u-boot/arch/arm/mach-omap2/pipe3-phy.c

232 lines
5.8 KiB
C
Raw Normal View History

/*
* TI PIPE3 PHY
*
* (C) Copyright 2013
* Texas Instruments, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <sata.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <linux/errno.h>
#include "pipe3-phy.h"
/* PLLCTRL Registers */
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
#define PLL_CONFIGURATION1 0x0000000C
#define PLL_CONFIGURATION2 0x00000010
#define PLL_CONFIGURATION3 0x00000014
#define PLL_CONFIGURATION4 0x00000020
#define PLL_REGM_MASK 0x001FFE00
#define PLL_REGM_SHIFT 9
#define PLL_REGM_F_MASK 0x0003FFFF
#define PLL_REGM_F_SHIFT 0
#define PLL_REGN_MASK 0x000001FE
#define PLL_REGN_SHIFT 1
#define PLL_SELFREQDCO_MASK 0x0000000E
#define PLL_SELFREQDCO_SHIFT 1
#define PLL_SD_MASK 0x0003FC00
#define PLL_SD_SHIFT 10
#define SET_PLL_GO 0x1
#define PLL_TICOPWDN BIT(16)
#define PLL_LDOPWDN BIT(15)
#define PLL_LOCK 0x2
#define PLL_IDLE 0x1
/* PHY POWER CONTROL Register */
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
#define PLL_IDLE_TIME 100 /* in milliseconds */
#define PLL_LOCK_TIME 100 /* in milliseconds */
static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset)
{
return __raw_readl(addr + offset);
}
static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset,
u32 data)
{
__raw_writel(data, addr + offset);
}
static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3
*pipe3)
{
u32 rate;
struct pipe3_dpll_map *dpll_map = pipe3->dpll_map;
rate = get_sys_clk_freq();
for (; dpll_map->rate; dpll_map++) {
if (rate == dpll_map->rate)
return &dpll_map->params;
}
printf("%s: No DPLL configuration for %u Hz SYS CLK\n",
__func__, rate);
return NULL;
}
static int omap_pipe3_wait_lock(struct omap_pipe3 *phy)
{
u32 val;
int timeout = PLL_LOCK_TIME;
do {
mdelay(1);
val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
if (val & PLL_LOCK)
break;
} while (--timeout);
if (!(val & PLL_LOCK)) {
printf("%s: DPLL failed to lock\n", __func__);
return -EBUSY;
}
return 0;
}
static int omap_pipe3_dpll_program(struct omap_pipe3 *phy)
{
u32 val;
struct pipe3_dpll_params *dpll_params;
dpll_params = omap_pipe3_get_dpll_params(phy);
if (!dpll_params) {
printf("%s: Invalid DPLL parameters\n", __func__);
return -EINVAL;
}
val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
val &= ~PLL_REGN_MASK;
val |= dpll_params->n << PLL_REGN_SHIFT;
omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
val &= ~PLL_SELFREQDCO_MASK;
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
val &= ~PLL_REGM_MASK;
val |= dpll_params->m << PLL_REGM_SHIFT;
omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
val &= ~PLL_REGM_F_MASK;
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
val &= ~PLL_SD_MASK;
val |= dpll_params->sd << PLL_SD_SHIFT;
omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
omap_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
return omap_pipe3_wait_lock(phy);
}
static void omap_control_phy_power(struct omap_pipe3 *phy, int on)
{
u32 val, rate;
val = readl(phy->power_reg);
rate = get_sys_clk_freq();
rate = rate/1000000;
if (on) {
val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
val |= rate <<
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
} else {
val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
}
writel(val, phy->power_reg);
}
int phy_pipe3_power_on(struct omap_pipe3 *phy)
{
int ret;
u32 val;
/* Program the DPLL only if not locked */
val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
if (!(val & PLL_LOCK)) {
ret = omap_pipe3_dpll_program(phy);
if (ret)
return ret;
} else {
/* else just bring it out of IDLE mode */
val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
if (val & PLL_IDLE) {
val &= ~PLL_IDLE;
omap_pipe3_writel(phy->pll_ctrl_base,
PLL_CONFIGURATION2, val);
ret = omap_pipe3_wait_lock(phy);
if (ret)
return ret;
}
}
/* Power up the PHY */
omap_control_phy_power(phy, 1);
return 0;
}
int phy_pipe3_power_off(struct omap_pipe3 *phy)
{
u32 val;
int timeout = PLL_IDLE_TIME;
/* Power down the PHY */
omap_control_phy_power(phy, 0);
/* Put DPLL in IDLE mode */
val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
val |= PLL_IDLE;
omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
/* wait for LDO and Oscillator to power down */
do {
mdelay(1);
val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
break;
} while (--timeout);
if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
printf("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
__func__, val);
return -EBUSY;
}
return 0;
}