u-boot/board/gateworks/gw_ventana/gsc.h

65 lines
1.6 KiB
C
Raw Normal View History

/*
* Copyright (C) 2013 Gateworks Corporation
*
* Author: Tim Harvey <tharvey@gateworks.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASSEMBLY__
/* i2c slave addresses */
#define GSC_SC_ADDR 0x20
#define GSC_RTC_ADDR 0x68
#define GSC_HWMON_ADDR 0x29
#define GSC_EEPROM_ADDR 0x51
/* System Controller registers */
enum {
GSC_SC_CTRL0 = 0x00,
GSC_SC_CTRL1 = 0x01,
GSC_SC_STATUS = 0x0a,
GSC_SC_FWVER = 0x0e,
};
/* System Controller Control1 bits */
enum {
GSC_SC_CTRL1_WDDIS = 7, /* 1 = disable watchdog */
};
/* System Controller Interrupt bits */
enum {
GSC_SC_IRQ_PB = 0, /* Pushbutton switch */
GSC_SC_IRQ_SECURE = 1, /* Secure Key erase operation complete */
GSC_SC_IRQ_EEPROM_WP = 2, /* EEPROM write violation */
GSC_SC_IRQ_GPIO = 4, /* GPIO change */
GSC_SC_IRQ_TAMPER = 5, /* Tamper detect */
GSC_SC_IRQ_WATCHDOG = 6, /* Watchdog trip */
GSC_SC_IRQ_PBLONG = 7, /* Pushbutton long hold */
};
/* Hardware Monitor registers */
enum {
GSC_HWMON_TEMP = 0x00,
GSC_HWMON_VIN = 0x02,
GSC_HWMON_VDD_3P3 = 0x05,
GSC_HWMON_VBATT = 0x08,
GSC_HWMON_VDD_5P0 = 0x0b,
GSC_HWMON_VDD_CORE = 0x0e,
GSC_HWMON_VDD_HIGH = 0x14,
GSC_HWMON_VDD_DDR = 0x17,
GSC_HWMON_VDD_SOC = 0x11,
GSC_HWMON_VDD_1P8 = 0x1d,
GSC_HWMON_VDD_2P5 = 0x23,
GSC_HWMON_VDD_1P0 = 0x20,
};
/*
* I2C transactions to the GSC are done via these functions which
* perform retries in the case of a busy GSC NAK'ing the transaction
*/
int gsc_i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len);
int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len);
#endif