u-boot/board/freescale/common/qixis.h

112 lines
2.9 KiB
C
Raw Normal View History

/*
* Copyright 2011 Freescale Semiconductor
* Author: Shengzhou Liu <Shengzhou.Liu@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
*
* This file provides support for the QIXIS of some Freescale reference boards.
*/
#ifndef __QIXIS_H_
#define __QIXIS_H_
struct qixis {
u8 id; /* ID value uniquely identifying each QDS board type */
u8 arch; /* Board version information */
u8 scver; /* QIXIS Version Register */
u8 model; /* Information of software programming model version */
u8 tagdata;
u8 ctl_sys;
u8 aux; /* Auxiliary Register,0x06 */
u8 clk_spd;
u8 stat_dut;
u8 stat_sys;
u8 stat_alrm;
u8 present;
u8 present2; /* Presence Status Register 2,0x0c */
u8 rcw_ctl;
u8 ctl_led;
u8 i2cblk;
u8 rcfg_ctl; /* Reconfig Control Register,0x10 */
u8 rcfg_st;
u8 dcm_ad;
u8 dcm_da;
u8 dcmd;
u8 dmsg;
u8 gdc;
u8 gdd; /* DCM Debug Data Register,0x17 */
u8 dmack;
u8 res1[6];
u8 watch; /* Watchdog Register,0x1F */
u8 pwr_ctl[2]; /* Power Control Register,0x20 */
u8 res2[2];
u8 pwr_stat[4]; /* Power Status Register,0x24 */
u8 res3[8];
u8 clk_spd2[2]; /* SYSCLK clock Speed Register,0x30 */
u8 res4[2];
u8 sclk[3]; /* Clock Configuration Registers,0x34 */
u8 res5;
u8 dclk[3];
u8 res6;
u8 clk_dspd[3];
u8 res7;
u8 rst_ctl; /* Reset Control Register,0x40 */
u8 rst_stat; /* Reset Status Register */
u8 rst_rsn; /* Reset Reason Register */
u8 rst_frc[2]; /* Reset Force Registers,0x43 */
u8 res8[11];
u8 brdcfg[16]; /* Board Configuration Register,0x50 */
u8 dutcfg[16];
u8 rcw_ad[2]; /* RCW SRAM Address Registers,0x70 */
u8 rcw_data;
u8 res9[5];
u8 post_ctl;
u8 post_stat;
u8 post_dat[2];
u8 pi_d[4];
u8 gpio_io[4];
u8 gpio_dir[4];
u8 res10[20];
u8 rjtag_ctl;
u8 rjtag_dat;
u8 res11[2];
u8 trig_src[4];
u8 trig_dst[4];
u8 trig_stat;
u8 res12[3];
u8 trig_ctr[4];
u8 res13[16];
u8 clk_freq[6]; /* Clock Measurement Registers */
u8 res_c6[8];
u8 clk_base[2]; /* Clock Frequency Base Reg */
powerpc/t1040qds: Add T1040QDS board T1040QDS is a high-performance computing evaluation, development and test platform supporting the T1040 QorIQ Power Architecture™ processor. T1040QDS board Overview ----------------------- - Four e5500 cores, each with a private 256 KB L2 cache - 256 KB shared L3 CoreNet platform cache (CPC) - Interconnect CoreNet platform - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: - Packet parsing, classification, and distribution - Queue management for scheduling, packet sequencing, and congestion management - Cryptography Acceleration - RegEx Pattern Matching Acceleration - IEEE Std 1588 support - Hardware buffer management for buffer allocation and deallocation - Ethernet interfaces - Integrated 8-port Gigabit Ethernet switch - Four 1 Gbps Ethernet controllers - SERDES Connections, 8 lanes supporting: — PCI Express: supporting Gen 1 and Gen 2; — SGMII — QSGMII — SATA 2.0 — Aurora debug with dedicated connectors - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and Interleaving -IFC/Local Bus - NAND flash: 8-bit, async, up to 2GB. - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB - GASIC: Simple (minimal) target within Qixis FPGA - PromJET rapid memory download support - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - QIXIS System Logic FPGA - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Power Supplies - Video - DIU supports video at up to 1280x1024x32bpp - USB - Supports two USB 2.0 ports with integrated PHYs — Two type A ports with 5V@1.5A per port. — Second port can be converted to OTG mini-AB - SDHC - SDHC port connects directly to an adapter card slot, featuring: - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC — Supporting eMMC memory devices - SPI - On-board support of 3 different devices and sizes - Other IO - Two Serial ports - ProfiBus port - Four I2C ports Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: fix conflict in boards.cfg] Acked-by-by: York Sun <yorksun@freescale.com>
2013-09-12 05:41:28 +00:00
u8 res_d0[8];
u8 cms[2]; /* Core Management Space Address Register, 0xD8 */
u8 res_c0[6];
u8 aux2[4]; /* Auxiliary Registers,0xE0 */
u8 res14[10];
u8 aux_ad;
u8 aux_da;
u8 res15[16];
};
u8 qixis_read(unsigned int reg);
void qixis_write(unsigned int reg, u8 value);
u16 qixis_read_minor(void);
char *qixis_read_time(char *result);
char *qixis_read_tag(char *buf);
const char *byte_to_binary_mask(u8 val, u8 mask, char *buf);
#ifdef CONFIG_SYS_I2C_FPGA_ADDR
u8 qixis_read_i2c(unsigned int reg);
void qixis_write_i2c(unsigned int reg, u8 value);
#endif
#define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
#define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
#ifdef CONFIG_SYS_I2C_FPGA_ADDR
#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
#define QIXIS_WRITE_I2C(reg, value) \
qixis_write_i2c(offsetof(struct qixis, reg), value)
#endif
#endif