u-boot/include/configs/odroid_xu3.h

129 lines
3.5 KiB
C
Raw Normal View History

/*
* Copyright (C) 2013 Samsung Electronics
* Hyungwon Hwang <human.hwang@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_ODROID_XU3_H
#define __CONFIG_ODROID_XU3_H
#include "exynos5420-common.h"
#include <configs/exynos5-common.h>
#undef CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_BOARD_COMMON
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_TEXT_BASE 0x43E00000
/* select serial console configuration */
#define CONFIG_SERIAL2 /* use SERIAL 2 */
#define TZPC_BASE_OFFSET 0x10000
#define CONFIG_NR_DRAM_BANKS 8
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
/* Reserve the last 22 MiB for the secure firmware */
#define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL)
#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE
#define CONFIG_ENV_IS_IN_MMC
#undef CONFIG_ENV_SIZE
#undef CONFIG_ENV_OFFSET
#define CONFIG_ENV_SIZE (SZ_1K * 16)
#define CONFIG_ENV_OFFSET (SZ_1K * 3136) /* ~3 MiB offset */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
/* USB */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_EXYNOS
/* DFU */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
#define DFU_DEFAULT_POLL_TIMEOUT 300
#define DFU_MANIFEST_POLL_TIMEOUT 25000
/* THOR */
#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
#define CONFIG_USB_FUNCTION_THOR
#define CONFIG_CMD_THOR_DOWNLOAD
/* UMS */
#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
#define CONFIG_USB_FUNCTION_MASS_STORAGE
/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */
#undef CONFIG_EXYNOS_TMU
#undef CONFIG_TMU_CMD_DTT
#define CONFIG_DFU_ALT_SYSTEM \
"uImage fat 0 1;" \
"zImage fat 0 1;" \
"Image.itb fat 0 1;" \
"uInitrd fat 0 1;" \
"boot.scr fat 0 1;" \
"boot.cmd fat 0 1;" \
"exynos5422-odroidxu3.dtb fat 0 1;" \
exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4. This commit adds additional file with implementation of board detection code for Odroid-XU3/XU4. The detection depends on compatible found in fdt: - "samsung,exynos5" - uses Exynos5 generic code - "samsung,odroidxu3" - try detect XU3 revision There are few revisions of Odroid XU3/XU4, each can be detected by checking the value of channel 9 of built-in ADC: Rev ADC Board 0.1 0 XU3 0.1 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT 0.3 1280 XU4 0.1 The detection code depends on the ADC+10% value. Implementation of functions: - set_board_type() - read ADC and set type - get_board_rev() - returns board revision: 1..3 - get_board_type() - returns board type string Additional functions with return values of bool: - board_is_generic() - true if found compatible "samsung,exynos5" but not "samsung,odroidxu3" - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3" and one of XU3 revision. - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3" and XU4 revision. After I2C controller init, the get_board_type() can check if the XU3 board is a "Lite" variant, by probing chip 0x40 on I2C0 (INA231 - exists only on non-lite). This is useful for setting fdt file name at misc_init_r(). Enabled configs: - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - CONFIG_ODROID_REV_AIN - CONFIG_REVISION_TAG - CONFIG_BOARD_TYPES Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-27 12:08:05 +00:00
"exynos5422-odroidxu3-lite.dtb fat 0 1;" \
"exynos5422-odroidxu4.dtb fat 0 1;" \
"boot part 0 1;" \
"root part 0 2\0"
#define CONFIG_DFU_ALT_BOOT_EMMC \
"u-boot raw 0x3e 0x800 mmcpart 1;" \
"bl1 raw 0x0 0x1e mmcpart 1;" \
"bl2 raw 0x1e 0x1d mmcpart 1;" \
"tzsw raw 0x83e 0x200 mmcpart 1;" \
"params.bin raw 0x1880 0x20\0"
#define CONFIG_DFU_ALT_BOOT_SD \
"u-boot raw 0x3f 0x800;" \
"bl1 raw 0x1 0x1e;" \
"bl2 raw 0x1f 0x1d;" \
"tzsw raw 0x83f 0x200;" \
"params.bin raw 0x1880 0x20\0"
/* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
#define CONFIG_MISC_COMMON
exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4. This commit adds additional file with implementation of board detection code for Odroid-XU3/XU4. The detection depends on compatible found in fdt: - "samsung,exynos5" - uses Exynos5 generic code - "samsung,odroidxu3" - try detect XU3 revision There are few revisions of Odroid XU3/XU4, each can be detected by checking the value of channel 9 of built-in ADC: Rev ADC Board 0.1 0 XU3 0.1 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT 0.3 1280 XU4 0.1 The detection code depends on the ADC+10% value. Implementation of functions: - set_board_type() - read ADC and set type - get_board_rev() - returns board revision: 1..3 - get_board_type() - returns board type string Additional functions with return values of bool: - board_is_generic() - true if found compatible "samsung,exynos5" but not "samsung,odroidxu3" - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3" and one of XU3 revision. - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3" and XU4 revision. After I2C controller init, the get_board_type() can check if the XU3 board is a "Lite" variant, by probing chip 0x40 on I2C0 (INA231 - exists only on non-lite). This is useful for setting fdt file name at misc_init_r(). Enabled configs: - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - CONFIG_ODROID_REV_AIN - CONFIG_REVISION_TAG - CONFIG_BOARD_TYPES Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-27 12:08:05 +00:00
#define CONFIG_MISC_INIT_R
#define CONFIG_SET_DFU_ALT_INFO
#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4. This commit adds additional file with implementation of board detection code for Odroid-XU3/XU4. The detection depends on compatible found in fdt: - "samsung,exynos5" - uses Exynos5 generic code - "samsung,odroidxu3" - try detect XU3 revision There are few revisions of Odroid XU3/XU4, each can be detected by checking the value of channel 9 of built-in ADC: Rev ADC Board 0.1 0 XU3 0.1 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT 0.3 1280 XU4 0.1 The detection code depends on the ADC+10% value. Implementation of functions: - set_board_type() - read ADC and set type - get_board_rev() - returns board revision: 1..3 - get_board_type() - returns board type string Additional functions with return values of bool: - board_is_generic() - true if found compatible "samsung,exynos5" but not "samsung,odroidxu3" - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3" and one of XU3 revision. - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3" and XU4 revision. After I2C controller init, the get_board_type() can check if the XU3 board is a "Lite" variant, by probing chip 0x40 on I2C0 (INA231 - exists only on non-lite). This is useful for setting fdt file name at misc_init_r(). Enabled configs: - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - CONFIG_ODROID_REV_AIN - CONFIG_REVISION_TAG - CONFIG_BOARD_TYPES Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-27 12:08:05 +00:00
/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_ODROID_REV_AIN 9
#define CONFIG_REVISION_TAG
#define CONFIG_BOARD_TYPES
#undef CONFIG_SYS_BOARD
#define CONFIG_SYS_BOARD "odroid"
/* Define new extra env settings, including DFU settings */
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS \
EXYNOS_FDTFILE_SETTING \
MEM_LAYOUT_ENV_SETTINGS \
BOOTENV \
"bootdelay=0\0" \
"rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
"fdtfile=exynos5422-odroidxu3.dtb\0" \
"boardname=odroidxu3\0" \
"mmcbootdev=0\0" \
"mmcrootdev=0\0" \
"mmcbootpart=1\0" \
"mmcrootpart=2\0" \
"dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \
"dfu_alt_info=Autoset by THOR/DFU command run.\0"
#endif /* __CONFIG_H */