u-boot/board/armadeus/apf27/apf27.h

490 lines
16 KiB
C
Raw Normal View History

/*
* Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __APF27_H
#define __APF27_H
/* FPGA program pin configuration */
#define ACFG_FPGA_PWR (GPIO_PORTF | 19) /* FPGA prog pin */
#define ACFG_FPGA_PRG (GPIO_PORTF | 11) /* FPGA prog pin */
#define ACFG_FPGA_CLK (GPIO_PORTF | 15) /* FPGA clk pin */
#define ACFG_FPGA_RDATA 0xD6000000 /* FPGA data addr */
#define ACFG_FPGA_WDATA 0xD6000000 /* FPGA data addr */
#define ACFG_FPGA_INIT (GPIO_PORTF | 12) /* FPGA init pin */
#define ACFG_FPGA_DONE (GPIO_PORTF | 9) /* FPGA done pin */
#define ACFG_FPGA_RW (GPIO_PORTF | 21) /* FPGA done pin */
#define ACFG_FPGA_CS (GPIO_PORTF | 22) /* FPGA done pin */
#define ACFG_FPGA_SUSPEND (GPIO_PORTF | 10) /* FPGA done pin */
#define ACFG_FPGA_RESET (GPIO_PORTF | 7) /* FPGA done pin */
/* MMC pin */
#define PC_PWRON (GPIO_PORTF | 16)
/*
* MPU CLOCK source before PLL
* ACFG_CLK_FREQ (2/3 MPLL clock or ext 266 MHZ)
*/
#define ACFG_MPCTL0_VAL 0x01EF15D5 /* 399.000 MHz */
#define ACFG_MPCTL1_VAL 0
#define CONFIG_MPLL_FREQ 399
#define ACFG_CLK_FREQ (CONFIG_MPLL_FREQ*2/3) /* 266 MHz */
/* Serial clock source before PLL (should be named ACFG_SYSPLL_CLK_FREQ)*/
#define ACFG_SPCTL0_VAL 0x0475206F /* 299.99937 MHz */
#define ACFG_SPCTL1_VAL 0
#define CONFIG_SPLL_FREQ 300 /* MHz */
/* ARM bus frequency (have to be a CONFIG_MPLL_FREQ ratio) */
#define CONFIG_ARM_FREQ 399 /* up to 400 MHz */
/* external bus frequency (have to be a ACFG_CLK_FREQ ratio) */
#define CONFIG_HCLK_FREQ 133 /* (ACFG_CLK_FREQ/2) */
#define CONFIG_PERIF1_FREQ 16 /* 16.625 MHz UART, GPT, PWM */
#define CONFIG_PERIF2_FREQ 33 /* 33.25 MHz CSPI and SDHC */
#define CONFIG_PERIF3_FREQ 33 /* 33.25 MHz LCD */
#define CONFIG_PERIF4_FREQ 33 /* 33.25 MHz CSI */
#define CONFIG_SSI1_FREQ 66 /* 66.50 MHz SSI1 */
#define CONFIG_SSI2_FREQ 66 /* 66.50 MHz SSI2 */
#define CONFIG_MSHC_FREQ 66 /* 66.50 MHz MSHC */
#define CONFIG_H264_FREQ 66 /* 66.50 MHz H264 */
#define CONFIG_CLK0_DIV 3 /* Divide CLK0 by 4 */
#define CONFIG_CLK0_EN 1 /* CLK0 enabled */
/* external bus frequency (have to be a CONFIG_HCLK_FREQ ratio) */
#define CONFIG_NFC_FREQ 44 /* NFC Clock up to 44 MHz wh 133MHz */
/* external serial bus frequency (have to be a CONFIG_SPLL_FREQ ratio) */
#define CONFIG_USB_FREQ 60 /* 60 MHz */
/*
* SDRAM
*/
#if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
/* micron 64MB */
#define ACFG_SDRAM_NUM_COL 9 /* 8, 9, 10 or 11
* column address bits
*/
#define ACFG_SDRAM_NUM_ROW 13 /* 11, 12 or 13
* row address bits
*/
#define ACFG_SDRAM_REFRESH 3 /* 0=OFF 1=2048
* 2=4096 3=8192 refresh
*/
#define ACFG_SDRAM_EXIT_PWD 25 /* ns exit power
* down delay
*/
#define ACFG_SDRAM_W2R_DELAY 1 /* write to read
* cycle delay > 0
*/
#define ACFG_SDRAM_ROW_PRECHARGE_DELAY 18 /* ns */
#define ACFG_SDRAM_TMRD_DELAY 2 /* Load mode register
* cycle delay 1..4
*/
#define ACFG_SDRAM_TWR_DELAY 1 /* LPDDR: 0=2ck 1=3ck
* SDRAM: 0=1ck 1=2ck
*/
#define ACFG_SDRAM_RAS_DELAY 42 /* ns ACTIVE-to-PRECHARGE delay */
#define ACFG_SDRAM_RRD_DELAY 12 /* ns ACTIVE-to-ACTIVE delay */
#define ACFG_SDRAM_RCD_DELAY 18 /* ns Row to Column delay */
#define ACFG_SDRAM_RC_DELAY 70 /* ns Row cycle delay (tRFC
* refresh to command)
*/
#define ACFG_SDRAM_CLOCK_CYCLE_CL_1 0 /* ns clock cycle time
* estimated fo CL=1
* 0=force 3 for lpddr
*/
#define ACFG_SDRAM_PARTIAL_ARRAY_SR 0 /* 0=full 1=half 2=quater
* 3=Eighth 4=Sixteenth
*/
#define ACFG_SDRAM_DRIVE_STRENGH 0 /* 0=Full-strength 1=half
* 2=quater 3=Eighth
*/
#define ACFG_SDRAM_BURST_LENGTH 3 /* 2^N BYTES (N=0..3) */
#define ACFG_SDRAM_SINGLE_ACCESS 0 /* 1= single access
* 0 = Burst mode
*/
#endif
#if (ACFG_SDRAM_MBYTE_SYZE == 128)
/* micron 128MB */
#define ACFG_SDRAM_NUM_COL 9 /* 8, 9, 10 or 11
* column address bits
*/
#define ACFG_SDRAM_NUM_ROW 14 /* 11, 12 or 13
* row address bits
*/
#define ACFG_SDRAM_REFRESH 3 /* 0=OFF 1=2048
* 2=4096 3=8192 refresh
*/
#define ACFG_SDRAM_EXIT_PWD 25 /* ns exit power
* down delay
*/
#define ACFG_SDRAM_W2R_DELAY 1 /* write to read
* cycle delay > 0
*/
#define ACFG_SDRAM_ROW_PRECHARGE_DELAY 18 /* ns */
#define ACFG_SDRAM_TMRD_DELAY 2 /* Load mode register
* cycle delay 1..4
*/
#define ACFG_SDRAM_TWR_DELAY 1 /* LPDDR: 0=2ck 1=3ck
* SDRAM: 0=1ck 1=2ck
*/
#define ACFG_SDRAM_RAS_DELAY 42 /* ns ACTIVE-to-PRECHARGE delay */
#define ACFG_SDRAM_RRD_DELAY 12 /* ns ACTIVE-to-ACTIVE delay */
#define ACFG_SDRAM_RCD_DELAY 18 /* ns Row to Column delay */
#define ACFG_SDRAM_RC_DELAY 70 /* ns Row cycle delay (tRFC
* refresh to command)
*/
#define ACFG_SDRAM_CLOCK_CYCLE_CL_1 0 /* ns clock cycle time
* estimated fo CL=1
* 0=force 3 for lpddr
*/
#define ACFG_SDRAM_PARTIAL_ARRAY_SR 0 /* 0=full 1=half 2=quater
* 3=Eighth 4=Sixteenth
*/
#define ACFG_SDRAM_DRIVE_STRENGH 0 /* 0=Full-strength 1=half
* 2=quater 3=Eighth
*/
#define ACFG_SDRAM_BURST_LENGTH 3 /* 2^N BYTES (N=0..3) */
#define ACFG_SDRAM_SINGLE_ACCESS 0 /* 1= single access
* 0 = Burst mode
*/
#endif
#if (ACFG_SDRAM_MBYTE_SYZE == 256)
/* micron 256MB */
#define ACFG_SDRAM_NUM_COL 10 /* 8, 9, 10 or 11
* column address bits
*/
#define ACFG_SDRAM_NUM_ROW 14 /* 11, 12 or 13
* row address bits
*/
#define ACFG_SDRAM_REFRESH 3 /* 0=OFF 1=2048
* 2=4096 3=8192 refresh
*/
#define ACFG_SDRAM_EXIT_PWD 25 /* ns exit power
* down delay
*/
#define ACFG_SDRAM_W2R_DELAY 1 /* write to read cycle
* delay > 0
*/
#define ACFG_SDRAM_ROW_PRECHARGE_DELAY 18 /* ns */
#define ACFG_SDRAM_TMRD_DELAY 2 /* Load mode register
* cycle delay 1..4
*/
#define ACFG_SDRAM_TWR_DELAY 1 /* LPDDR: 0=2ck 1=3ck
* SDRAM: 0=1ck 1=2ck
*/
#define ACFG_SDRAM_RAS_DELAY 42 /* ns ACTIVE-to-PRECHARGE delay */
#define ACFG_SDRAM_RRD_DELAY 12 /* ns ACTIVE-to-ACTIVE delay */
#define ACFG_SDRAM_RCD_DELAY 18 /* ns Row to Column delay */
#define ACFG_SDRAM_RC_DELAY 70 /* ns Row cycle delay (tRFC
* refresh to command)
*/
#define ACFG_SDRAM_CLOCK_CYCLE_CL_1 0 /* ns clock cycle time
* estimated fo CL=1
* 0=force 3 for lpddr
*/
#define ACFG_SDRAM_PARTIAL_ARRAY_SR 0 /* 0=full 1=half 2=quater
* 3=Eighth 4=Sixteenth
*/
#define ACFG_SDRAM_DRIVE_STRENGH 0 /* 0=Full-strength
* 1=half
* 2=quater
* 3=Eighth
*/
#define ACFG_SDRAM_BURST_LENGTH 3 /* 2^N BYTES (N=0..3) */
#define ACFG_SDRAM_SINGLE_ACCESS 0 /* 1= single access
* 0 = Burst mode
*/
#endif
/*
* External interface
*/
/*
* CSCRxU_VAL:
* 31| x | x | x x |x x x x| x x | x | x |x x x x|16
* |SP |WP | BCD | BCS | PSZ |PME|SYNC| DOL |
*
* 15| x x | x x x x x x | x | x x x x | x x x x |0
* | CNC | WSC |EW | WWS | EDC |
*
* CSCRxL_VAL:
* 31| x x x x | x x x x | x x x x | x x x x |16
* | OEA | OEN | EBWA | EBWN |
* 15|x x x x| x |x x x |x x x x| x | x | x | x | 0
* | CSA |EBC| DSZ | CSN |PSR|CRE|WRAP|CSEN|
*
* CSCRxA_VAL:
* 31| x x x x | x x x x | x x x x | x x x x |16
* | EBRA | EBRN | RWA | RWN |
* 15| x | x x |x x x|x x|x x|x x| x | x | x | x | 0
* |MUM| LAH | LBN |LBA|DWW|DCT|WWU|AGE|CNC2|FCE|
*/
/* CS0 configuration for 16 bit nor flash */
#define ACFG_CS0U_VAL 0x0000CC03
#define ACFG_CS0L_VAL 0xa0330D01
#define ACFG_CS0A_VAL 0x00220800
#define ACFG_CS1U_VAL 0x00000f00
#define ACFG_CS1L_VAL 0x00000D01
#define ACFG_CS1A_VAL 0
#define ACFG_CS2U_VAL 0
#define ACFG_CS2L_VAL 0
#define ACFG_CS2A_VAL 0
#define ACFG_CS3U_VAL 0
#define ACFG_CS3L_VAL 0
#define ACFG_CS3A_VAL 0
#define ACFG_CS4U_VAL 0
#define ACFG_CS4L_VAL 0
#define ACFG_CS4A_VAL 0
/* FPGA 16 bit data bus */
#define ACFG_CS5U_VAL 0x00000600
#define ACFG_CS5L_VAL 0x00000D01
#define ACFG_CS5A_VAL 0
#define ACFG_EIM_VAL 0x00002200
/*
* FPGA specific settings
*/
/* CLKO */
#define ACFG_CCSR_VAL 0x00000305
/* drive strength CLKO set to 2 */
#define ACFG_DSCR10_VAL 0x00020000
/* drive strength A1..A12 set to 2 */
#define ACFG_DSCR3_VAL 0x02AAAAA8
/* drive strength ctrl */
#define ACFG_DSCR7_VAL 0x00020880
/* drive strength data */
#define ACFG_DSCR2_VAL 0xAAAAAAAA
/*
* Default configuration for GPIOs and peripherals
*/
#define ACFG_DDIR_A_VAL 0x00000000
#define ACFG_OCR1_A_VAL 0x00000000
#define ACFG_OCR2_A_VAL 0x00000000
#define ACFG_ICFA1_A_VAL 0xFFFFFFFF
#define ACFG_ICFA2_A_VAL 0xFFFFFFFF
#define ACFG_ICFB1_A_VAL 0xFFFFFFFF
#define ACFG_ICFB2_A_VAL 0xFFFFFFFF
#define ACFG_DR_A_VAL 0x00000000
#define ACFG_GIUS_A_VAL 0xFFFFFFFF
#define ACFG_ICR1_A_VAL 0x00000000
#define ACFG_ICR2_A_VAL 0x00000000
#define ACFG_IMR_A_VAL 0x00000000
#define ACFG_GPR_A_VAL 0x00000000
#define ACFG_PUEN_A_VAL 0xFFFFFFFF
#define ACFG_DDIR_B_VAL 0x00000000
#define ACFG_OCR1_B_VAL 0x00000000
#define ACFG_OCR2_B_VAL 0x00000000
#define ACFG_ICFA1_B_VAL 0xFFFFFFFF
#define ACFG_ICFA2_B_VAL 0xFFFFFFFF
#define ACFG_ICFB1_B_VAL 0xFFFFFFFF
#define ACFG_ICFB2_B_VAL 0xFFFFFFFF
#define ACFG_DR_B_VAL 0x00000000
#define ACFG_GIUS_B_VAL 0xFF3FFFF0
#define ACFG_ICR1_B_VAL 0x00000000
#define ACFG_ICR2_B_VAL 0x00000000
#define ACFG_IMR_B_VAL 0x00000000
#define ACFG_GPR_B_VAL 0x00000000
#define ACFG_PUEN_B_VAL 0xFFFFFFFF
#define ACFG_DDIR_C_VAL 0x00000000
#define ACFG_OCR1_C_VAL 0x00000000
#define ACFG_OCR2_C_VAL 0x00000000
#define ACFG_ICFA1_C_VAL 0xFFFFFFFF
#define ACFG_ICFA2_C_VAL 0xFFFFFFFF
#define ACFG_ICFB1_C_VAL 0xFFFFFFFF
#define ACFG_ICFB2_C_VAL 0xFFFFFFFF
#define ACFG_DR_C_VAL 0x00000000
#define ACFG_GIUS_C_VAL 0xFFFFC07F
#define ACFG_ICR1_C_VAL 0x00000000
#define ACFG_ICR2_C_VAL 0x00000000
#define ACFG_IMR_C_VAL 0x00000000
#define ACFG_GPR_C_VAL 0x00000000
#define ACFG_PUEN_C_VAL 0xFFFFFF87
#define ACFG_DDIR_D_VAL 0x00000000
#define ACFG_OCR1_D_VAL 0x00000000
#define ACFG_OCR2_D_VAL 0x00000000
#define ACFG_ICFA1_D_VAL 0xFFFFFFFF
#define ACFG_ICFA2_D_VAL 0xFFFFFFFF
#define ACFG_ICFB1_D_VAL 0xFFFFFFFF
#define ACFG_ICFB2_D_VAL 0xFFFFFFFF
#define ACFG_DR_D_VAL 0x00000000
#define ACFG_GIUS_D_VAL 0xFFFFFFFF
#define ACFG_ICR1_D_VAL 0x00000000
#define ACFG_ICR2_D_VAL 0x00000000
#define ACFG_IMR_D_VAL 0x00000000
#define ACFG_GPR_D_VAL 0x00000000
#define ACFG_PUEN_D_VAL 0xFFFFFFFF
#define ACFG_DDIR_E_VAL 0x00000000
#define ACFG_OCR1_E_VAL 0x00000000
#define ACFG_OCR2_E_VAL 0x00000000
#define ACFG_ICFA1_E_VAL 0xFFFFFFFF
#define ACFG_ICFA2_E_VAL 0xFFFFFFFF
#define ACFG_ICFB1_E_VAL 0xFFFFFFFF
#define ACFG_ICFB2_E_VAL 0xFFFFFFFF
#define ACFG_DR_E_VAL 0x00000000
#define ACFG_GIUS_E_VAL 0xFCFFCCF8
#define ACFG_ICR1_E_VAL 0x00000000
#define ACFG_ICR2_E_VAL 0x00000000
#define ACFG_IMR_E_VAL 0x00000000
#define ACFG_GPR_E_VAL 0x00000000
#define ACFG_PUEN_E_VAL 0xFFFFFFFF
#define ACFG_DDIR_F_VAL 0x00000000
#define ACFG_OCR1_F_VAL 0x00000000
#define ACFG_OCR2_F_VAL 0x00000000
#define ACFG_ICFA1_F_VAL 0xFFFFFFFF
#define ACFG_ICFA2_F_VAL 0xFFFFFFFF
#define ACFG_ICFB1_F_VAL 0xFFFFFFFF
#define ACFG_ICFB2_F_VAL 0xFFFFFFFF
#define ACFG_DR_F_VAL 0x00000000
#define ACFG_GIUS_F_VAL 0xFF7F8000
#define ACFG_ICR1_F_VAL 0x00000000
#define ACFG_ICR2_F_VAL 0x00000000
#define ACFG_IMR_F_VAL 0x00000000
#define ACFG_GPR_F_VAL 0x00000000
#define ACFG_PUEN_F_VAL 0xFFFFFFFF
/* Enforce DDR signal strengh & enable USB/PP/DMA burst override bits */
#define ACFG_GPCR_VAL 0x0003000F
#define ACFG_ESDMISC_VAL ESDMISC_LHD+ESDMISC_MDDREN
/* FMCR select num LPDDR RAMs and nand 16bits, 2KB pages */
#if (CONFIG_NR_DRAM_BANKS == 1)
#define ACFG_FMCR_VAL 0xFFFFFFF9
#elif (CONFIG_NR_DRAM_BANKS == 2)
#define ACFG_FMCR_VAL 0xFFFFFFFB
#endif
#define ACFG_AIPI1_PSR0_VAL 0x20040304
#define ACFG_AIPI1_PSR1_VAL 0xDFFBFCFB
#define ACFG_AIPI2_PSR0_VAL 0x00000000
#define ACFG_AIPI2_PSR1_VAL 0xFFFFFFFF
/* PCCR enable DMA FEC I2C1 IIM SDHC1 */
#define ACFG_PCCR0_VAL 0x05070410
#define ACFG_PCCR1_VAL 0xA14A0608
/*
* From here, there should not be any user configuration.
* All Equations are automatic
*/
/* fixme none integer value (7.5ns) => 2*hclock = 15ns */
#define ACFG_2XHCLK_LGTH (2000/CONFIG_HCLK_FREQ) /* ns */
/* USB 60 MHz ; ARM up to 400; HClK up to 133MHz*/
#define CSCR_MASK 0x0300800D
#define ACFG_CSCR_VAL \
(CSCR_MASK \
|((((CONFIG_SPLL_FREQ/CONFIG_USB_FREQ)-1)&0x07) << 28) \
|((((CONFIG_MPLL_FREQ/CONFIG_ARM_FREQ)-1)&0x03) << 12) \
|((((ACFG_CLK_FREQ/CONFIG_HCLK_FREQ)-1)&0x03) << 8))
/* SSIx CLKO NFC H264 MSHC */
#define ACFG_PCDR0_VAL\
(((((ACFG_CLK_FREQ/CONFIG_MSHC_FREQ)-1)&0x3F)<<0) \
|((((CONFIG_HCLK_FREQ/CONFIG_NFC_FREQ)-1)&0x0F)<<6) \
|(((((ACFG_CLK_FREQ/CONFIG_H264_FREQ)-2)*2)&0x3F)<<10)\
|(((((ACFG_CLK_FREQ/CONFIG_SSI1_FREQ)-2)*2)&0x3F)<<16)\
|(((CONFIG_CLK0_DIV)&0x07)<<22)\
|(((CONFIG_CLK0_EN)&0x01)<<25)\
|(((((ACFG_CLK_FREQ/CONFIG_SSI2_FREQ)-2)*2)&0x3F)<<26))
/* PERCLKx */
#define ACFG_PCDR1_VAL\
(((((ACFG_CLK_FREQ/CONFIG_PERIF1_FREQ)-1)&0x3F)<<0) \
|((((ACFG_CLK_FREQ/CONFIG_PERIF2_FREQ)-1)&0x3F)<<8) \
|((((ACFG_CLK_FREQ/CONFIG_PERIF3_FREQ)-1)&0x3F)<<16) \
|((((ACFG_CLK_FREQ/CONFIG_PERIF4_FREQ)-1)&0x3F)<<24))
/* SDRAM controller programming Values */
#if (((2*ACFG_SDRAM_CLOCK_CYCLE_CL_1) > (3*ACFG_2XHCLK_LGTH)) || \
(ACFG_SDRAM_CLOCK_CYCLE_CL_1 < 1))
#define REG_FIELD_SCL_VAL 3
#define REG_FIELD_SCLIMX_VAL 0
#else
#define REG_FIELD_SCL_VAL\
((2*ACFG_SDRAM_CLOCK_CYCLE_CL_1+ACFG_2XHCLK_LGTH-1)/ \
ACFG_2XHCLK_LGTH)
#define REG_FIELD_SCLIMX_VAL REG_FIELD_SCL_VAL
#endif
#if ((2*ACFG_SDRAM_RC_DELAY) > (16*ACFG_2XHCLK_LGTH))
#define REG_FIELD_SRC_VAL 0
#else
#define REG_FIELD_SRC_VAL\
((2*ACFG_SDRAM_RC_DELAY+ACFG_2XHCLK_LGTH-1)/ \
ACFG_2XHCLK_LGTH)
#endif
/* TBD Power down timer ; PRCT Bit Field Encoding; burst length 8 ; FP = 0*/
#define REG_ESDCTL_BASE_CONFIG (0x80020485\
| (((ACFG_SDRAM_NUM_ROW-11)&0x7)<<24)\
| (((ACFG_SDRAM_NUM_COL-8)&0x3)<<20)\
| (((ACFG_SDRAM_REFRESH)&0x7)<<13))
#define ACFG_NORMAL_RW_CMD ((0x0<<28)+REG_ESDCTL_BASE_CONFIG)
#define ACFG_PRECHARGE_CMD ((0x1<<28)+REG_ESDCTL_BASE_CONFIG)
#define ACFG_AUTOREFRESH_CMD ((0x2<<28)+REG_ESDCTL_BASE_CONFIG)
#define ACFG_SET_MODE_REG_CMD ((0x3<<28)+REG_ESDCTL_BASE_CONFIG)
/* ESDRAMC Configuration Registers : force CL=3 to lpddr */
#define ACFG_SDRAM_ESDCFG_REGISTER_VAL (0x0\
| (((((2*ACFG_SDRAM_EXIT_PWD+ACFG_2XHCLK_LGTH-1)/ \
ACFG_2XHCLK_LGTH)-1)&0x3)<<21)\
| (((ACFG_SDRAM_W2R_DELAY-1)&0x1)<<20)\
| (((((2*ACFG_SDRAM_ROW_PRECHARGE_DELAY+ \
ACFG_2XHCLK_LGTH-1)/ACFG_2XHCLK_LGTH)-1)&0x3)<<18) \
| (((ACFG_SDRAM_TMRD_DELAY-1)&0x3)<<16)\
| (((ACFG_SDRAM_TWR_DELAY)&0x1)<<15)\
| (((((2*ACFG_SDRAM_RAS_DELAY+ACFG_2XHCLK_LGTH-1)/ \
ACFG_2XHCLK_LGTH)-1)&0x7)<<12) \
| (((((2*ACFG_SDRAM_RRD_DELAY+ACFG_2XHCLK_LGTH-1)/ \
ACFG_2XHCLK_LGTH)-1)&0x3)<<10) \
| (((REG_FIELD_SCLIMX_VAL)&0x3)<<8)\
| (((((2*ACFG_SDRAM_RCD_DELAY+ACFG_2XHCLK_LGTH-1)/ \
ACFG_2XHCLK_LGTH)-1)&0x7)<<4) \
| (((REG_FIELD_SRC_VAL)&0x0F)<<0))
/* Issue Mode register Command to SDRAM */
#define ACFG_SDRAM_MODE_REGISTER_VAL\
((((ACFG_SDRAM_BURST_LENGTH)&0x7)<<(0))\
| (((REG_FIELD_SCL_VAL)&0x7)<<(4))\
| ((0)<<(3)) /* sequentiql access */ \
/*| (((ACFG_SDRAM_SINGLE_ACCESS)&0x1)<<(1))*/)
/* Issue Extended Mode register Command to SDRAM */
#define ACFG_SDRAM_EXT_MODE_REGISTER_VAL\
((ACFG_SDRAM_PARTIAL_ARRAY_SR<<0)\
| (ACFG_SDRAM_DRIVE_STRENGH<<(5))\
| (1<<(ACFG_SDRAM_NUM_COL+ACFG_SDRAM_NUM_ROW+1+2)))
/* Issue Precharge all Command to SDRAM */
#define ACFG_SDRAM_PRECHARGE_ALL_VAL (1<<10)
#endif /* __APF27_H */