u-boot/doc/README.spear

49 lines
1.3 KiB
Plaintext
Raw Normal View History

SPEAr (Structured Processor Enhanced Architecture).
SPEAr600 is also known as SPEArPlus and SPEAr300 is also known as SPEArBasic
The SPEAr SoC family embeds a customizable logic that can be programmed
one-time by a customer at silicon mask level (i.e. not at runtime!).
We are now adding the support in u-boot for two SoC: SPEAr600 and SPEAr3xx.
All 4 SoCs share common peripherals.
1. ARM926ejs core based (sp600 has two cores, the 2nd handled only in Linux)
2. FastEthernet (sp600 has Gbit version, but same controller - GMAC)
3. USB Host
4. USB Device
5. NAND controller (FSMC)
6. Serial NOR ctrl
7. I2C
8. SPI
9. CLCD
10. others ..
Everything is supported in Linux.
u-boot is not currently supporting all peripeharls (just a few as listed below).
1. USB Device
2. NAND controller (FSMC)
3. Serial Memory Interface
4. EMI (Parallel NOR interface)
4. I2C
5. UART
Build options
make spear600_config
make spear300_config
make spear310_config
make spear320_config
Further options
make ENV=NAND (supported by all 4 SoCs)
- This option generates a uboot image that saves environment inn NAND
make CONSOLE=USB (supported by all 4 SoCs)
- This option generates a uboot image for using usbdevice as a tty i/f
make FLASH=PNOR (supported by SPEAr310 and SPEAr320)
- This option generates a uboot image that supports emi controller for
CFI compliant parallel NOR flash