u-boot/board/armltd/integrator/pci.c

397 lines
13 KiB
C
Raw Normal View History

/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2003
* Texas Instruments, <www.ti.com>
* Kshitij Gupta <Kshitij@ti.com>
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <pci.h>
/*
* Initialize PCI Devices, report devices found.
*/
#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_integrator_config_table[] = {
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
{ }
};
#endif /* CONFIG_PCI_PNP */
/* V3 access routines */
#define _V3Write16(o,v) (*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned short)(v))
#define _V3Read16(o) (*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)))
#define _V3Write32(o,v) (*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned int)(v))
#define _V3Read32(o) (*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)))
/* Compute address necessary to access PCI config space for the given */
/* bus and device. */
#define PCI_CONFIG_ADDRESS( __bus, __devfn, __offset ) ({ \
unsigned int __address, __devicebit; \
unsigned short __mapaddress; \
unsigned int __dev = PCI_DEV (__devfn); /* FIXME to check!! (slot?) */ \
\
if (__bus == 0) { \
/* local bus segment so need a type 0 config cycle */ \
/* build the PCI configuration "address" with one-hot in A31-A11 */ \
__address = PCI_CONFIG_BASE; \
__address |= ((__devfn & 0x07) << 8); \
__address |= __offset & 0xFF; \
__mapaddress = 0x000A; /* 101=>config cycle, 0=>A1=A0=0 */ \
__devicebit = (1 << (__dev + 11)); \
\
if ((__devicebit & 0xFF000000) != 0) { \
/* high order bits are handled by the MAP register */ \
__mapaddress |= (__devicebit >> 16); \
} else { \
/* low order bits handled directly in the address */ \
__address |= __devicebit; \
} \
} else { /* bus !=0 */ \
/* not the local bus segment so need a type 1 config cycle */ \
/* A31-A24 are don't care (so clear to 0) */ \
__mapaddress = 0x000B; /* 101=>config cycle, 1=>A1&A0 from PCI_CFG */ \
__address = PCI_CONFIG_BASE; \
__address |= ((__bus & 0xFF) << 16); /* bits 23..16 = bus number */ \
__address |= ((__dev & 0x1F) << 11); /* bits 15..11 = device number */ \
__address |= ((__devfn & 0x07) << 8); /* bits 10..8 = function number */ \
__address |= __offset & 0xFF; /* bits 7..0 = register number */ \
} \
_V3Write16 (V3_LB_MAP1, __mapaddress); \
__address; \
})
/* _V3OpenConfigWindow - open V3 configuration window */
#define _V3OpenConfigWindow() { \
/* Set up base0 to see all 512Mbytes of memory space (not */ \
/* prefetchable), this frees up base1 for re-use by configuration*/ \
/* memory */ \
\
_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \
0x90 | V3_LB_BASE_M_ENABLE)); \
/* Set up base1 to point into configuration space, note that MAP1 */ \
/* register is set up by pciMakeConfigAddress(). */ \
\
_V3Write32 (V3_LB_BASE1, ((CPU_PCI_CNFG_ADRS & 0xFFF00000) | \
0x40 | V3_LB_BASE_M_ENABLE)); \
}
/* _V3CloseConfigWindow - close V3 configuration window */
#define _V3CloseConfigWindow() { \
/* Reassign base1 for use by prefetchable PCI memory */ \
_V3Write32 (V3_LB_BASE1, (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) \
| 0x84 | V3_LB_BASE_M_ENABLE)); \
_V3Write16 (V3_LB_MAP1, \
(((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) >> 16) | 0x0006); \
\
/* And shrink base0 back to a 256M window (NOTE: MAP0 already correct) */ \
\
_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) | \
0x80 | V3_LB_BASE_M_ENABLE)); \
}
static int pci_integrator_read_byte (struct pci_controller *hose, pci_dev_t dev,
int offset, unsigned char *val)
{
_V3OpenConfigWindow ();
*val = *(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset);
_V3CloseConfigWindow ();
return 0;
}
static int pci_integrator_read__word (struct pci_controller *hose,
pci_dev_t dev, int offset,
unsigned short *val)
{
_V3OpenConfigWindow ();
*val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset);
_V3CloseConfigWindow ();
return 0;
}
static int pci_integrator_read_dword (struct pci_controller *hose,
pci_dev_t dev, int offset,
unsigned int *val)
{
_V3OpenConfigWindow ();
*val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset);
*val |= (*(volatile unsigned int *)
PCI_CONFIG_ADDRESS (PCI_BUS (dev), PCI_FUNC (dev),
(offset + 2))) << 16;
_V3CloseConfigWindow ();
return 0;
}
static int pci_integrator_write_byte (struct pci_controller *hose,
pci_dev_t dev, int offset,
unsigned char val)
{
_V3OpenConfigWindow ();
*(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset) = val;
_V3CloseConfigWindow ();
return 0;
}
static int pci_integrator_write_word (struct pci_controller *hose,
pci_dev_t dev, int offset,
unsigned short val)
{
_V3OpenConfigWindow ();
*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset) = val;
_V3CloseConfigWindow ();
return 0;
}
static int pci_integrator_write_dword (struct pci_controller *hose,
pci_dev_t dev, int offset,
unsigned int val)
{
_V3OpenConfigWindow ();
*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
offset) = (val & 0xFFFF);
*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
PCI_FUNC (dev),
(offset + 2)) = ((val >> 16) & 0xFFFF);
_V3CloseConfigWindow ();
return 0;
}
/******************************
* PCI initialisation
******************************/
struct pci_controller integrator_hose = {
#ifndef CONFIG_PCI_PNP
config_table: pci_integrator_config_table,
#endif
};
void pci_init_board (void)
{
volatile int i, j;
struct pci_controller *hose = &integrator_hose;
/* setting this register will take the V3 out of reset */
*(volatile unsigned int *) (INTEGRATOR_SC_PCIENABLE) = 1;
/* wait a few usecs to settle the device and the PCI bus */
for (i = 0; i < 100; i++)
j = i + 1;
/* Now write the Base I/O Address Word to V3_BASE + 0x6C */
*(volatile unsigned short *) (V3_BASE + V3_LB_IO_BASE) =
(unsigned short) (V3_BASE >> 16);
do {
*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) = 0xAA;
*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA + 4) =
0x55;
} while (*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) != 0xAA
|| *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA +
4) != 0x55);
/* Make sure that V3 register access is not locked, if it is, unlock it */
if ((*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &
V3_SYSTEM_M_LOCK)
== V3_SYSTEM_M_LOCK)
*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) = 0xA05F;
/* Ensure that the slave accesses from PCI are disabled while we */
/* setup windows */
*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) &=
~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN);
/* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */
*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &=
~V3_SYSTEM_M_RST_OUT;
/* Make all accesses from PCI space retry until we're ready for them */
*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) |=
V3_PCI_CFG_M_RETRY_EN;
/* Set up any V3 PCI Configuration Registers that we absolutely have to */
/* LB_CFG controls Local Bus protocol. */
/* Enable LocalBus byte strobes for READ accesses too. */
/* set bit 7 BE_IMODE and bit 6 BE_OMODE */
*(volatile unsigned short *) (V3_BASE + V3_LB_CFG) |= 0x0C0;
/* PCI_CMD controls overall PCI operation. */
/* Enable PCI bus master. */
*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) |= 0x04;
/* PCI_MAP0 controls where the PCI to CPU memory window is on Local Bus */
*(volatile unsigned int *) (V3_BASE + V3_PCI_MAP0) =
(INTEGRATOR_BOOT_ROM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_512M |
V3_PCI_MAP_M_REG_EN |
V3_PCI_MAP_M_ENABLE);
/* PCI_BASE0 is the PCI address of the start of the window */
*(volatile unsigned int *) (V3_BASE + V3_PCI_BASE0) =
INTEGRATOR_BOOT_ROM_BASE;
/* PCI_MAP1 is LOCAL address of the start of the window */
*(volatile unsigned int *) (V3_BASE + V3_PCI_MAP1) =
(INTEGRATOR_HDR0_SDRAM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_1024M |
V3_PCI_MAP_M_REG_EN |
V3_PCI_MAP_M_ENABLE);
/* PCI_BASE1 is the PCI address of the start of the window */
*(volatile unsigned int *) (V3_BASE + V3_PCI_BASE1) =
INTEGRATOR_HDR0_SDRAM_BASE;
/* Set up the windows from local bus memory into PCI configuration, */
/* I/O and Memory. */
/* PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. */
*(volatile unsigned short *) (V3_BASE + V3_LB_BASE2) =
((CPU_PCI_IO_ADRS >> 24) << 8) | V3_LB_BASE_M_ENABLE;
*(volatile unsigned short *) (V3_BASE + V3_LB_MAP2) = 0;
/* PCI Configuration, use LB_BASE1/LB_MAP1. */
/* PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 */
/* Map first 256Mbytes as non-prefetchable via BASE0/MAP0 */
/* (INTEGRATOR_PCI_BASE == PCI_MEM_BASE) */
*(volatile unsigned int *) (V3_BASE + V3_LB_BASE0) =
INTEGRATOR_PCI_BASE | (0x80 | V3_LB_BASE_M_ENABLE);
*(volatile unsigned short *) (V3_BASE + V3_LB_MAP0) =
((INTEGRATOR_PCI_BASE >> 20) << 0x4) | 0x0006;
/* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */
*(volatile unsigned int *) (V3_BASE + V3_LB_BASE1) =
INTEGRATOR_PCI_BASE | (0x84 | V3_LB_BASE_M_ENABLE);
*(volatile unsigned short *) (V3_BASE + V3_LB_MAP1) =
(((INTEGRATOR_PCI_BASE + 0x10000000) >> 20) << 4) | 0x0006;
/* Allow accesses to PCI Configuration space */
/* and set up A1, A0 for type 1 config cycles */
*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) =
((*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG)) &
~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1)) |
V3_PCI_CFG_M_AD_LOW0;
/* now we can allow in PCI MEMORY accesses */
*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) =
(*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD)) |
V3_COMMAND_M_MEM_EN;
/* Set RST_OUT to take the PCI bus is out of reset, PCI devices can */
/* initialise and lock the V3 system register so that no one else */
/* can play with it */
*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
(*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
V3_SYSTEM_M_RST_OUT;
*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
(*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
V3_SYSTEM_M_LOCK;
/*
* Register the hose
*/
hose->first_busno = 0;
hose->last_busno = 0xff;
/* System memory space */
pci_set_region (hose->regions + 0,
0x00000000, 0x40000000, 0x01000000,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
/* PCI Memory - config space */
pci_set_region (hose->regions + 1,
0x00000000, 0x62000000, 0x01000000, PCI_REGION_MEM);
/* PCI V3 regs */
pci_set_region (hose->regions + 2,
0x00000000, 0x61000000, 0x00080000, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region (hose->regions + 3,
0x00000000, 0x60000000, 0x00010000, PCI_REGION_IO);
pci_set_ops (hose,
pci_integrator_read_byte,
pci_integrator_read__word,
pci_integrator_read_dword,
pci_integrator_write_byte,
pci_integrator_write_word, pci_integrator_write_dword);
hose->region_count = 4;
pci_register_hose (hose);
pciauto_config_init (hose);
pciauto_config_device (hose, 0);
hose->last_busno = pci_hose_scan (hose);
}