u-boot/drivers/misc/smsc_sio1007.c

127 lines
2.8 KiB
C
Raw Normal View History

/*
* Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <errno.h>
#include <smsc_sio1007.h>
static inline u8 sio1007_read(int port, int reg)
{
outb(reg, port);
return inb(port + 1);
}
static inline void sio1007_write(int port, int reg, int val)
{
outb(reg, port);
outb(val, port + 1);
}
static inline void sio1007_clrsetbits(int port, int reg, u8 clr, u8 set)
{
sio1007_write(port, reg, (sio1007_read(port, reg) & ~clr) | set);
}
void sio1007_enable_serial(int port, int num, int iobase, int irq)
{
if (num < 0 || num > SIO1007_UART_NUM)
return;
/* enter configuration state */
outb(0x55, port);
/* power on serial port and set up its i/o base & irq */
if (!num) {
sio1007_clrsetbits(port, DEV_POWER_CTRL, 0, UART1_POWER_ON);
sio1007_clrsetbits(port, UART1_IOBASE, 0xfe, iobase >> 2);
sio1007_clrsetbits(port, UART_IRQ, 0xf0, irq << 4);
} else {
sio1007_clrsetbits(port, DEV_POWER_CTRL, 0, UART2_POWER_ON);
sio1007_clrsetbits(port, UART2_IOBASE, 0xfe, iobase >> 2);
sio1007_clrsetbits(port, UART_IRQ, 0x0f, irq);
}
/* exit configuration state */
outb(0xaa, port);
}
void sio1007_enable_runtime(int port, int iobase)
{
/* enter configuration state */
outb(0x55, port);
/* set i/o base for the runtime register block */
sio1007_clrsetbits(port, RTR_IOBASE_LOW, 0, iobase >> 4);
sio1007_clrsetbits(port, RTR_IOBASE_HIGH, 0, iobase >> 12);
/* turn on address decoding for this block */
sio1007_clrsetbits(port, DEV_ACTIVATE, 0, RTR_EN);
/* exit configuration state */
outb(0xaa, port);
}
void sio1007_gpio_config(int port, int gpio, int dir, int pol, int type)
{
int reg = GPIO0_DIR;
if (gpio < 0 || gpio > SIO1007_GPIO_NUM)
return;
if (gpio >= GPIO_NUM_PER_GROUP) {
reg = GPIO1_DIR;
gpio -= GPIO_NUM_PER_GROUP;
}
/* enter configuration state */
outb(0x55, port);
/* set gpio pin direction, polority and type */
sio1007_clrsetbits(port, reg, 1 << gpio, dir << gpio);
sio1007_clrsetbits(port, reg + 1, 1 << gpio, pol << gpio);
sio1007_clrsetbits(port, reg + 2, 1 << gpio, type << gpio);
/* exit configuration state */
outb(0xaa, port);
}
int sio1007_gpio_get_value(int port, int gpio)
{
int reg = GPIO0_DATA;
int val;
if (gpio < 0 || gpio > SIO1007_GPIO_NUM)
return -EINVAL;
if (gpio >= GPIO_NUM_PER_GROUP) {
reg = GPIO1_DATA;
gpio -= GPIO_NUM_PER_GROUP;
}
val = inb(port + reg);
if (val & (1 << gpio))
return 1;
else
return 0;
}
void sio1007_gpio_set_value(int port, int gpio, int val)
{
int reg = GPIO0_DATA;
u8 data;
if (gpio < 0 || gpio > SIO1007_GPIO_NUM)
return;
if (gpio >= GPIO_NUM_PER_GROUP) {
reg = GPIO1_DATA;
gpio -= GPIO_NUM_PER_GROUP;
}
data = inb(port + reg);
data &= ~(1 << gpio);
data |= (val << gpio);
outb(data, port + reg);
}