u-boot/drivers/fpga/socfpga.c

305 lines
7.7 KiB
C
Raw Normal View History

/*
* Copyright (C) 2012 Altera Corporation <www.altera.com>
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <common.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/fpga_manager.h>
#include <asm/arch/reset_manager.h>
#include <asm/arch/system_manager.h>
DECLARE_GLOBAL_DATA_PTR;
/* Timeout count */
#define FPGA_TIMEOUT_CNT 0x1000000
static struct socfpga_fpga_manager *fpgamgr_regs =
(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
static struct socfpga_system_manager *sysmgr_regs =
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
/* Set CD ratio */
static void fpgamgr_set_cd_ratio(unsigned long ratio)
{
clrsetbits_le32(&fpgamgr_regs->ctrl,
0x3 << FPGAMGRREGS_CTRL_CDRATIO_LSB,
(ratio & 0x3) << FPGAMGRREGS_CTRL_CDRATIO_LSB);
}
static int fpgamgr_dclkcnt_set(unsigned long cnt)
{
unsigned long i;
/* Clear any existing done status */
if (readl(&fpgamgr_regs->dclkstat))
writel(0x1, &fpgamgr_regs->dclkstat);
/* Write the dclkcnt */
writel(cnt, &fpgamgr_regs->dclkcnt);
/* Wait till the dclkcnt done */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
if (!readl(&fpgamgr_regs->dclkstat))
continue;
writel(0x1, &fpgamgr_regs->dclkstat);
return 0;
}
return -ETIMEDOUT;
}
/* Start the FPGA programming by initialize the FPGA Manager */
static int fpgamgr_program_init(void)
{
unsigned long msel, i;
/* Get the MSEL value */
msel = readl(&fpgamgr_regs->stat);
msel &= FPGAMGRREGS_STAT_MSEL_MASK;
msel >>= FPGAMGRREGS_STAT_MSEL_LSB;
/*
* Set the cfg width
* If MSEL[3] = 1, cfg width = 32 bit
*/
if (msel & 0x8) {
setbits_le32(&fpgamgr_regs->ctrl,
FPGAMGRREGS_CTRL_CFGWDTH_MASK);
/* To determine the CD ratio */
/* MSEL[1:0] = 0, CD Ratio = 1 */
if ((msel & 0x3) == 0x0)
fpgamgr_set_cd_ratio(CDRATIO_x1);
/* MSEL[1:0] = 1, CD Ratio = 4 */
else if ((msel & 0x3) == 0x1)
fpgamgr_set_cd_ratio(CDRATIO_x4);
/* MSEL[1:0] = 2, CD Ratio = 8 */
else if ((msel & 0x3) == 0x2)
fpgamgr_set_cd_ratio(CDRATIO_x8);
} else { /* MSEL[3] = 0 */
clrbits_le32(&fpgamgr_regs->ctrl,
FPGAMGRREGS_CTRL_CFGWDTH_MASK);
/* To determine the CD ratio */
/* MSEL[1:0] = 0, CD Ratio = 1 */
if ((msel & 0x3) == 0x0)
fpgamgr_set_cd_ratio(CDRATIO_x1);
/* MSEL[1:0] = 1, CD Ratio = 2 */
else if ((msel & 0x3) == 0x1)
fpgamgr_set_cd_ratio(CDRATIO_x2);
/* MSEL[1:0] = 2, CD Ratio = 4 */
else if ((msel & 0x3) == 0x2)
fpgamgr_set_cd_ratio(CDRATIO_x4);
}
/* To enable FPGA Manager configuration */
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCE_MASK);
/* To enable FPGA Manager drive over configuration line */
setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK);
/* Put FPGA into reset phase */
setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
/* (1) wait until FPGA enter reset phase */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_RESETPHASE)
break;
}
/* If not in reset state, return error */
if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_RESETPHASE) {
puts("FPGA: Could not reset\n");
return -1;
}
/* Release FPGA from reset phase */
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
/* (2) wait until FPGA enter configuration phase */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_CFGPHASE)
break;
}
/* If not in configuration state, return error */
if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_CFGPHASE) {
puts("FPGA: Could not configure\n");
return -2;
}
/* Clear all interrupts in CB Monitor */
writel(0xFFF, &fpgamgr_regs->gpio_porta_eoi);
/* Enable AXI configuration */
setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK);
return 0;
}
/* Write the RBF data to FPGA Manager */
static void fpgamgr_program_write(const void *rbf_data, unsigned long rbf_size)
{
uint32_t src = (uint32_t)rbf_data;
uint32_t dst = SOCFPGA_FPGAMGRDATA_ADDRESS;
/* Number of loops for 32-byte long copying. */
uint32_t loops32 = rbf_size / 32;
/* Number of loops for 4-byte long copying + trailing bytes */
uint32_t loops4 = DIV_ROUND_UP(rbf_size % 32, 4);
asm volatile(
"1: ldmia %0!, {r0-r7}\n"
" stmia %1!, {r0-r7}\n"
" sub %1, #32\n"
" subs %2, #1\n"
" bne 1b\n"
" cmp %3, #0\n"
" beq 3f\n"
"2: ldr %2, [%0], #4\n"
" str %2, [%1]\n"
" subs %3, #1\n"
" bne 2b\n"
"3: nop\n"
: "+r"(src), "+r"(dst), "+r"(loops32), "+r"(loops4) :
: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "cc");
}
/* Ensure the FPGA entering config done */
static int fpgamgr_program_poll_cd(void)
{
const uint32_t mask = FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK |
FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK;
unsigned long reg, i;
/* (3) wait until full config done */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
reg = readl(&fpgamgr_regs->gpio_ext_porta);
/* Config error */
if (!(reg & mask)) {
printf("FPGA: Configuration error.\n");
return -3;
}
/* Config done without error */
if (reg & mask)
break;
}
/* Timeout happened, return error */
if (i == FPGA_TIMEOUT_CNT) {
printf("FPGA: Timeout waiting for program.\n");
return -4;
}
/* Disable AXI configuration */
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK);
return 0;
}
/* Ensure the FPGA entering init phase */
static int fpgamgr_program_poll_initphase(void)
{
unsigned long i;
/* Additional clocks for the CB to enter initialization phase */
if (fpgamgr_dclkcnt_set(0x4))
return -5;
/* (4) wait until FPGA enter init phase or user mode */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_INITPHASE)
break;
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE)
break;
}
/* If not in configuration state, return error */
if (i == FPGA_TIMEOUT_CNT)
return -6;
return 0;
}
/* Ensure the FPGA entering user mode */
static int fpgamgr_program_poll_usermode(void)
{
unsigned long i;
/* Additional clocks for the CB to exit initialization phase */
if (fpgamgr_dclkcnt_set(0x5000))
return -7;
/* (5) wait until FPGA enter user mode */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE)
break;
}
/* If not in configuration state, return error */
if (i == FPGA_TIMEOUT_CNT)
return -8;
/* To release FPGA Manager drive over configuration line */
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK);
return 0;
}
/*
* FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
* Return 0 for sucess, non-zero for error.
*/
int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
{
unsigned long status;
if ((uint32_t)rbf_data & 0x3) {
puts("FPGA: Unaligned data, realign to 32bit boundary.\n");
return -EINVAL;
}
/* Prior programming the FPGA, all bridges need to be shut off */
/* Disable all signals from hps peripheral controller to fpga */
writel(0, &sysmgr_regs->fpgaintfgrp_module);
/* Disable all signals from FPGA to HPS SDRAM */
#define SDR_CTRLGRP_FPGAPORTRST_ADDRESS 0x5080
writel(0, SOCFPGA_SDR_ADDRESS + SDR_CTRLGRP_FPGAPORTRST_ADDRESS);
/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
socfpga_bridges_reset(1);
/* Unmap the bridges from NIC-301 */
writel(0x1, SOCFPGA_L3REGS_ADDRESS);
/* Initialize the FPGA Manager */
status = fpgamgr_program_init();
if (status)
return status;
/* Write the RBF data to FPGA Manager */
fpgamgr_program_write(rbf_data, rbf_size);
/* Ensure the FPGA entering config done */
status = fpgamgr_program_poll_cd();
if (status)
return status;
/* Ensure the FPGA entering init phase */
status = fpgamgr_program_poll_initphase();
if (status)
return status;
/* Ensure the FPGA entering user mode */
return fpgamgr_program_poll_usermode();
}