u-boot/include/configs/EB+MCF-EV123.h

280 lines
9 KiB
C
Raw Normal View History

/*
* Configuation settings for the BuS EB+MCF-EV123 boards.
*
* (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _CONFIG_EB_MCF_EV123_H_
#define _CONFIG_EB_MCF_EV123_H_
#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP
2006-06-10 20:00:40 +00:00
/*----------------------------------------------------------------------*
* High Level Configuration Options (easy to change) *
*----------------------------------------------------------------------*/
#define CONFIG_MCF52x2 /* define processor family */
#define CONFIG_M5282 /* define processor type */
#define CONFIG_EB_MCF_EV123
#define CONFIG_MISC_INIT_R
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 9600
#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
#define CONFIG_BOOTCOMMAND "printenv"
/*----------------------------------------------------------------------*
* Options *
*----------------------------------------------------------------------*/
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
#define CONFIG_SPLASH_SCREEN
/*----------------------------------------------------------------------*
* Configuration for environment *
* Environment is in the second sector of the first 256k of flash *
*----------------------------------------------------------------------*/
#ifndef CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_ENV_ADDR 0xF003C000 /* End of 256K */
#define CONFIG_ENV_SECT_SIZE 0x4000
#define CONFIG_ENV_IS_IN_FLASH 1
#else
#define CONFIG_ENV_ADDR 0xFFE04000
#define CONFIG_ENV_SECT_SIZE 0x2000
#define CONFIG_ENV_IS_IN_FLASH 1
#endif
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_LOADB
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_MCFTMR
#define CONFIG_BOOTDELAY 5
#define CONFIG_HUSH_PARSER
#define CONFIG_SYS_PROMPT "\nEV123 U-Boot> "
#define CONFIG_SYS_LONGHELP 1
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR 0x20000
#define CONFIG_SYS_MEMTEST_START 0x100000
#define CONFIG_SYS_MEMTEST_END 0x400000
/*#define CONFIG_SYS_DRAM_TEST 1 */
#undef CONFIG_SYS_DRAM_TEST
/*----------------------------------------------------------------------*
* Clock and PLL Configuration *
*----------------------------------------------------------------------*/
#define CONFIG_SYS_HZ 10000000
#define CONFIG_SYS_CLK 58982400 /* 9,8304MHz * 6 */
/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */
#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
/*----------------------------------------------------------------------*
* Network *
*----------------------------------------------------------------------*/
#define CONFIG_MCFFEC
#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1
#define CONFIG_MII_INIT 1
#define CONFIG_SYS_DISCOVER_PHY
#define CONFIG_SYS_RX_ETH_BUFFER 8
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#define CONFIG_SYS_FEC0_PINMUX 0
#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
#define MCFFEC_TOUT_LOOP 50000
#define CONFIG_ETHADDR 00:CF:52:82:EB:01
#define CONFIG_OVERWRITE_ETHADDR_ONCE
/*-------------------------------------------------------------------------
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*-----------------------------------------------------------------------*/
#define CONFIG_SYS_MBAR 0x40000000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*-----------------------------------------------------------------------*/
#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
#define CONFIG_SYS_INIT_RAM_END 0x10000
#define CONFIG_SYS_GBL_DATA_SIZE 64
#define CONFIG_SYS_GBL_DATA_OFFSET \
(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
#define CONFIG_SYS_SDRAM_BASE1 0x00000000
#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE1
#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE1
/* If M5282 port is fully implemented the monitor base will be behind
* the vector table. */
#if (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
#else
#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
#endif
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_MALLOC_LEN (256 << 10)
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
#define CONFIG_SYS_MAX_FLASH_SECT 35
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000
#define CONFIG_SYS_FLASH_PROTECTION
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CONFIG_SYS_CACHELINE_SIZE 16
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
#define CONFIG_SYS_CS0_BASE 0xFFE00000
#define CONFIG_SYS_CS0_CTRL 0x00001980
#define CONFIG_SYS_CS0_MASK 0x001F0001
#define CONFIG_SYS_CS3_BASE 0xE0000000
#define CONFIG_SYS_CS0_CTRL 0x00001980
#define CONFIG_SYS_CS3_MASK 0x000F0001
/*-----------------------------------------------------------------------
* Port configuration
*/
#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */
#define CONFIG_SYS_PADDR 0x0000000
#define CONFIG_SYS_PADAT 0x0000000
#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */
#define CONFIG_SYS_PBDDR 0x0000000
#define CONFIG_SYS_PBDAT 0x0000000
#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */
#define CONFIG_SYS_PCDDR 0x0000000
#define CONFIG_SYS_PCDAT 0x0000000
#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */
#define CONFIG_SYS_PCDDR 0x0000000
#define CONFIG_SYS_PCDAT 0x0000000
#define CONFIG_SYS_PEHLPAR 0xC0
#define CONFIG_SYS_PUAPAR 0x0F
#define CONFIG_SYS_DDRUA 0x05
#define CONFIG_SYS_PJPAR 0xFF
/*-----------------------------------------------------------------------
* VIDEO configuration
*/
#define CONFIG_VIDEO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_VCXK 1
#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2
#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1
#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS3_BASE
#define CONFIG_SYS_VCXK_AUTODETECT 1
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001
#define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT
#define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR
#define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002
#define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT
#define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR
#define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004
#define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE
#define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE
#define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2
#endif /* CONFIG_VIDEO */
#endif /* _CONFIG_M5282EVB_H */
/*---------------------------------------------------------------------*/