(B7_MRSR, &memctl->mrsrb7);
gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_SIZE);
return 0;
}
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_DRIVER_DM9000
return dm9000_initialize(bis);
#else
return 0;
#endif
}