u-boot/include/asm-sparc/leon2.h

237 lines
9.2 KiB
C
Raw Normal View History

/* LEON2 header file. LEON2 is a SOC processor.
*
* (C) Copyright 2008
* Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#ifndef __LEON2_H__
#define __LEON2_H__
#ifdef CONFIG_LEON2
/* LEON 2 I/O register definitions */
#define LEON2_PREGS 0x80000000
#define LEON2_MCFG1 0x00
#define LEON2_MCFG2 0x04
#define LEON2_ECTRL 0x08
#define LEON2_FADDR 0x0C
#define LEON2_MSTAT 0x10
#define LEON2_CCTRL 0x14
#define LEON2_PWDOWN 0x18
#define LEON2_WPROT1 0x1C
#define LEON2_WPROT2 0x20
#define LEON2_LCONF 0x24
#define LEON2_TCNT0 0x40
#define LEON2_TRLD0 0x44
#define LEON2_TCTRL0 0x48
#define LEON2_TCNT1 0x50
#define LEON2_TRLD1 0x54
#define LEON2_TCTRL1 0x58
#define LEON2_SCNT 0x60
#define LEON2_SRLD 0x64
#define LEON2_UART0 0x70
#define LEON2_UDATA0 0x70
#define LEON2_USTAT0 0x74
#define LEON2_UCTRL0 0x78
#define LEON2_USCAL0 0x7C
#define LEON2_UART1 0x80
#define LEON2_UDATA1 0x80
#define LEON2_USTAT1 0x84
#define LEON2_UCTRL1 0x88
#define LEON2_USCAL1 0x8C
#define LEON2_IMASK 0x90
#define LEON2_IPEND 0x94
#define LEON2_IFORCE 0x98
#define LEON2_ICLEAR 0x9C
#define LEON2_IOREG 0xA0
#define LEON2_IODIR 0xA4
#define LEON2_IOICONF 0xA8
#define LEON2_IPEND2 0xB0
#define LEON2_IMASK2 0xB4
#define LEON2_ISTAT2 0xB8
#define LEON2_ICLEAR2 0xBC
#ifndef __ASSEMBLER__
/*
* Structure for LEON memory mapped registers.
*
* Source: Section 6.1 - On-chip registers
*
* NOTE: There is only one of these structures per CPU, its base address
* is 0x80000000, and the variable LEON_REG is placed there by the
* linkcmds file.
*/
typedef struct {
volatile unsigned int Memory_Config_1;
volatile unsigned int Memory_Config_2;
volatile unsigned int Edac_Control;
volatile unsigned int Failed_Address;
volatile unsigned int Memory_Status;
volatile unsigned int Cache_Control;
volatile unsigned int Power_Down;
volatile unsigned int Write_Protection_1;
volatile unsigned int Write_Protection_2;
volatile unsigned int Leon_Configuration;
volatile unsigned int dummy2;
volatile unsigned int dummy3;
volatile unsigned int dummy4;
volatile unsigned int dummy5;
volatile unsigned int dummy6;
volatile unsigned int dummy7;
volatile unsigned int Timer_Counter_1;
volatile unsigned int Timer_Reload_1;
volatile unsigned int Timer_Control_1;
volatile unsigned int Watchdog;
volatile unsigned int Timer_Counter_2;
volatile unsigned int Timer_Reload_2;
volatile unsigned int Timer_Control_2;
volatile unsigned int dummy8;
volatile unsigned int Scaler_Counter;
volatile unsigned int Scaler_Reload;
volatile unsigned int dummy9;
volatile unsigned int dummy10;
volatile unsigned int UART_Channel_1;
volatile unsigned int UART_Status_1;
volatile unsigned int UART_Control_1;
volatile unsigned int UART_Scaler_1;
volatile unsigned int UART_Channel_2;
volatile unsigned int UART_Status_2;
volatile unsigned int UART_Control_2;
volatile unsigned int UART_Scaler_2;
volatile unsigned int Interrupt_Mask;
volatile unsigned int Interrupt_Pending;
volatile unsigned int Interrupt_Force;
volatile unsigned int Interrupt_Clear;
volatile unsigned int PIO_Data;
volatile unsigned int PIO_Direction;
volatile unsigned int PIO_Interrupt;
} LEON2_regs;
typedef struct {
volatile unsigned int UART_Channel;
volatile unsigned int UART_Status;
volatile unsigned int UART_Control;
volatile unsigned int UART_Scaler;
} LEON2_Uart_regs;
#endif
/*
* The following constants are intended to be used ONLY in assembly
* language files.
*
* NOTE: The intended style of usage is to load the address of LEON REGS
* into a register and then use these as displacements from
* that register.
*/
#define LEON_REG_MEMCFG1_OFFSET 0x00
#define LEON_REG_MEMCFG2_OFFSET 0x04
#define LEON_REG_EDACCTRL_OFFSET 0x08
#define LEON_REG_FAILADDR_OFFSET 0x0C
#define LEON_REG_MEMSTATUS_OFFSET 0x10
#define LEON_REG_CACHECTRL_OFFSET 0x14
#define LEON_REG_POWERDOWN_OFFSET 0x18
#define LEON_REG_WRITEPROT1_OFFSET 0x1C
#define LEON_REG_WRITEPROT2_OFFSET 0x20
#define LEON_REG_LEONCONF_OFFSET 0x24
#define LEON_REG_UNIMPLEMENTED_2_OFFSET 0x28
#define LEON_REG_UNIMPLEMENTED_3_OFFSET 0x2C
#define LEON_REG_UNIMPLEMENTED_4_OFFSET 0x30
#define LEON_REG_UNIMPLEMENTED_5_OFFSET 0x34
#define LEON_REG_UNIMPLEMENTED_6_OFFSET 0x38
#define LEON_REG_UNIMPLEMENTED_7_OFFSET 0x3C
#define LEON_REG_TIMERCNT1_OFFSET 0x40
#define LEON_REG_TIMERLOAD1_OFFSET 0x44
#define LEON_REG_TIMERCTRL1_OFFSET 0x48
#define LEON_REG_WDOG_OFFSET 0x4C
#define LEON_REG_TIMERCNT2_OFFSET 0x50
#define LEON_REG_TIMERLOAD2_OFFSET 0x54
#define LEON_REG_TIMERCTRL2_OFFSET 0x58
#define LEON_REG_UNIMPLEMENTED_8_OFFSET 0x5C
#define LEON_REG_SCALERCNT_OFFSET 0x60
#define LEON_REG_SCALER_LOAD_OFFSET 0x64
#define LEON_REG_UNIMPLEMENTED_9_OFFSET 0x68
#define LEON_REG_UNIMPLEMENTED_10_OFFSET 0x6C
#define LEON_REG_UARTDATA1_OFFSET 0x70
#define LEON_REG_UARTSTATUS1_OFFSET 0x74
#define LEON_REG_UARTCTRL1_OFFSET 0x78
#define LEON_REG_UARTSCALER1_OFFSET 0x7C
#define LEON_REG_UARTDATA2_OFFSET 0x80
#define LEON_REG_UARTSTATUS2_OFFSET 0x84
#define LEON_REG_UARTCTRL2_OFFSET 0x88
#define LEON_REG_UARTSCALER2_OFFSET 0x8C
#define LEON_REG_IRQMASK_OFFSET 0x90
#define LEON_REG_IRQPEND_OFFSET 0x94
#define LEON_REG_IRQFORCE_OFFSET 0x98
#define LEON_REG_IRQCLEAR_OFFSET 0x9C
#define LEON_REG_PIODATA_OFFSET 0xA0
#define LEON_REG_PIODIR_OFFSET 0xA4
#define LEON_REG_PIOIRQ_OFFSET 0xA8
#define LEON_REG_SIM_RAM_SIZE_OFFSET 0xF4
#define LEON_REG_SIM_ROM_SIZE_OFFSET 0xF8
/*
* Interrupt Sources
*
* The interrupt source numbers directly map to the trap type and to
* the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask,
* and the Interrupt Pending Registers.
*/
#define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR 1
#define LEON_INTERRUPT_UART_1_RX_TX 2
#define LEON_INTERRUPT_UART_0_RX_TX 3
#define LEON_INTERRUPT_EXTERNAL_0 4
#define LEON_INTERRUPT_EXTERNAL_1 5
#define LEON_INTERRUPT_EXTERNAL_2 6
#define LEON_INTERRUPT_EXTERNAL_3 7
#define LEON_INTERRUPT_TIMER1 8
#define LEON_INTERRUPT_TIMER2 9
#define LEON_INTERRUPT_EMPTY1 10
#define LEON_INTERRUPT_EMPTY2 11
#define LEON_INTERRUPT_OPEN_ETH 12
#define LEON_INTERRUPT_EMPTY4 13
#define LEON_INTERRUPT_EMPTY5 14
#define LEON_INTERRUPT_EMPTY6 15
/* Timer Bits */
#define LEON2_TIMER_CTRL_EN 0x1 /* Timer enable */
#define LEON2_TIMER_CTRL_RS 0x2 /* Timer reStart */
#define LEON2_TIMER_CTRL_LD 0x4 /* Timer reLoad */
#define LEON2_TIMER1_IRQNO 8 /* Timer 1 IRQ number */
#define LEON2_TIMER2_IRQNO 9 /* Timer 2 IRQ number */
#define LEON2_TIMER1_IE (1<<LEON2_TIMER1_IRQNO) /* Timer 1 interrupt enable */
#define LEON2_TIMER2_IE (1<<LEON2_TIMER2_IRQNO) /* Timer 2 interrupt enable */
/* UART bits */
#define LEON2_UART_CTRL_RE 1 /* UART Receiver enable */
#define LEON2_UART_CTRL_TE 2 /* UART Transmitter enable */
#define LEON2_UART_CTRL_RI 4 /* UART Receiver Interrupt enable */
#define LEON2_UART_CTRL_TI 8 /* UART Transmitter Interrupt enable */
#define LEON2_UART_CTRL_DBG (1<<11) /* Debug Bit used by GRMON */
#define LEON2_UART_STAT_DR 1 /* UART Data Ready */
#define LEON2_UART_STAT_TSE 2 /* UART Transmit Shift Reg empty */
#define LEON2_UART_STAT_THE 4 /* UART Transmit Hold Reg empty */
#else
#error Include LEON2 header file only if LEON2 processor
#endif
#endif