u-boot/board/eNET/eNET.c

168 lines
5.0 KiB
C
Raw Normal View History

/*
* (C) Copyright 2008
* Graeme Russ, graeme.russ@gmail.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/ic/sc520.h>
#ifdef CONFIG_HW_WATCHDOG
#include <watchdog.h>
#endif
#include "hardware.h"
DECLARE_GLOBAL_DATA_PTR;
#undef SC520_CDP_DEBUG
#ifdef SC520_CDP_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
void init_sc520_enet (void)
{
/* Set CPU Speed to 100MHz */
write_mmcr_byte(SC520_CPUCTL, 1);
gd->cpu_clk = 100000000;
/* wait at least one millisecond */
asm("movl $0x2000,%%ecx\n"
"wait_loop: pushl %%ecx\n"
"popl %%ecx\n"
"loop wait_loop\n": : : "ecx");
/* turn on the SDRAM write buffer */
write_mmcr_byte(SC520_DBCTL, 0x11);
/* turn on the cache and disable write through */
asm("movl %%cr0, %%eax\n"
"andl $0x9fffffff, %%eax\n"
"movl %%eax, %%cr0\n" : : : "eax");
}
/*
* Miscellaneous platform dependent initializations
*/
int board_init(void)
{
init_sc520_enet();
write_mmcr_byte(SC520_GPCSRT, 0x01); /* GP Chip Select Recovery Time */
write_mmcr_byte(SC520_GPCSPW, 0x07); /* GP Chip Select Pulse Width */
write_mmcr_byte(SC520_GPCSOFF, 0x00); /* GP Chip Select Offset */
write_mmcr_byte(SC520_GPRDW, 0x05); /* GP Read pulse width */
write_mmcr_byte(SC520_GPRDOFF, 0x01); /* GP Read offset */
write_mmcr_byte(SC520_GPWRW, 0x05); /* GP Write pulse width */
write_mmcr_byte(SC520_GPWROFF, 0x01); /* GP Write offset */
write_mmcr_word(SC520_PIODATA15_0, 0x0630); /* PIO15_PIO0 Data */
write_mmcr_word(SC520_PIODATA31_16, 0x2000); /* PIO31_PIO16 Data */
write_mmcr_word(SC520_PIODIR31_16, 0x2000); /* GPIO Direction */
write_mmcr_word(SC520_PIODIR15_0, 0x87b5); /* GPIO Direction */
write_mmcr_word(SC520_PIOPFS31_16, 0x0dfe); /* GPIO pin function 31-16 reg */
write_mmcr_word(SC520_PIOPFS15_0, 0x200a); /* GPIO pin function 15-0 reg */
write_mmcr_byte(SC520_CSPFS, 0x00f8); /* Chip Select Pin Function Select */
write_mmcr_long(SC520_PAR2, 0x200713f8); /* Uart A (GPCS0, 0x013f8, 8 Bytes) */
write_mmcr_long(SC520_PAR3, 0x2c0712f8); /* Uart B (GPCS3, 0x012f8, 8 Bytes) */
write_mmcr_long(SC520_PAR4, 0x300711f8); /* Uart C (GPCS4, 0x011f8, 8 Bytes) */
write_mmcr_long(SC520_PAR5, 0x340710f8); /* Uart D (GPCS5, 0x010f8, 8 Bytes) */
write_mmcr_long(SC520_PAR6, 0xe3ffc000); /* SDRAM (0x00000000, 128MB) */
write_mmcr_long(SC520_PAR7, 0xaa3fd000); /* StrataFlash (ROMCS1, 0x10000000, 16MB) */
write_mmcr_long(SC520_PAR8, 0xca3fd100); /* StrataFlash (ROMCS2, 0x11000000, 16MB) */
write_mmcr_long(SC520_PAR9, 0x4203d900); /* SRAM (GPCS0, 0x19000000, 1MB) */
write_mmcr_long(SC520_PAR10, 0x4e03d910); /* SRAM (GPCS3, 0x19100000, 1MB) */
write_mmcr_long(SC520_PAR11, 0x50018100); /* DP-RAM (GPCS4, 0x18100000, 4kB) */
write_mmcr_long(SC520_PAR12, 0x54020000); /* CFLASH1 (0x200000000, 4kB) */
write_mmcr_long(SC520_PAR13, 0x5c020001); /* CFLASH2 (0x200010000, 4kB) */
/* write_mmcr_long(SC520_PAR14, 0x8bfff800); */ /* BOOTCS at 0x18000000 */
/* write_mmcr_long(SC520_PAR15, 0x38201000); */ /* LEDs etc (GPCS6, 0x1000, 20 Bytes */
/* Disable Watchdog */
write_mmcr_word(0x0cb0, 0x3333);
write_mmcr_word(0x0cb0, 0xcccc);
write_mmcr_word(0x0cb0, 0x0000);
/* Chip Select Configuration */
write_mmcr_word(SC520_BOOTCSCTL, 0x0033);
write_mmcr_word(SC520_ROMCS1CTL, 0x0615);
write_mmcr_word(SC520_ROMCS2CTL, 0x0615);
write_mmcr_byte(SC520_ADDDECCTL, 0x02);
write_mmcr_byte(SC520_UART1CTL, 0x07);
write_mmcr_byte(SC520_SYSARBCTL,0x06);
write_mmcr_word(SC520_SYSARBMENB, 0x0003);
/* Crystal is 33.000MHz */
gd->bus_clk = 33000000;
return 0;
}
int dram_init(void)
{
init_sc520_dram();
return 0;
}
void show_boot_progress(int val)
{
uchar led_mask;
led_mask = 0x00;
if (val < 0)
led_mask |= LED_ERR_BITMASK;
led_mask |= (uchar)(val & 0x001f);
outb(led_mask, LED_LATCH_ADDRESS);
}
int last_stage_init(void)
{
int minor;
int major;
major = minor = 0;
printf("Serck Controls eNET\n");
return 0;
}
ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
{
if (banknum == 0) { /* non-CFI boot flash */
info->portwidth = FLASH_CFI_8BIT;
info->chipwidth = FLASH_CFI_BY8;
info->interface = FLASH_CFI_X8;
return 1;
} else
return 0;
}