u-boot/board/mpl/vcma9/vcma9.c

226 lines
4.9 KiB
C
Raw Normal View History

/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002, 2010
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <i2c.h>
#include <asm/io.h>
#include <asm/arch/s3c24x0_cpu.h>
#include "vcma9.h"
#include "../common/common_util.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscellaneous platform dependent initialisations
*/
int board_early_init_f(void)
{
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* set up the I/O ports */
writel(0x007FFFFF, &gpio->gpacon);
writel(0x002AAAAA, &gpio->gpbcon);
writel(0x000002BF, &gpio->gpbup);
writel(0xAAAAAAAA, &gpio->gpccon);
writel(0x0000FFFF, &gpio->gpcup);
writel(0xAAAAAAAA, &gpio->gpdcon);
writel(0x0000FFFF, &gpio->gpdup);
writel(0xAAAAAAAA, &gpio->gpecon);
writel(0x000037F7, &gpio->gpeup);
writel(0x00000000, &gpio->gpfcon);
writel(0x00000000, &gpio->gpfup);
writel(0xFFEAFF5A, &gpio->gpgcon);
writel(0x0000F0DC, &gpio->gpgup);
writel(0x0028AAAA, &gpio->gphcon);
writel(0x00000656, &gpio->gphup);
/* setup correct IRQ modes for NIC (rising edge mode) */
writel((readl(&gpio->extint2) & ~(7<<8)) | (4<<8), &gpio->extint2);
/* select USB port 2 to be host or device (setup as host for now) */
writel(readl(&gpio->misccr) | 0x08, &gpio->misccr);
return 0;
}
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x30000100;
icache_enable();
dcache_enable();
return 0;
}
/*
* Get some Board/PLD Info
*/
static u8 get_pld_reg(enum vcma9_pld_regs reg)
{
return readb(VCMA9_PLD_BASE + reg);
}
static u8 get_pld_version(void)
{
return (get_pld_reg(VCMA9_PLD_ID) >> 4) & 0x0F;
}
static u8 get_pld_revision(void)
{
return get_pld_reg(VCMA9_PLD_ID) & 0x0F;
}
static uchar get_board_pcb(void)
{
return ((get_pld_reg(VCMA9_PLD_BOARD) >> 4) & 0x03) + 'A';
}
static u8 get_nr_chips(void)
{
switch ((get_pld_reg(VCMA9_PLD_SDRAM) >> 4) & 0x0F) {
case 0: return 4;
case 1: return 1;
case 2: return 2;
default: return 0;
}
}
static ulong get_chip_size(void)
{
switch (get_pld_reg(VCMA9_PLD_SDRAM) & 0x0F) {
case 0: return 16 * (1024*1024);
case 1: return 32 * (1024*1024);
case 2: return 8 * (1024*1024);
case 3: return 8 * (1024*1024);
default: return 0;
}
}
static const char *get_chip_geom(void)
{
switch (get_pld_reg(VCMA9_PLD_SDRAM) & 0x0F) {
case 0: return "4Mx8x4";
case 1: return "8Mx8x4";
case 2: return "2Mx8x4";
case 3: return "4Mx8x2";
default: return "unknown";
}
}
static void vcma9_show_info(char *board_name, char *serial)
{
printf("Board: %s SN: %s PCB Rev: %c PLD(%d,%d)\n",
board_name, serial,
get_board_pcb(), get_pld_version(), get_pld_revision());
printf("SDRAM: %d chips %s\n", get_nr_chips(), get_chip_geom());
}
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_chip_size() * get_nr_chips();
return 0;
}
/*
* Check Board Identity:
*/
int checkboard(void)
{
char s[50];
int i;
backup_t *b = (backup_t *) s;
i = getenv_f("serial#", s, 32);
if ((i < 0) || strncmp (s, "VCMA9", 5)) {
get_backup_values (b);
if (strncmp (b->signature, "MPL\0", 4) != 0) {
puts ("### No HW ID - assuming VCMA9");
} else {
b->serial_name[5] = 0;
vcma9_show_info(b->serial_name, &b->serial_name[6]);
}
} else {
s[5] = 0;
vcma9_show_info(s, &s[6]);
}
return 0;
}
int board_late_init(void)
{
/*
* check if environment is healthy, otherwise restore values
* from shadow copy
*/
check_env();
return 0;
}
void vcma9_print_info(void)
{
char *s = getenv("serial#");
if (!s) {
puts ("### No HW ID - assuming VCMA9");
} else {
s[5] = 0;
vcma9_show_info(s, &s[6]);
}
}
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_CS8900
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
#endif
return rc;
}
#endif
/*
* Hardcoded flash setup:
* Flash 0 is a non-CFI AMD AM29F400BB flash.
*/
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
{
info->portwidth = FLASH_CFI_16BIT;
info->chipwidth = FLASH_CFI_BY16;
info->interface = FLASH_CFI_X16;
return 1;
}