u-boot/include/configs/ADNPESC1.h

690 lines
24 KiB
C
Raw Normal View History

/*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/***********************************************************************
* Include the whole NIOS CPU configuration.
*
* !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
*
***********************************************************************/
#if defined(CONFIG_NIOS_BASE_32)
#include <configs/ADNPESC1_base_32.h>
#else
#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
#endif
/*------------------------------------------------------------------------
* BOARD/CPU -- TOP-LEVEL
*----------------------------------------------------------------------*/
#define CONFIG_NIOS 1 /* NIOS-32 core */
#define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */
#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
/*------------------------------------------------------------------------
* BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
#else
#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
#endif
#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
#else
#undef CONFIG_SYS_SRAM_BASE
#undef CONFIG_SYS_SRAM_SIZE
#endif
#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
/*------------------------------------------------------------------------
* MEMORY ORGANIZATION - For the most part, you can put things pretty
* much anywhere. This is pretty flexible for Nios. So here we make some
* arbitrary choices & assume that the monitor is placed at the end of
* a memory resource (so you must make sure TEXT_BASE is chosen
* appropriately -- this is very important if you plan to move your
* memory to another place as configured at this time !!!).
*
* -The heap is placed below the monitor.
* -Global data is placed below the heap.
* -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
/*------------------------------------------------------------------------
* FLASH (AM29LV065D)
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size */
#else
#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* ENVIRONMENT
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
/* Mem addr of environment */
#if defined(CONFIG_NIOS_BASE_32)
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
#else
#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
#endif
#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
#else
#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */
#endif
/*------------------------------------------------------------------------
* NIOS APPLICATION CODE BASE AREA
*----------------------------------------------------------------------*/
#if ((CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) == 0x1050000)
#define CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100"
#define CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "0x1050000"
#define CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "0x105000c"
#define CONFIG_SYS_ADNPESC1_NIOS_APPL_END "0x11fffff"
#define CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "0x1200000"
#define CONFIG_SYS_ADNPESC1_FILESYSTEM_END "0x17fffff"
#else
#error *** CONFIG_SYS_ERROR: missing right appl.code base configuration, expand your config.h
#endif
#define CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "Nios"
/*------------------------------------------------------------------------
* BOOT ENVIRONMENT
*----------------------------------------------------------------------*/
#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF "sled boot off; "
#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK "sled red blink; "
#else
#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF
#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK
#endif
#define CONFIG_BOOTDELAY 5
#define CONFIG_BOOTCOMMAND \
"if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \
"then " \
"wd off; " \
CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF \
"go $appl_entry_addr; " \
"else " \
CONFIG_SYS_ADNPESC1_SLED_RED_BLINK \
"echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\
"echo *** invalid application at $appl_entry_addr; " \
"echo *** stop bootup...; " \
"fi"
/*------------------------------------------------------------------------
* EXTRA ENVIRONMENT
*----------------------------------------------------------------------*/
#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON "sled yellow on; "
#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF "sled yellow off; "
#else
#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON
#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"update_allowed=0\0" \
"update_load_addr=" CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "\0" \
"appl_entry_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "\0" \
"appl_end_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_END "\0" \
"appl_ident_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "\0" \
"appl_ident_str=" CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "\0" \
"appl_name=ADNPESC1/base32/linux.bin\0" \
"appl_update=" \
"if itest.b $update_allowed != 0; " \
"then " \
CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
"tftp $update_load_addr $appl_name; " \
"protect off $appl_entry_addr $appl_end_addr; " \
"era $appl_entry_addr $appl_end_addr; " \
"cp.b $update_load_addr $appl_entry_addr $filesize; "\
CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \
"else " \
"echo *** update not allowed (update_allowed=$update_allowed); "\
"fi\0" \
"fs_base_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "\0" \
"fs_end_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_END "\0" \
"fs_name=ADNPESC1/base32/romfs.img\0" \
"fs_update=" \
"if itest.b $update_allowed != 0; " \
"then " \
CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
"tftp $update_load_addr $fs_name; " \
"protect off $fs_base_addr $fs_end_addr; " \
"era $fs_base_addr $fs_end_addr; " \
"cp.b $update_load_addr $fs_base_addr $filesize; "\
CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \
"else " \
"echo *** update not allowed (update_allowed=$update_allowed); "\
"fi\0" \
"uboot_name=ADNPESC1/base32/u-boot.bin\0" \
"uboot_loadnrun=" \
"if ping $serverip; " \
"then " \
CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
"tftp $update_load_addr $uboot_name; " \
"wd off; " \
"go $update_load_addr; " \
"else " \
"echo *** missing connection to $serverip; " \
"echo *** check your network and try again...; "\
"fi\0"
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
#else
#undef CONFIG_SYS_NIOS_FIXEDBAUD
#define CONFIG_BAUDRATE 115200
#endif
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
* so an avalon bus timer is required.
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
#endif
#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
#if (CONFIG_SYS_HZ <= 1000)
#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
#endif
#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
#endif
#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
#endif
#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
#if (CONFIG_SYS_HZ <= 1000)
#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
#endif
#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
#endif
#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* WATCHDOG (or better MAX823 supervisory circuite access)
*----------------------------------------------------------------------*/
#define CONFIG_HW_WATCHDOG 1 /* board specific WD */
#ifdef CONFIG_HW_WATCHDOG
/* MAX823 supervisor -- watchdog enable port at: */
#if (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 0)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 1)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 2)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 3)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 4)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 5)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 6)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 7)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 8)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 9)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
#endif
/* MAX823 supervisor -- watchdog trigger port at: */
#if (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 0)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 1)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 2)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 3)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 4)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 5)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 6)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 7)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 8)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 9)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
#endif
#if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */
#define CONFIG_HW_WDENA_BIT 0 /* WD enable @ Bit 0 */
#define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */
#define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/
#else
#error *** CONFIG_SYS_ERROR: missing watchdog bit configuration, expand your config.h
#endif
#endif /* CONFIG_HW_WATCHDOG */
/*------------------------------------------------------------------------
* SERIAL PERIPHAREL INTERFACE
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
#define CONFIG_NIOS_SPI 1 /* SPI support active */
#define CONFIG_SYS_NIOS_SPIBASE CONFIG_SYS_NIOS_CPU_SPI0
#define CONFIG_SYS_NIOS_SPIBITS CONFIG_SYS_NIOS_CPU_SPI0_BITS
#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */
#define CONFIG_SYS_SPI_RTC_DEVID 0 /* as 1st SPI device */
#else
#undef CONFIG_NIOS_SPI /* NO SPI support */
#endif
/*------------------------------------------------------------------------
* Ethernet -- needs work!
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
#define CONFIG_SMC_USE_32_BIT 1
#else /* no */
#undef CONFIG_SMC_USE_32_BIT
#endif
#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
/********************************************/
/* !!! CS8900 is __not__ tested on NIOS !!! */
/********************************************/
#define CONFIG_NET_MULTI
#define CONFIG_CS8900 /* Using CS8900 */
#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
#undef CONFIG_CS8900_BUS16
#define CONFIG_CS8900_BUS32
#else /* no */
#define CONFIG_CS8900_BUS16
#undef CONFIG_CS8900_BUS32
#endif
#else
#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
#endif
#define CONFIG_ETHADDR 02:80:ae:20:60:6f
#define CONFIG_NETMASK 255.255.255.248
#define CONFIG_IPADDR 192.168.161.84
#define CONFIG_SERVERIP 192.168.161.85
#else
#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
#endif
/*------------------------------------------------------------------------
* STATUS LEDs
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO0
#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO0_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
#if (CONFIG_SYS_NIOS_CPU_PIO0_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO1
#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO1_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
#if (CONFIG_SYS_NIOS_CPU_PIO1_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
#else
#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
#endif
#define CONFIG_STATUS_LED 1 /* enable status led driver */
#define STATUS_LED_BIT (1 << 0) /* LED[0] */
#define STATUS_LED_STATE STATUS_LED_BLINKING
#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
#define STATUS_LED_BOOT 0 /* boot LED */
#if (STATUS_LED_BITS > 1)
#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
#define STATUS_LED_STATE1 STATUS_LED_OFF
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10) /* ca. 5 Hz */
#define STATUS_LED_RED 1 /* fail LED */
#endif
#if (STATUS_LED_BITS > 2)
#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
#define STATUS_LED_STATE2 STATUS_LED_OFF
#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
#define STATUS_LED_YELLOW 2 /* info LED */
#endif
#if (STATUS_LED_BITS > 3)
#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
#define STATUS_LED_STATE3 STATUS_LED_OFF
#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
#define STATUS_LED_GREEN 3 /* info LED */
#endif
#define STATUS_LED_PAR 1 /* makes status_led.h happy */
#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
/*------------------------------------------------------------------------
* Diagnostics / Power On Self Tests
*----------------------------------------------------------------------*/
#define CONFIG_POST CONFIG_SYS_POST_RTC
#define CONFIG_SYS_NIOS_POST_WORD_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_BSP
#define CONFIG_CMD_CDP
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_DISPLAY
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PING
#define CONFIG_CMD_PORTIO
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_REISER
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_XIMG
#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
#define CONFIG_CMD_DATE
#define CONFIG_CMD_SPI
#endif
/*------------------------------------------------------------------------
* KGDB
*----------------------------------------------------------------------*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 9600
#endif
/*------------------------------------------------------------------------
* MISC
*----------------------------------------------------------------------*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser
undef to save memory */
#define CONFIG_SYS_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 64 /* max number of command args*/
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "[]> "
#endif
/* Default load address */
#if (CONFIG_SYS_SRAM_SIZE != 0)
/* default in SRAM */
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE
#elif (CONFIG_SYS_SDRAM_SIZE != 0)
/* default in SDRAM */
#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
#if 1
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
#else
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x400000)
#endif
#else
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
#endif
#else
#undef CONFIG_SYS_LOAD_ADDR /* force error break */
#endif
/* MEM test area */
#if (CONFIG_SYS_SDRAM_SIZE != 0)
/* SDRAM begin to stack area (1MB stack) */
#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
#if 0
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
#else
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400000)
#endif
#else
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#endif
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
#else
#undef CONFIG_SYS_MEMTEST_START /* force error break */
#undef CONFIG_SYS_MEMTEST_END
#endif
/*
* JFFS2 partitions
*
*/
/* No command line, one static partition */
#undef CONFIG_CMD_MTDPARTS
#define CONFIG_JFFS2_DEV "nor"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
/* mtdparts command line support */
/*
#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT ""
#define MTDPARTS_DEFAULT ""
*/
#endif /* __CONFIG_H */