u-boot/board/gw8260/gw8260.c

640 lines
23 KiB
C
Raw Normal View History

2002-11-03 01:41:26 +00:00
/*
* (C) Copyright 2000
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2001
* Advent Networks, Inc. <http://www.adventnetworks.com>
* Jay Monkman <jtm@smoothsmoothie.com>
*
* (C) Copyright 2001
* Advent Networks, Inc. <http://www.adventnetworks.com>
* Oliver Brown <oliverb@alumni.utexas.net>
*
* SPDX-License-Identifier: GPL-2.0+
2002-11-03 01:41:26 +00:00
*/
/*********************************************************************/
/* DESCRIPTION:
* This file contains the board routines for the GW8260 board.
*
* MODULE DEPENDENCY:
* None
*
* RESTRICTIONS/LIMITATIONS:
* None
*
* Copyright (c) 2001, Advent Networks, Inc.
*/
/*********************************************************************/
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
/*
* I/O Port configuration table
*
*/
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A configuration */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { 1, 0, 0, 1, 0, 0 }, /* TP14 */
/* PA30 */ { 1, 1, 1, 1, 0, 0 }, /* US_RTS */
/* PA29 */ { 1, 0, 0, 1, 0, 1 }, /* LSSI_DATA */
/* PA28 */ { 1, 0, 0, 1, 0, 1 }, /* LSSI_CLK */
/* PA27 */ { 1, 0, 0, 1, 0, 0 }, /* TP12 */
/* PA26 */ { 1, 0, 0, 0, 0, 0 }, /* IO_STATUS */
/* PA25 */ { 1, 0, 0, 0, 0, 0 }, /* IO_CLOCK */
/* PA24 */ { 1, 0, 0, 0, 0, 0 }, /* IO_CONFIG */
/* PA23 */ { 1, 0, 0, 0, 0, 0 }, /* IO_DONE */
/* PA22 */ { 1, 0, 0, 0, 0, 0 }, /* IO_DATA */
/* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD3 */
/* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD2 */
/* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD1 */
/* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD0 */
/* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD0 */
/* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD1 */
/* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD2 */
/* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD3 */
/* PA13 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE7 */
/* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE6 */
/* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE5 */
/* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE4 */
/* PA9 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE3 */
/* PA8 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE2 */
/* PA7 */ { 1, 0, 0, 0, 0, 0 }, /* LSSI_IN */
/* PA6 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE0 */
/* PA5 */ { 1, 0, 0, 1, 0, 0 }, /* DEMOD_RESET_ */
/* PA4 */ { 1, 0, 0, 1, 0, 0 }, /* MOD_RESET_ */
/* PA3 */ { 1, 0, 0, 1, 0, 0 }, /* IO_RESET */
/* PA2 */ { 1, 0, 0, 1, 0, 0 }, /* TX_ENABLE */
/* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* RX_LOCK */
/* PA0 */ { 1, 0, 0, 1, 0, 1 } /* MPC_RESET_ */
},
/* Port B configuration */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TX_ER */
/* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_DV */
/* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FETH0_TX_EN */
/* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_ER */
/* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_COL */
/* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_CRS */
/* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD3 */
/* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD2 */
/* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD1 */
/* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD0 */
/* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD0 */
/* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD1 */
/* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD2 */
/* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD3 */
/* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_DV */
/* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_ER */
/* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TX_ER */
/* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TX_EN */
/* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_COL */
/* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_CRS */
/* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD3 */
/* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD2 */
/* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD1 */
/* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD0 */
/* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD0 */
/* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD1 */
/* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD2 */
/* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD3 */
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
},
/* Port C */
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 1, 0, 0, 1, 0, 1 }, /* FAST_RESET_ */
/* PC30 */ { 1, 0, 0, 1, 0, 1 }, /* FAST_PAUSE_ */
/* PC29 */ { 1, 0, 0, 1, 0, 0 }, /* FAST_SLEW1 */
/* PC28 */ { 1, 0, 0, 1, 0, 0 }, /* FAST_SLEW0 */
/* PC27 */ { 1, 0, 0, 1, 0, 0 }, /* TP13 */
/* PC26 */ { 1, 0, 0, 0, 0, 0 }, /* RXDECDFLG */
/* PC25 */ { 1, 0, 0, 0, 0, 0 }, /* RXACQFAIL */
/* PC24 */ { 1, 0, 0, 0, 0, 0 }, /* RXACQFLG */
/* PC23 */ { 1, 0, 0, 1, 0, 0 }, /* WD_TCL */
/* PC22 */ { 1, 0, 0, 1, 0, 0 }, /* WD_EN */
/* PC21 */ { 1, 0, 0, 1, 0, 0 }, /* US_TXCLK */
/* PC20 */ { 1, 0, 0, 0, 0, 0 }, /* DS_RXCLK */
/* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_CLK */
/* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_TX_CLK */
/* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_CLK */
/* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_TX_CLK */
/* PC15 */ { 1, 0, 0, 1, 0, 0 }, /* TX_SHUTDOWN_ */
/* PC14 */ { 1, 0, 0, 0, 0, 0 }, /* RS_232_DTR_ */
/* PC13 */ { 1, 0, 0, 0, 0, 0 }, /* TXERR */
/* PC12 */ { 1, 0, 0, 1, 0, 1 }, /* FETH1_MDDIS */
/* PC11 */ { 1, 0, 0, 1, 0, 1 }, /* FETH0_MDDIS */
/* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* MDC */
/* PC9 */ { 1, 0, 0, 1, 1, 1 }, /* MDIO */
/* PC8 */ { 1, 0, 0, 1, 1, 1 }, /* SER_NUM */
/* PC7 */ { 1, 1, 0, 0, 0, 0 }, /* US_CTS */
/* PC6 */ { 1, 1, 0, 0, 0, 0 }, /* DS_CD_ */
/* PC5 */ { 1, 0, 0, 1, 0, 0 }, /* FETH1_PWRDWN */
/* PC4 */ { 1, 0, 0, 1, 0, 0 }, /* FETH0_PWRDWN */
/* PC3 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED3 */
/* PC2 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED2 */
/* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED1 */
/* PC0 */ { 1, 0, 0, 1, 0, 1 }, /* MPULED0 */
},
/* Port D */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD30 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD29 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD28 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD27 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD26 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD25 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD24 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD23 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD22 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD21 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD20 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD19 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
/* PD18 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
/* PD17 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
/* PD16 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
/* PD15 */ { 1, 1, 1, 0, 1, 1 }, /* SDRAM_SDA */
/* PD14 */ { 1, 1, 1, 0, 1, 1 }, /* SDRAM_SCL */
/* PD13 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED7 */
/* PD12 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED6 */
/* PD11 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED5 */
/* PD10 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED4 */
/* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* RS232_TXD */
/* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* RD232_RXD */
/* PD7 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD6 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD5 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD4 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
}
};
/*********************************************************************/
/* NAME: checkboard() - Displays the board type and serial number */
/* */
/* OUTPUTS: */
/* Displays the board type and serial number */
/* */
/* RETURNS: */
/* Always returns 1 */
/* */
/* RESTRICTIONS/LIMITATIONS: */
/* */
/* */
/*********************************************************************/
int checkboard (void)
2002-11-03 01:41:26 +00:00
{
char buf[64];
int i = getenv_f("serial#", buf, sizeof(buf));
2002-11-03 01:41:26 +00:00
puts ("Board: Advent Networks gw8260\n");
if (i > 0) {
printf("SN: %s\n", buf);
}
return 0;
2002-11-03 01:41:26 +00:00
}
#if defined (CONFIG_SYS_DRAM_TEST)
2002-11-03 01:41:26 +00:00
/*********************************************************************/
/* NAME: move64() - moves a double word (64-bit) */
/* */
/* DESCRIPTION: */
/* this function performs a double word move from the data at */
/* the source pointer to the location at the destination pointer. */
/* */
/* INPUTS: */
/* unsigned long long *src - pointer to data to move */
/* */
/* OUTPUTS: */
/* unsigned long long *dest - pointer to locate to move data */
/* */
/* RETURNS: */
/* None */
/* */
/* RESTRICTIONS/LIMITATIONS: */
/* May cloober fr0. */
/* */
/*********************************************************************/
static void move64 (unsigned long long *src, unsigned long long *dest)
2002-11-03 01:41:26 +00:00
{
asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
"stfd 0, 0(4)" /* *dest = fpr0 */
: : : "fr0"); /* Clobbers fr0 */
return;
2002-11-03 01:41:26 +00:00
}
#if defined (CONFIG_SYS_DRAM_TEST_DATA)
2002-11-03 01:41:26 +00:00
unsigned long long pattern[] = {
0xaaaaaaaaaaaaaaaaULL,
0xccccccccccccccccULL,
0xf0f0f0f0f0f0f0f0ULL,
0xff00ff00ff00ff00ULL,
0xffff0000ffff0000ULL,
0xffffffff00000000ULL,
0x00000000ffffffffULL,
0x0000ffff0000ffffULL,
0x00ff00ff00ff00ffULL,
0x0f0f0f0f0f0f0f0fULL,
0x3333333333333333ULL,
0x5555555555555555ULL,
};
2002-11-03 01:41:26 +00:00
/*********************************************************************/
/* NAME: mem_test_data() - test data lines for shorts and opens */
/* */
/* DESCRIPTION: */
/* Tests data lines for shorts and opens by forcing adjacent data */
/* to opposite states. Because the data lines could be routed in */
/* an arbitrary manner the must ensure test patterns ensure that */
/* every case is tested. By using the following series of binary */
/* patterns every combination of adjacent bits is test regardless */
/* of routing. */
/* */
/* ...101010101010101010101010 */
/* ...110011001100110011001100 */
/* ...111100001111000011110000 */
/* ...111111110000000011111111 */
/* */
/* Carrying this out, gives us six hex patterns as follows: */
/* */
/* 0xaaaaaaaaaaaaaaaa */
/* 0xcccccccccccccccc */
/* 0xf0f0f0f0f0f0f0f0 */
/* 0xff00ff00ff00ff00 */
/* 0xffff0000ffff0000 */
/* 0xffffffff00000000 */
/* */
/* The number test patterns will always be given by: */
/* */
/* log(base 2)(number data bits) = log2 (64) = 6 */
/* */
/* To test for short and opens to other signals on our boards. we */
/* simply */
/* test with the 1's complemnt of the paterns as well. */
/* */
/* OUTPUTS: */
/* Displays failing test pattern */
/* */
/* RETURNS: */
/* 0 - Passed test */
/* 1 - Failed test */
/* */
/* RESTRICTIONS/LIMITATIONS: */
/* Assumes only one one SDRAM bank */
/* */
/*********************************************************************/
int mem_test_data (void)
2002-11-03 01:41:26 +00:00
{
unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_SDRAM_BASE;
2005-10-13 14:45:02 +00:00
unsigned long long temp64 = 0;
int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
int i;
unsigned int hi, lo;
for (i = 0; i < num_patterns; i++) {
move64 (&(pattern[i]), pmem);
move64 (pmem, &temp64);
/* hi = (temp64>>32) & 0xffffffff; */
/* lo = temp64 & 0xffffffff; */
/* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
hi = (pattern[i] >> 32) & 0xffffffff;
lo = pattern[i] & 0xffffffff;
/* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */
if (temp64 != pattern[i]) {
printf ("\n Data Test Failed, pattern 0x%08x%08x",
hi, lo);
return 1;
}
2002-11-03 01:41:26 +00:00
}
return 0;
2002-11-03 01:41:26 +00:00
}
#endif /* CONFIG_SYS_DRAM_TEST_DATA */
2002-11-03 01:41:26 +00:00
#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
2002-11-03 01:41:26 +00:00
/*********************************************************************/
/* NAME: mem_test_address() - test address lines */
/* */
/* DESCRIPTION: */
/* This function performs a test to verify that each word im */
/* memory is uniquly addressable. The test sequence is as follows: */
/* */
/* 1) write the address of each word to each word. */
/* 2) verify that each location equals its address */
/* */
/* OUTPUTS: */
/* Displays failing test pattern and address */
/* */
/* RETURNS: */
/* 0 - Passed test */
/* 1 - Failed test */
/* */
/* RESTRICTIONS/LIMITATIONS: */
/* */
/* */
/*********************************************************************/
int mem_test_address (void)
2002-11-03 01:41:26 +00:00
{
volatile unsigned int *pmem =
(volatile unsigned int *) CONFIG_SYS_SDRAM_BASE;
const unsigned int size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024) / 4;
unsigned int i;
/* write address to each location */
for (i = 0; i < size; i++) {
pmem[i] = i;
}
2002-11-03 01:41:26 +00:00
/* verify each loaction */
for (i = 0; i < size; i++) {
if (pmem[i] != i) {
printf ("\n Address Test Failed at 0x%x", i);
return 1;
}
2002-11-03 01:41:26 +00:00
}
return 0;
2002-11-03 01:41:26 +00:00
}
#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */
2002-11-03 01:41:26 +00:00
#if defined (CONFIG_SYS_DRAM_TEST_WALK)
2002-11-03 01:41:26 +00:00
/*********************************************************************/
/* NAME: mem_march() - memory march */
/* */
/* DESCRIPTION: */
/* Marches up through memory. At each location verifies rmask if */
/* read = 1. At each location write wmask if write = 1. Displays */
/* failing address and pattern. */
/* */
/* INPUTS: */
/* volatile unsigned long long * base - start address of test */
/* unsigned int size - number of dwords(64-bit) to test */
/* unsigned long long rmask - read verify mask */
/* unsigned long long wmask - wrtie verify mask */
/* short read - verifies rmask if read = 1 */
/* short write - writes wmask if write = 1 */
/* */
/* OUTPUTS: */
/* Displays failing test pattern and address */
/* */
/* RETURNS: */
/* 0 - Passed test */
/* 1 - Failed test */
/* */
/* RESTRICTIONS/LIMITATIONS: */
/* */
/* */
/*********************************************************************/
int mem_march (volatile unsigned long long *base,
unsigned int size,
unsigned long long rmask,
unsigned long long wmask, short read, short write)
2002-11-03 01:41:26 +00:00
{
unsigned int i;
2005-10-13 14:45:02 +00:00
unsigned long long temp = 0;
unsigned int hitemp, lotemp, himask, lomask;
for (i = 0; i < size; i++) {
if (read != 0) {
/* temp = base[i]; */
move64 ((unsigned long long *) &(base[i]), &temp);
if (rmask != temp) {
hitemp = (temp >> 32) & 0xffffffff;
lotemp = temp & 0xffffffff;
himask = (rmask >> 32) & 0xffffffff;
lomask = rmask & 0xffffffff;
printf ("\n Walking one's test failed: address = 0x%08x," "\n\texpected 0x%08x%08x, found 0x%08x%08x", i << 3, himask, lomask, hitemp, lotemp);
return 1;
}
}
if (write != 0) {
/* base[i] = wmask; */
move64 (&wmask, (unsigned long long *) &(base[i]));
}
2002-11-03 01:41:26 +00:00
}
return 0;
2002-11-03 01:41:26 +00:00
}
#endif /* CONFIG_SYS_DRAM_TEST_WALK */
2002-11-03 01:41:26 +00:00
/*********************************************************************/
/* NAME: mem_test_walk() - a simple walking ones test */
/* */
/* DESCRIPTION: */
/* Performs a walking ones through entire physical memory. The */
/* test uses as series of memory marches, mem_march(), to verify */
/* and write the test patterns to memory. The test sequence is as */
/* follows: */
/* 1) march writing 0000...0001 */
/* 2) march verifying 0000...0001 , writing 0000...0010 */
/* 3) repeat step 2 shifting masks left 1 bit each time unitl */
/* the write mask equals 1000...0000 */
/* 4) march verifying 1000...0000 */
/* The test fails if any of the memory marches return a failure. */
/* */
/* OUTPUTS: */
/* Displays which pass on the memory test is executing */
/* */
/* RETURNS: */
/* 0 - Passed test */
/* 1 - Failed test */
/* */
/* RESTRICTIONS/LIMITATIONS: */
/* */
/* */
/*********************************************************************/
int mem_test_walk (void)
2002-11-03 01:41:26 +00:00
{
unsigned long long mask;
volatile unsigned long long *pmem =
(volatile unsigned long long *) CONFIG_SYS_SDRAM_BASE;
const unsigned long size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024) / 8;
unsigned int i;
mask = 0x01;
printf ("Initial Pass");
mem_march (pmem, size, 0x0, 0x1, 0, 1);
printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
printf (" ");
printf ("\b\b\b\b\b\b\b\b\b\b\b\b");
for (i = 0; i < 63; i++) {
printf ("Pass %2d", i + 2);
if (mem_march (pmem, size, mask, mask << 1, 1, 1) != 0) {
/*printf("mask: 0x%x, pass: %d, ", mask, i); */
return 1;
}
mask = mask << 1;
printf ("\b\b\b\b\b\b\b");
2002-11-03 01:41:26 +00:00
}
printf ("Last Pass");
if (mem_march (pmem, size, 0, mask, 0, 1) != 0) {
/* printf("mask: 0x%x", mask); */
return 1;
}
printf ("\b\b\b\b\b\b\b\b\b");
printf (" ");
printf ("\b\b\b\b\b\b\b\b\b");
2002-11-03 01:41:26 +00:00
return 0;
2002-11-03 01:41:26 +00:00
}
/*********************************************************************/
/* NAME: testdram() - calls any enabled memory tests */
/* */
/* DESCRIPTION: */
/* Runs memory tests if the environment test variables are set to */
/* 'y'. */
/* */
/* INPUTS: */
/* testdramdata - If set to 'y', data test is run. */
/* testdramaddress - If set to 'y', address test is run. */
/* testdramwalk - If set to 'y', walking ones test is run */
/* */
/* OUTPUTS: */
/* None */
/* */
/* RETURNS: */
/* 0 - Passed test */
/* 1 - Failed test */
/* */
/* RESTRICTIONS/LIMITATIONS: */
/* */
/* */
/*********************************************************************/
int testdram (void)
2002-11-03 01:41:26 +00:00
{
int rundata, runaddress, runwalk;
rundata = getenv_yesno("testdramdata") == 1;
runaddress = getenv_yesno("testdramaddress") == 1;
runwalk = getenv_yesno("testdramwalk") == 1;
if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
printf ("Testing RAM ... ");
}
#ifdef CONFIG_SYS_DRAM_TEST_DATA
if (rundata == 1) {
if (mem_test_data () == 1) {
return 1;
}
2002-11-03 01:41:26 +00:00
}
#endif
#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
if (runaddress == 1) {
if (mem_test_address () == 1) {
return 1;
}
2002-11-03 01:41:26 +00:00
}
#endif
#ifdef CONFIG_SYS_DRAM_TEST_WALK
if (runwalk == 1) {
if (mem_test_walk () == 1) {
return 1;
}
2002-11-03 01:41:26 +00:00
}
#endif
if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
printf ("passed");
}
return 0;
2002-11-03 01:41:26 +00:00
}
#endif /* CONFIG_SYS_DRAM_TEST */
2002-11-03 01:41:26 +00:00
/*********************************************************************/
/* NAME: initdram() - initializes SDRAM controller */
/* */
/* DESCRIPTION: */
/* Initializes the MPC8260's SDRAM controller. */
/* */
/* INPUTS: */
/* CONFIG_SYS_IMMR - MPC8260 Internal memory map */
/* CONFIG_SYS_SDRAM_BASE - Physical start address of SDRAM */
/* CONFIG_SYS_PSDMR - SDRAM mode register */
/* CONFIG_SYS_MPTPR - Memory refresh timer prescaler register */
/* CONFIG_SYS_SDRAM0_SIZE - SDRAM size */
2002-11-03 01:41:26 +00:00
/* */
/* RETURNS: */
/* SDRAM size in bytes */
/* */
/* RESTRICTIONS/LIMITATIONS: */
/* */
/* */
/*********************************************************************/
phys_size_t initdram (int board_type)
2002-11-03 01:41:26 +00:00
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
ulong psdmr = CONFIG_SYS_PSDMR;
int i;
/*
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
*
* "At system reset, initialization software must set up the
* programmable parameters in the memory controller banks registers
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
* system software should execute the following initialization sequence
* for each SDRAM device.
*
* 1. Issue a PRECHARGE-ALL-BANKS command
* 2. Issue eight CBR REFRESH commands
* 3. Issue a MODE-SET command to initialize the mode register
*
* The initial commands are executed by setting P/LSDMR[OP] and
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
* get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
memctl->memc_psrt = CONFIG_SYS_PSRT;
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
2002-11-03 01:41:26 +00:00
*ramaddr = c;
memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
for (i = 0; i < 8; i++) {
*ramaddr = c;
}
memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
*ramaddr = c;
memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*ramaddr = c;
2002-11-03 01:41:26 +00:00
/* return total ram size */
return (CONFIG_SYS_SDRAM0_SIZE * 1024 * 1024);
2002-11-03 01:41:26 +00:00
}
/*********************************************************************/
/* End of gw8260.c */
/*********************************************************************/