u-boot/tools/gdb/gdbsend.c

122 lines
2.4 KiB
C
Raw Normal View History

Patches by Murray Jensen, 17 Jun 2003: - Hymod board database mods: add "who" field and new xilinx chip types - provide new "init_cmd_timeout()" function so code external to "common/main.c" can use the "reset_cmd_timeout()" function before entering the main loop - add DTT support for adm1021 (new file dtt/adm1021.c; config slightly different. see include/configs/hymod.h for an example (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and CFG_DTT_ADM1021 defined) - add new "eeprom_probe()" function which has similar args and behaves in a similar way to "eeprom_read()" etc. - add 8260 FCC ethernet loopback code (new "eth_loopback_test()" function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST) - gdbtools copyright update - ensure that set_msr() executes the "sync" and "isync" instructions after the "mtmsr" instruction in cpu/mpc8260/interrupts.c - 8260 I/O ports fix: Open Drain should be set last when configuring - add SIU IRQ defines for 8260 - allow LDSCRIPT override and OBJCFLAGS initialization: change to config.mk to allow board configurations to override the GNU linker script, selected via the LDSCRIPT, make variable, and to give an initial value to the OBJCFLAGS make variable - 8260 i2c enhancement: o correctly extends the timeout depending on the size of all queued messages for both transmit and receive o will not continue with receive if transmit times out o ensures that the error callback is done for all queued tx and rx messages o correctly detects both tx and rx timeouts, only delivers one to the callback, and does not overwrite an earlier error o logic in i2c_probe now correct - add "vprintf()" function so that "panic()" function can be technically correct - many Hymod board changes
2003-06-19 23:40:20 +00:00
/*
* (C) Copyright 2000
* Murray Jensen <Murray.Jensen@csiro.au>
*
* SPDX-License-Identifier: GPL-2.0+
Patches by Murray Jensen, 17 Jun 2003: - Hymod board database mods: add "who" field and new xilinx chip types - provide new "init_cmd_timeout()" function so code external to "common/main.c" can use the "reset_cmd_timeout()" function before entering the main loop - add DTT support for adm1021 (new file dtt/adm1021.c; config slightly different. see include/configs/hymod.h for an example (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and CFG_DTT_ADM1021 defined) - add new "eeprom_probe()" function which has similar args and behaves in a similar way to "eeprom_read()" etc. - add 8260 FCC ethernet loopback code (new "eth_loopback_test()" function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST) - gdbtools copyright update - ensure that set_msr() executes the "sync" and "isync" instructions after the "mtmsr" instruction in cpu/mpc8260/interrupts.c - 8260 I/O ports fix: Open Drain should be set last when configuring - add SIU IRQ defines for 8260 - allow LDSCRIPT override and OBJCFLAGS initialization: change to config.mk to allow board configurations to override the GNU linker script, selected via the LDSCRIPT, make variable, and to give an initial value to the OBJCFLAGS make variable - 8260 i2c enhancement: o correctly extends the timeout depending on the size of all queued messages for both transmit and receive o will not continue with receive if transmit times out o ensures that the error callback is done for all queued tx and rx messages o correctly detects both tx and rx timeouts, only delivers one to the callback, and does not overwrite an earlier error o logic in i2c_probe now correct - add "vprintf()" function so that "panic()" function can be technically correct - many Hymod board changes
2003-06-19 23:40:20 +00:00
*/
2000-10-11 22:04:29 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include "serial.h"
#include "error.h"
#include "remote.h"
char *serialdev = "/dev/term/b";
speed_t speed = B230400;
int verbose = 0, docont = 0;
unsigned long addr = 0x10000UL;
int
main(int ac, char **av)
{
int c, sfd, ifd;
char *ifn, *image;
struct stat ist;
if ((pname = strrchr(av[0], '/')) == NULL)
pname = av[0];
else
pname++;
while ((c = getopt(ac, av, "a:b:cp:v")) != EOF)
switch (c) {
case 'a': {
char *ep;
addr = strtol(optarg, &ep, 0);
if (ep == optarg || *ep != '\0')
Error("can't decode address specified in -a option");
break;
}
case 'b':
if ((speed = cvtspeed(optarg)) == B0)
Error("can't decode baud rate specified in -b option");
break;
case 'c':
docont = 1;
break;
case 'p':
serialdev = optarg;
break;
case 'v':
verbose = 1;
break;
default:
usage:
fprintf(stderr,
"Usage: %s [-a addr] [-b bps] [-c] [-p dev] [-v] imagefile\n",
pname);
exit(1);
}
if (optind != ac - 1)
goto usage;
ifn = av[optind++];
if (verbose)
fprintf(stderr, "Opening file and reading image...\n");
if ((ifd = open(ifn, O_RDONLY)) < 0)
Perror("can't open kernel image file '%s'", ifn);
if (fstat(ifd, &ist) < 0)
Perror("fstat '%s' failed", ifn);
if ((image = (char *)malloc(ist.st_size)) == NULL)
Perror("can't allocate %ld bytes for image", ist.st_size);
if ((c = read(ifd, image, ist.st_size)) < 0)
Perror("read of %d bytes from '%s' failed", ist.st_size, ifn);
if (c != ist.st_size)
Error("read of %ld bytes from '%s' failed (%d)", ist.st_size, ifn, c);
if (close(ifd) < 0)
Perror("close of '%s' failed", ifn);
if (verbose)
fprintf(stderr, "Opening serial port and sending image...\n");
if ((sfd = serialopen(serialdev, speed)) < 0)
Perror("open of serial device '%s' failed", serialdev);
remote_desc = sfd;
remote_reset();
remote_write_bytes(addr, image, ist.st_size);
if (docont) {
if (verbose)
fprintf(stderr, "[continue]");
remote_continue();
}
if (serialclose(sfd) < 0)
Perror("close of serial device '%s' failed", serialdev);
if (verbose)
fprintf(stderr, "Done.\n");
return (0);
}