u-boot/include/configs/uc101.h

104 lines
2.5 KiB
C
Raw Normal View History

/*
* (C) Copyright 2003-2009
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_UC101 1 /* UC101 board */
#define CONFIG_HOSTNAME uc101
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
#endif
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds"
#include "manroland/common.h"
#include "manroland/mpc5200-common.h"
/*
* Serial console configuration
*/
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Flash configuration
*/
#define CONFIG_SYS_MAX_FLASH_SECT 140
/*
* Environment settings
*/
#define CONFIG_ENV_SECT_SIZE 0x10000
/*
* Memory map
*/
#define CONFIG_SYS_IB_MASTER 0xc0510000 /* CS 6 */
#define CONFIG_SYS_IB_EPLD 0xc0500000 /* CS 7 */
/* SRAM */
#define CONFIG_SYS_SRAM_SIZE 0x200000
/*
* GPIO configuration
*/
#define CONFIG_SYS_GPS_PORT_CONFIG 0x4d558044
#define CONFIG_SYS_MEMTEST_START 0x00300000
#define CONFIG_SYS_MEMTEST_END 0x00f00000
#define CONFIG_SYS_LOAD_ADDR 0x300000
#define CONFIG_SYS_BOOTCS_CFG 0x00045D00
/* 8Mbit SRAM @0x80100000 */
#define CONFIG_SYS_CS1_SIZE 0x00200000
#define CONFIG_SYS_CS1_CFG 0x21D00
/* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */
#define CONFIG_SYS_CS3_START CONFIG_SYS_DISPLAY_BASE
#define CONFIG_SYS_CS3_SIZE 0x00000100
#define CONFIG_SYS_CS3_CFG 0x00081802
/* Interbus Master 16 Bit */
#define CONFIG_SYS_CS6_START CONFIG_SYS_IB_MASTER
#define CONFIG_SYS_CS6_SIZE 0x00010000
#define CONFIG_SYS_CS6_CFG 0x00FF3500
/* Interbus EPLD 8 Bit */
#define CONFIG_SYS_CS7_START CONFIG_SYS_IB_EPLD
#define CONFIG_SYS_CS7_SIZE 0x00010000
#define CONFIG_SYS_CS7_CFG 0x00081800
/*-----------------------------------------------------------------------
* IDE/ATA stuff Supports IDE harddisk
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus*/
/*---------------------------------------------------------------------*/
/* Display addresses */
/*---------------------------------------------------------------------*/
#define CONFIG_SYS_DISP_CHR_RAM (CONFIG_SYS_DISPLAY_BASE + 0x38)
#define CONFIG_SYS_DISP_CWORD (CONFIG_SYS_DISPLAY_BASE + 0x30)
#endif /* __CONFIG_H */