u-boot/cmd/zfs.c

172 lines
3.6 KiB
C
Raw Normal View History

/*
*
* ZFS filesystem porting to Uboot by
* Jorgen Lundman <lundman at lundman.net>
*
* zfsfs support
* made from existing GRUB Sources by Sun, GNU and others.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <part.h>
#include <config.h>
#include <command.h>
#include <image.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <zfs_common.h>
#include <linux/stat.h>
#include <malloc.h>
#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
#include <usb.h>
#endif
#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
#error DOS or EFI partition support must be selected
#endif
#define DOS_PART_MAGIC_OFFSET 0x1fe
#define DOS_FS_TYPE_OFFSET 0x36
#define DOS_FS32_TYPE_OFFSET 0x52
static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *filename = NULL;
int dev;
int part;
ulong addr = 0;
disk_partition_t info;
block_dev_desc_t *dev_desc;
char buf[12];
unsigned long count;
const char *addr_str;
struct zfs_file zfile;
struct device_s vdev;
if (argc < 3)
return CMD_RET_USAGE;
count = 0;
addr = simple_strtoul(argv[3], NULL, 16);
filename = getenv("bootfile");
switch (argc) {
case 3:
addr_str = getenv("loadaddr");
if (addr_str != NULL)
addr = simple_strtoul(addr_str, NULL, 16);
else
addr = CONFIG_SYS_LOAD_ADDR;
break;
case 4:
break;
case 5:
filename = argv[4];
break;
case 6:
filename = argv[4];
count = simple_strtoul(argv[5], NULL, 16);
break;
default:
return cmd_usage(cmdtp);
}
if (!filename) {
puts("** No boot file defined **\n");
return 1;
}
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
if (part < 0)
return 1;
dev = dev_desc->dev;
printf("Loading file \"%s\" from %s device %d%c%c\n",
filename, argv[1], dev,
part ? ':' : ' ', part ? part + '0' : ' ');
zfs_set_blk_dev(dev_desc, &info);
vdev.part_length = info.size;
memset(&zfile, 0, sizeof(zfile));
zfile.device = &vdev;
if (zfs_open(&zfile, filename)) {
printf("** File not found %s **\n", filename);
return 1;
}
if ((count < zfile.size) && (count != 0))
zfile.size = (uint64_t)count;
if (zfs_read(&zfile, (char *)addr, zfile.size) != zfile.size) {
printf("** Unable to read \"%s\" from %s %d:%d **\n",
filename, argv[1], dev, part);
zfs_close(&zfile);
return 1;
}
zfs_close(&zfile);
/* Loading ok, update default load address */
load_addr = addr;
printf("%llu bytes read\n", zfile.size);
setenv_hex("filesize", zfile.size);
return 0;
}
int zfs_print(const char *entry, const struct zfs_dirhook_info *data)
{
printf("%s %s\n",
data->dir ? "<DIR> " : " ",
entry);
return 0; /* 0 continue, 1 stop */
}
static int do_zfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
const char *filename = "/";
int part;
block_dev_desc_t *dev_desc;
disk_partition_t info;
struct device_s vdev;
if (argc < 2)
return cmd_usage(cmdtp);
if (argc == 4)
filename = argv[3];
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
if (part < 0)
return 1;
zfs_set_blk_dev(dev_desc, &info);
vdev.part_length = info.size;
zfs_ls(&vdev, filename,
zfs_print);
return 0;
}
U_BOOT_CMD(zfsls, 4, 1, do_zfs_ls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
" - list files from 'dev' on 'interface' in a '/DATASET/@/$dir/'");
U_BOOT_CMD(zfsload, 6, 0, do_zfs_load,
"load binary file from a ZFS filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file '/DATASET/@/$dir/$file' from 'dev' on 'interface'\n"
" to address 'addr' from ZFS filesystem");