u-boot/include/configs/EVB64260.h

407 lines
13 KiB
C
Raw Normal View History

2002-11-03 00:24:07 +00:00
/*
* (C) Copyright 2001
* Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
2002-11-03 00:24:07 +00:00
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#ifndef __ASSEMBLY__
#include <galileo/core.h>
#endif
#include "../board/evb64260/local.h"
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_EVB64260 1 /* this is an EVB64260 board */
#define CONFIG_SYS_GT_6426x GT_64260 /* with a 64260 system controller */
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_TEXT_BASE 0xfff00000
#define CONFIG_SYS_LDSCRIPT "board/evb64260/u-boot.lds"
#define CONFIG_BAUDRATE 38400 /* console baudrate = 38400 */
2002-11-03 00:24:07 +00:00
#undef CONFIG_ECC /* enable ECC support */
/* #define CONFIG_EVB64260_750CX 1 */ /* Support the EVB-64260-750CX Board */
/* which initialization functions to call for this board */
#define CONFIG_MISC_INIT_R 1
#define CONFIG_BOARD_EARLY_INIT_F 1
2002-11-03 00:24:07 +00:00
#ifndef CONFIG_EVB64260_750CX
#define CONFIG_SYS_BOARD_NAME "EVB64260"
2002-11-03 00:24:07 +00:00
#else
#define CONFIG_SYS_BOARD_NAME "EVB64260-750CX"
2002-11-03 00:24:07 +00:00
#endif
#define CONFIG_SYS_HUSH_PARSER
2002-11-03 00:24:07 +00:00
/*
* The following defines let you select what serial you want to use
* for your console driver.
*
* what to do:
* to use the DUART, undef CONFIG_MPSC. If you have hacked a serial
* cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
2002-11-03 00:24:07 +00:00
* to 0 below.
*
* to use the MPSC, #define CONFIG_MPSC. If you have wired up another
* mpsc channel, change CONFIG_MPSC_PORT to the desired value.
*/
#define CONFIG_MPSC
#define CONFIG_MPSC_PORT 0
/* define this if you want to enable GT MAC filtering */
#define CONFIG_GT_USE_MAC_HASH_TABLE
#undef CONFIG_ETHER_PORT_MII /* use RMII */
#if 1
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_ZERO_BOOTDELAY_CHECK
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"bootp && " \
2002-11-03 00:24:07 +00:00
"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
"ip=$ipaddr:$serverip:$gatewayip:" \
"$netmask:$hostname:eth0:none; && " \
"bootm"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */
2002-11-03 00:24:07 +00:00
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_ALTIVEC /* undef to disable */
/*
* BOOTP options
*/
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
2002-11-03 00:24:07 +00:00
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
2002-11-03 00:24:07 +00:00
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
2002-11-03 00:24:07 +00:00
#else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
2002-11-03 00:24:07 +00:00
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */
#define CONFIG_SYS_BUS_CLK 100000000 /* 100 MHz */
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
2002-11-03 00:24:07 +00:00
#ifdef CONFIG_EVB64260_750CX
#define CONFIG_750CX
#define CONFIG_SYS_BROKEN_CL2
2002-11-03 00:24:07 +00:00
#endif
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area
*/
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_RAM_LOCK
2002-11-03 00:24:07 +00:00
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
2002-11-03 00:24:07 +00:00
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xfff00000
#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
2002-11-03 00:24:07 +00:00
/* areas to map different things with the GT in physical space */
#define CONFIG_SYS_DRAM_BANKS 4
#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */
2002-11-03 00:24:07 +00:00
/* What to put in the bats. */
#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
2002-11-03 00:24:07 +00:00
/* Peripheral Device section */
#define CONFIG_SYS_GT_REGS 0xf8000000
#define CONFIG_SYS_DEV_BASE 0xfc000000
#define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE
#define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)
#define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)
#define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)
#define CONFIG_SYS_DEV0_SIZE _8M /* evb64260 sram @ 0xfc00.0000 */
#define CONFIG_SYS_DEV1_SIZE _8M /* evb64260 rtc @ 0xfc80.0000 */
#define CONFIG_SYS_DEV2_SIZE _16M /* evb64260 duart @ 0xfd00.0000 */
#define CONFIG_SYS_DEV3_SIZE _16M /* evb64260 flash @ 0xfe00.0000 */
#define CONFIG_SYS_DEV0_PAR 0x20205093
#define CONFIG_SYS_DEV1_PAR 0xcfcfffff
#define CONFIG_SYS_DEV2_PAR 0xc0059bd4
#define CONFIG_SYS_8BIT_BOOT_PAR 0xc00b5e7c
#define CONFIG_SYS_32BIT_BOOT_PAR 0xc4a8241c
/* c 4 a 8 2 4 1 c */
/* 33 22|2222|22 22|111 1|11 11|1 1 | | */
/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */
/* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */
/* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */
2002-11-03 00:24:07 +00:00
#if 0 /* Wrong?? NTL */
#define CONFIG_SYS_MPP_CONTROL_0 0x53541717 /* InitAct EOT[4] DBurst TCEn[1] */
2002-11-03 00:24:07 +00:00
/* DMAAck[1:0] GNT0[1:0] */
#else
#define CONFIG_SYS_MPP_CONTROL_0 0x53547777 /* InitAct EOT[4] DBurst TCEn[1] */
2002-11-03 00:24:07 +00:00
/* REQ0[1:0] GNT0[1:0] */
#endif
#define CONFIG_SYS_MPP_CONTROL_1 0x44009911 /* TCEn[4] TCTcnt[4] GPP[13:12] */
2002-11-03 00:24:07 +00:00
/* DMAReq[4] DMAAck[4] WDNMI WDE */
#if 0 /* Wrong?? NTL */
#define CONFIG_SYS_MPP_CONTROL_2 0x40091818 /* TCTcnt[0] GPP[22:21] BClkIn */
2002-11-03 00:24:07 +00:00
/* DMAAck[1:0] GNT1[1:0] */
#else
#define CONFIG_SYS_MPP_CONTROL_2 0x40098888 /* TCTcnt[0] */
2002-11-03 00:24:07 +00:00
/* GPP[22] (RS232IntB or PCI1Int) */
/* GPP[21] (RS323IntA) */
/* BClkIn */
/* REQ1[1:0] GNT1[1:0] */
#endif
#if 0 /* Wrong?? NTL */
# define CONFIG_SYS_MPP_CONTROL_3 0x00090066 /* GPP[31:29] BClkOut0 */
2002-11-03 00:24:07 +00:00
/* GPP[27:26] Int[1:0] */
#else
# define CONFIG_SYS_MPP_CONTROL_3 0x22090066 /* MREQ MGNT */
/* GPP[29] (PCI1Int) */
/* BClkOut0 */
/* GPP[27] (PCI0Int) */
/* GPP[26] (RtcInt or PCI1Int) */
/* CPUInt[25:24] */
2002-11-03 00:24:07 +00:00
#endif
# define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102 /* 0=hiZ 1=MPSC0 2=ETH 0 and 2 RMII */
2002-11-03 00:24:07 +00:00
#if 0 /* Wrong?? - NTL */
# define CONFIG_SYS_GPP_LEVEL_CONTROL 0x000002c6
2002-11-03 00:24:07 +00:00
#else
# define CONFIG_SYS_GPP_LEVEL_CONTROL 0x2c600000 /* 0010 1100 0110 0000 */
/* gpp[29] */
2002-11-03 00:24:07 +00:00
/* gpp[27:26] */
/* gpp[22:21] */
2002-11-03 00:24:07 +00:00
# define CONFIG_SYS_SDRAM_CONFIG 0xd8e18200 /* 0x448 */
2002-11-03 00:24:07 +00:00
/* idmas use buffer 1,1
comm use buffer 0
pci use buffer 1,1
cpu use buffer 0
normal load (see also ifdef HVL)
standard SDRAM (see also ifdef REG)
non staggered refresh */
/* 31:26 25 23 20 19 18 16 */
/* 110110 00 111 0 0 00 1 */
/* refresh_count=0x200
phisical interleaving disable
virtual interleaving enable */
/* 15 14 13:0 */
/* 1 0 0x200 */
#endif
#define CONFIG_SYS_DUART_IO CONFIG_SYS_DEV2_SPACE
#define CONFIG_SYS_DUART_CHAN 1 /* channel to use for console */
#define CONFIG_SYS_INIT_CHAN1
#define CONFIG_SYS_INIT_CHAN2
2002-11-03 00:24:07 +00:00
#define SRAM_BASE CONFIG_SYS_DEV0_SPACE
2002-11-03 00:24:07 +00:00
#define SRAM_SIZE 0x00100000 /* 1 MB of sram */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
*/
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
#define PCI_HOST_FORCE 1 /* configure as pci host */
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* PCI MEMORY MAP section */
#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
#define CONFIG_SYS_PCI0_MEM_SIZE _128M
#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
#define CONFIG_SYS_PCI1_MEM_SIZE _128M
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
2002-11-03 00:24:07 +00:00
/* PCI I/O MAP section */
#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
#define CONFIG_SYS_PCI0_IO_SIZE _16M
#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
#define CONFIG_SYS_PCI1_IO_SIZE _16M
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000
#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000
2002-11-03 00:24:07 +00:00
/*
* NS16550 Configuration
*/
#define CONFIG_SYS_NS16550
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_NS16550_REG_SIZE -4
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_NS16550_CLK 3686400
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_DUART_IO + 0)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_DUART_IO + 0x20)
2002-11-03 00:24:07 +00:00
/*----------------------------------------------------------------------
* Initial BAT mappings
*/
/* NOTES:
* 1) GUARDED and WRITE_THRU not allowed in IBATS
* 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
*/
/* SDRAM */
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
2002-11-03 00:24:07 +00:00
/* init ram */
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
2002-11-03 00:24:07 +00:00
/* PCI0, PCI1 in one BAT */
#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
2002-11-03 00:24:07 +00:00
/* GT regs, bootrom, all the devices, PCI I/O */
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
2002-11-03 00:24:07 +00:00
/* I2C speed and slave address (for compatability) defaults */
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x7F
2002-11-03 00:24:07 +00:00
/* I2C addresses for the two DIMM SPD chips */
#ifndef CONFIG_EVB64260_750CX
#define DIMM0_I2C_ADDR 0x56
#define DIMM1_I2C_ADDR 0x54
#else /* CONFIG_EVB64260_750CX - only has 1 DIMM */
#define DIMM0_I2C_ADDR 0x54
#define DIMM1_I2C_ADDR 0x54
#endif
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
2002-11-03 00:24:07 +00:00
/*-----------------------------------------------------------------------
* FLASH organization
*/
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_EXTRA_FLASH_DEVICE DEVICE3 /* extra flash at device 3 */
#define CONFIG_SYS_EXTRA_FLASH_WIDTH 4 /* 32 bit */
2002-11-03 00:24:07 +00:00
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CONFIG_SYS_FLASH_CFI 1
2002-11-03 00:24:07 +00:00
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
#define CONFIG_ENV_SECT_SIZE 0x10000
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE)
2002-11-03 00:24:07 +00:00
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
2002-11-03 00:24:07 +00:00
#endif
/*-----------------------------------------------------------------------
* L2CR setup -- make sure this is right for your board!
* look in include/74xx_7xx.h for the defines used here
2002-11-03 00:24:07 +00:00
*/
#define CONFIG_SYS_L2
2002-11-03 00:24:07 +00:00
#ifdef CONFIG_750CX
#define L2_INIT 0
2002-11-03 00:24:07 +00:00
#else
#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
2002-11-03 00:24:07 +00:00
#endif
#define L2_ENABLE (L2_INIT | L2CR_L2E)
#define CONFIG_SYS_BOARD_ASM_INIT 1
2002-11-03 00:24:07 +00:00
#endif /* __CONFIG_H */