u-boot/drivers/dma/lpc32xx_dma.c

148 lines
3.5 KiB
C
Raw Normal View History

/*
* Copyright (C) 2008 by NXP Semiconductors
* @Author: Kevin Wells
* @Descr: LPC3250 DMA controller interface support functions
*
* Copyright (c) 2015 Tyco Fire Protection Products.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <asm/arch/dma.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clk.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
/* DMA controller channel register structure */
struct dmac_chan_reg {
u32 src_addr;
u32 dest_addr;
u32 lli;
u32 control;
u32 config_ch;
u32 reserved[3];
};
/* DMA controller register structures */
struct dma_reg {
u32 int_stat;
u32 int_tc_stat;
u32 int_tc_clear;
u32 int_err_stat;
u32 int_err_clear;
u32 raw_tc_stat;
u32 raw_err_stat;
u32 chan_enable;
u32 sw_burst_req;
u32 sw_single_req;
u32 sw_last_burst_req;
u32 sw_last_single_req;
u32 config;
u32 sync;
u32 reserved[50];
struct dmac_chan_reg dma_chan[8];
};
#define DMA_NO_OF_CHANNELS 8
/* config register definitions */
#define DMAC_CTRL_ENABLE (1 << 0) /* For enabling the DMA controller */
static u32 alloc_ch;
static struct dma_reg *dma = (struct dma_reg *)DMA_BASE;
int lpc32xx_dma_get_channel(void)
{
int i;
if (!alloc_ch) { /* First time caller */
/*
* DMA clock are enable by "lpc32xx_dma_init()" and should
* be call by board "board_early_init_f()" function.
*/
/*
* Make sure DMA controller and all channels are disabled.
* Controller is in little-endian mode. Disable sync signals.
*/
writel(0, &dma->config);
writel(0, &dma->sync);
/* Clear interrupt and error statuses */
writel(0xFF, &dma->int_tc_clear);
writel(0xFF, &dma->raw_tc_stat);
writel(0xFF, &dma->int_err_clear);
writel(0xFF, &dma->raw_err_stat);
/* Enable DMA controller */
writel(DMAC_CTRL_ENABLE, &dma->config);
}
i = ffz(alloc_ch);
/* Check if all the available channels are busy */
if (unlikely(i == DMA_NO_OF_CHANNELS))
return -1;
alloc_ch |= BIT_MASK(i);
return i;
}
int lpc32xx_dma_start_xfer(unsigned int channel,
const struct lpc32xx_dmac_ll *desc, u32 config)
{
if (unlikely(((BIT_MASK(channel) & alloc_ch) == 0) ||
(channel >= DMA_NO_OF_CHANNELS))) {
error("Request for xfer on unallocated channel %d", channel);
return -1;
}
writel(BIT_MASK(channel), &dma->int_tc_clear);
writel(BIT_MASK(channel), &dma->int_err_clear);
writel(desc->dma_src, &dma->dma_chan[channel].src_addr);
writel(desc->dma_dest, &dma->dma_chan[channel].dest_addr);
writel(desc->next_lli, &dma->dma_chan[channel].lli);
writel(desc->next_ctrl, &dma->dma_chan[channel].control);
writel(config, &dma->dma_chan[channel].config_ch);
return 0;
}
int lpc32xx_dma_wait_status(unsigned int channel)
{
unsigned long start;
u32 reg;
/* Check if given channel is valid */
if (unlikely(channel >= DMA_NO_OF_CHANNELS)) {
error("Request for status on unallocated channel %d", channel);
return -1;
}
start = get_timer(0);
while (1) {
reg = readl(&dma->raw_tc_stat);
reg |= readl(dma->raw_err_stat);
if (reg & BIT_MASK(channel))
break;
if (get_timer(start) > CONFIG_SYS_HZ) {
error("DMA status timeout channel %d\n", channel);
return -ETIMEDOUT;
}
udelay(1);
}
if (unlikely(readl(&dma->raw_err_stat) & BIT_MASK(channel))) {
setbits_le32(&dma->int_err_clear, BIT_MASK(channel));
setbits_le32(&dma->raw_err_stat, BIT_MASK(channel));
error("DMA error on channel %d\n", channel);
return -1;
}
setbits_le32(&dma->int_tc_clear, BIT_MASK(channel));
setbits_le32(&dma->raw_tc_stat, BIT_MASK(channel));
return 0;
}