u-boot/include/configs/lager.h

112 lines
2.8 KiB
C
Raw Normal View History

/*
* include/configs/lager.h
* This file is lager board configuration.
*
* Copyright (C) 2013, 2014 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
*/
#ifndef __LAGER_H
#define __LAGER_H
#undef DEBUG
#define CONFIG_R8A7790
#define CONFIG_RMOBILE_BOARD_STRING "Lager"
#include "rcar-gen2-common.h"
#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
#define CONFIG_SYS_TEXT_BASE 0xB0000000
#else
#define CONFIG_SYS_TEXT_BASE 0xE8080000
#endif
/* STACK */
#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT)
#define CONFIG_SYS_INIT_SP_ADDR 0xB003FFFC
#else
#define CONFIG_SYS_INIT_SP_ADDR 0xE827FFFC
#endif
#define STACK_AREA_SIZE 0xC000
#define LOW_LEVEL_MERAM_STACK \
(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
/* MEMORY */
#define RCAR_GEN2_SDRAM_BASE 0x40000000
#define RCAR_GEN2_SDRAM_SIZE (2048u * 1024 * 1024)
#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
/* SCIF */
#define CONFIG_SCIF_CONSOLE
/* SPI */
#define CONFIG_SPI
#define CONFIG_SH_QSPI
#define CONFIG_SYS_NO_FLASH
/* SH Ether */
#define CONFIG_SH_ETHER
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 0x1
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
#define CONFIG_SH_ETHER_CACHE_WRITEBACK
#define CONFIG_SH_ETHER_CACHE_INVALIDATE
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_RCAR
#define CONFIG_SYS_RCAR_I2C0_SPEED 400000
#define CONFIG_SYS_RCAR_I2C1_SPEED 400000
#define CONFIG_SYS_RCAR_I2C2_SPEED 400000
#define CONFIG_SYS_RCAR_I2C3_SPEED 400000
#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4
#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
/* Board Clock */
#define RMOBILE_XTAL_CLK 20000000u
#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2)
#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15)
#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12)
#define CONFIG_SYS_TMU_CLK_DIV 4
/* USB */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_RMOBILE
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
#define CONFIG_USB_STORAGE
/* MMC */
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_SH_MMCIF
#define CONFIG_SH_MMCIF_ADDR 0xEE220000
#define CONFIG_SH_MMCIF_CLK 97500000
/* Module stop status bits */
/* INTC-RT */
#define CONFIG_SMSTP0_ENA 0x00400000
/* MSIF */
#define CONFIG_SMSTP2_ENA 0x00002000
/* INTC-SYS, IRQC */
#define CONFIG_SMSTP4_ENA 0x00000180
/* SCIF0 */
#define CONFIG_SMSTP7_ENA 0x00200000
/* SDHI */
#define CONFIG_SH_SDHI_FREQ 97500000
#endif /* __LAGER_H */