u-boot/arch/powerpc/lib/Makefile

105 lines
2.2 KiB
Makefile
Raw Normal View History

2002-08-14 08:04:29 +00:00
#
# (C) Copyright 2000-2006
2002-08-14 08:04:29 +00:00
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
2002-08-14 08:04:29 +00:00
#
include $(TOPDIR)/config.mk
powerpc: Minimal private libgcc to build on Debian Standard Debian powerpc and powerpcspe systems only include hard-float libgcc in their native compilers, which causes scary build warnings when building U-Boot. Debian and other PowerPC-supporting distributions used to provide libgcc and other libraries in a "nof" (soft-float) form in the "multilib" packages. As they were completely unused by the distribution and therefore tended to be very buggy it was decided to save some time on the part of the maintainers and build-servers by removing them. Admittedly, right now the linker warnings do not indicate any problems, as the included routines do not use any floating point at all. The concern is that if floating-point code were ever added it might cause hard-float code to be unexpectedly included in U-Boot without generating a hard error. This would cause unexplained crashes or indeterminate results at runtime. The easiest way to resolve this is to borrow the routines that U-Boot needs from the Linux kernel, which has the same issue. Specifically, the routines are: _ashldi3(), _ashrdi3(), and _lshrdi3(). They were borrowed from arch/powerpc/kernel/misc_32.S as of v2.6.38-rc5, commit 85e2efbb1db9a18d218006706d6e4fbeb0216213, and are GPLv2+. The Makefile framework was copied from the U-Boot ARM port. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com> Cc: Stefan Roese <sr@denx.de>
2011-02-23 06:40:38 +00:00
## Build a couple of necessary functions into a private libgcc
LIBGCC = $(obj)libgcc.o
GLSOBJS += _ashldi3.o
GLSOBJS += _ashrdi3.o
GLSOBJS += _lshrdi3.o
LGOBJS := $(addprefix $(obj),$(GLSOBJS)) \
$(addprefix $(obj),$(GLCOBJS))
## But only build it if the user asked for it
ifdef USE_PRIVATE_LIBGCC
TARGETS += $(LIBGCC)
endif
LIB = $(obj)lib$(ARCH).o
2002-08-14 08:04:29 +00:00
MINIMAL=
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_INIT_MINIMAL
MINIMAL=y
endif
endif
ifdef MINIMAL
COBJS-y += cache.o time.o
SOBJS-y += ticks.o
else
SOBJS-y += ppcstring.o
SOBJS-y += ppccache.o
SOBJS-y += ticks.o
SOBJS-y += reloc.o
COBJS-$(CONFIG_BAT_RW) += bat_rw.o
ifndef CONFIG_SPL_BUILD
ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
endif
endif
COBJS-$(CONFIG_CMD_BOOTM) += bootm.o
COBJS-y += cache.o
COBJS-y += extable.o
COBJS-y += interrupts.o
COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
COBJS-${CONFIG_CMD_IDE} += ide.o
COBJS-y += time.o
# Don't include the MPC5xxx special memcpy into the
# SPL U-Boot image. memcpy is used in the SPL NOR
# flash driver. And we need the real, fast memcpy
# here. We have no problems with unaligned access.
ifndef CONFIG_SPL_BUILD
# Workaround for local bus unaligned access problems
# on MPC512x and MPC5200
ifdef CONFIG_MPC512X
$(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy
COBJS-y += memcpy_mpc5200.o
endif
2010-06-21 20:29:59 +00:00
ifdef CONFIG_MPC5200
$(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy
COBJS-y += memcpy_mpc5200.o
2010-06-21 20:29:59 +00:00
endif
endif
2010-06-21 20:29:59 +00:00
endif # not minimal
ifdef CONFIG_SPL_BUILD
COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
endif
COBJS += $(sort $(COBJS-y))
powerpc: Minimal private libgcc to build on Debian Standard Debian powerpc and powerpcspe systems only include hard-float libgcc in their native compilers, which causes scary build warnings when building U-Boot. Debian and other PowerPC-supporting distributions used to provide libgcc and other libraries in a "nof" (soft-float) form in the "multilib" packages. As they were completely unused by the distribution and therefore tended to be very buggy it was decided to save some time on the part of the maintainers and build-servers by removing them. Admittedly, right now the linker warnings do not indicate any problems, as the included routines do not use any floating point at all. The concern is that if floating-point code were ever added it might cause hard-float code to be unexpectedly included in U-Boot without generating a hard error. This would cause unexplained crashes or indeterminate results at runtime. The easiest way to resolve this is to borrow the routines that U-Boot needs from the Linux kernel, which has the same issue. Specifically, the routines are: _ashldi3(), _ashrdi3(), and _lshrdi3(). They were borrowed from arch/powerpc/kernel/misc_32.S as of v2.6.38-rc5, commit 85e2efbb1db9a18d218006706d6e4fbeb0216213, and are GPLv2+. The Makefile framework was copied from the U-Boot ARM port. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com> Cc: Stefan Roese <sr@denx.de>
2011-02-23 06:40:38 +00:00
SRCS := $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \
$(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
powerpc: Minimal private libgcc to build on Debian Standard Debian powerpc and powerpcspe systems only include hard-float libgcc in their native compilers, which causes scary build warnings when building U-Boot. Debian and other PowerPC-supporting distributions used to provide libgcc and other libraries in a "nof" (soft-float) form in the "multilib" packages. As they were completely unused by the distribution and therefore tended to be very buggy it was decided to save some time on the part of the maintainers and build-servers by removing them. Admittedly, right now the linker warnings do not indicate any problems, as the included routines do not use any floating point at all. The concern is that if floating-point code were ever added it might cause hard-float code to be unexpectedly included in U-Boot without generating a hard error. This would cause unexplained crashes or indeterminate results at runtime. The easiest way to resolve this is to borrow the routines that U-Boot needs from the Linux kernel, which has the same issue. Specifically, the routines are: _ashldi3(), _ashrdi3(), and _lshrdi3(). They were borrowed from arch/powerpc/kernel/misc_32.S as of v2.6.38-rc5, commit 85e2efbb1db9a18d218006706d6e4fbeb0216213, and are GPLv2+. The Makefile framework was copied from the U-Boot ARM port. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com> Cc: Stefan Roese <sr@denx.de>
2011-02-23 06:40:38 +00:00
TARGETS += $(LIB)
all: $(TARGETS)
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
2002-08-14 08:04:29 +00:00
powerpc: Minimal private libgcc to build on Debian Standard Debian powerpc and powerpcspe systems only include hard-float libgcc in their native compilers, which causes scary build warnings when building U-Boot. Debian and other PowerPC-supporting distributions used to provide libgcc and other libraries in a "nof" (soft-float) form in the "multilib" packages. As they were completely unused by the distribution and therefore tended to be very buggy it was decided to save some time on the part of the maintainers and build-servers by removing them. Admittedly, right now the linker warnings do not indicate any problems, as the included routines do not use any floating point at all. The concern is that if floating-point code were ever added it might cause hard-float code to be unexpectedly included in U-Boot without generating a hard error. This would cause unexplained crashes or indeterminate results at runtime. The easiest way to resolve this is to borrow the routines that U-Boot needs from the Linux kernel, which has the same issue. Specifically, the routines are: _ashldi3(), _ashrdi3(), and _lshrdi3(). They were borrowed from arch/powerpc/kernel/misc_32.S as of v2.6.38-rc5, commit 85e2efbb1db9a18d218006706d6e4fbeb0216213, and are GPLv2+. The Makefile framework was copied from the U-Boot ARM port. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com> Cc: Stefan Roese <sr@denx.de>
2011-02-23 06:40:38 +00:00
$(LIBGCC): $(obj).depend $(LGOBJS)
$(call cmd_link_o_target, $(LGOBJS))
2002-08-14 08:04:29 +00:00
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
2002-08-14 08:04:29 +00:00
sinclude $(obj).depend
2002-08-14 08:04:29 +00:00
#########################################################################