u-boot/include/configs/nas220.h

140 lines
3.1 KiB
C
Raw Normal View History

/*
* Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
*
* based on work from:
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_NAS220_H
#define _CONFIG_NAS220_H
/*
* Machine type ID
*/
#define CONFIG_MACH_TYPE MACH_TYPE_RD88F6192_NAS
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */
#define CONFIG_KW88F6192 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/* power-on led, regulator, sata0, sata1 */
#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
#define NAS220_GE_OE_VAL_HIGH (0)
#define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
#define NAS220_GE_OE_HIGH (~(0))
/* PHY related */
#define MV88E1116_LED_FCTRL_REG 10
#define MV88E1116_CPRSP_CR3_REG 21
#define MV88E1116_MAC_CTRL_REG 21
#define MV88E1116_PGADR_REG 22
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
/*
* Commands configuration
*/
#define CONFIG_CMD_NAND
#define CONFIG_CMD_DATE
#define CONFIG_CMD_IDE
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
/*
* Environment variables configurations
*/
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE 0x10000
#else
#define CONFIG_ENV_IS_NOWHERE
#endif
#define CONFIG_ENV_SIZE 0x10000
#define CONFIG_ENV_OFFSET 0xa0000
/*
* Default environment variables
*/
#define CONFIG_BOOTCOMMAND ""
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootargs=console=ttyS0,115200\0" \
"mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
"0x010000@0xa0000(env),"\
"0x500000@0xc0000(uimage),"\
"0x1a40000@0x5c0000(rootfs)\0" \
"mtdids=nand0=orion_nand\0"\
"bootdelay=-1\0"\
"autostart=no\0"\
"autoload=no\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 8
#endif /* CONFIG_CMD_NET */
/*
* USB/EHCI
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI /* Enable EHCI USB support */
#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_SUPPORT_VFAT
#endif /* CONFIG_CMD_USB */
/*
* File system
*/
#define CONFIG_CMD_JFFS2
#define CONFIG_JFFS2_NAND
#define CONFIG_JFFS2_LZO
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_LZO
/*
* SATA
*/
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
#endif
/*
* EFI partition
*/
/*
* Date Time
*/
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */
#define CONFIG_KIRKWOOD_GPIO
#endif /* _CONFIG_NAS220_H */