u-boot/drivers/pci/pci_ixp.c

368 lines
10 KiB
C
Raw Normal View History

/*
* IXP PCI Init
*
* (C) Copyright 2011
* Michael Schwingen, michael@schwingen.org
* (C) Copyright 2004 eslab.whut.edu.cn
* Yue Hu(huyue_whut@yahoo.com.cn), Ligong Xue(lgxue@hotmail.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <pci.h>
#include <asm/arch/ixp425.h>
#include <asm/arch/ixp425pci.h>
DECLARE_GLOBAL_DATA_PTR;
static void non_prefetch_read(unsigned int addr, unsigned int cmd,
unsigned int *data);
static void non_prefetch_write(unsigned int addr, unsigned int cmd,
unsigned int data);
/*define the sub vendor and subsystem to be used */
#define IXP425_PCI_SUB_VENDOR_SYSTEM 0x00000000
#define PCI_MEMORY_BUS 0x00000000
#define PCI_MEMORY_PHY 0x00000000
#define PCI_MEMORY_SIZE 0x04000000
#define PCI_MEM_BUS 0x48000000
#define PCI_MEM_PHY 0x00000000
#define PCI_MEM_SIZE 0x04000000
#define PCI_IO_BUS 0x00000000
#define PCI_IO_PHY 0x00000000
#define PCI_IO_SIZE 0x00010000
/* build address value for config sycle */
static unsigned int pci_config_addr(pci_dev_t bdf, unsigned int reg)
{
unsigned int bus = PCI_BUS(bdf);
unsigned int dev = PCI_DEV(bdf);
unsigned int func = PCI_FUNC(bdf);
unsigned int addr;
if (bus) { /* secondary bus, use type 1 config cycle */
addr = bdf | (reg & ~3) | 1;
} else {
/*
primary bus, type 0 config cycle. address bits 31:28
specify the device 10:8 specify the function
*/
addr = BIT((31 - dev)) | (func << 8) | (reg & ~3);
}
return addr;
}
static int pci_config_status(void)
{
unsigned int regval;
regval = readl(PCI_CSR_BASE + PCI_ISR_OFFSET);
if ((regval & PCI_ISR_PFE) == 0)
return OK;
/* no device present, make sure that the master abort bit is reset */
writel(PCI_ISR_PFE, PCI_CSR_BASE + PCI_ISR_OFFSET);
return ERROR;
}
static int pci_ixp_hose_read_config_dword(struct pci_controller *hose,
pci_dev_t bdf, int where, unsigned int *val)
{
unsigned int retval;
unsigned int addr;
int stat;
debug("pci_ixp_hose_read_config_dword: bdf %x, reg %x", bdf, where);
/*Set the address to be read */
addr = pci_config_addr(bdf, where);
non_prefetch_read(addr, NP_CMD_CONFIGREAD, &retval);
*val = retval;
stat = pci_config_status();
if (stat < 0)
*val = -1;
debug("-> val %x, status %x\n", *val, stat);
return stat;
}
static int pci_ixp_hose_read_config_word(struct pci_controller *hose,
pci_dev_t bdf, int where, unsigned short *val)
{
unsigned int n;
unsigned int retval;
unsigned int addr;
unsigned int byteEnables;
int stat;
debug("pci_ixp_hose_read_config_word: bdf %x, reg %x", bdf, where);
n = where % 4;
/*byte enables are 4 bits active low, the position of each
bit maps to the byte that it enables */
byteEnables =
(~(BIT(n) | BIT((n + 1)))) &
IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
byteEnables = byteEnables << PCI_NP_CBE_BESL;
/*Set the address to be read */
addr = pci_config_addr(bdf, where);
non_prefetch_read(addr, byteEnables | NP_CMD_CONFIGREAD, &retval);
/*Pick out the word we are interested in */
*val = retval >> (8 * n);
stat = pci_config_status();
if (stat < 0)
*val = -1;
debug("-> val %x, status %x\n", *val, stat);
return stat;
}
static int pci_ixp_hose_read_config_byte(struct pci_controller *hose,
pci_dev_t bdf, int where, unsigned char *val)
{
unsigned int retval;
unsigned int n;
unsigned int byteEnables;
unsigned int addr;
int stat;
debug("pci_ixp_hose_read_config_byte: bdf %x, reg %x", bdf, where);
n = where % 4;
/*byte enables are 4 bits, active low, the position of each
bit maps to the byte that it enables */
byteEnables = (~BIT(n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
byteEnables = byteEnables << PCI_NP_CBE_BESL;
/*Set the address to be read */
addr = pci_config_addr(bdf, where);
non_prefetch_read(addr, byteEnables | NP_CMD_CONFIGREAD, &retval);
/*Pick out the byte we are interested in */
*val = retval >> (8 * n);
stat = pci_config_status();
if (stat < 0)
*val = -1;
debug("-> val %x, status %x\n", *val, stat);
return stat;
}
static int pci_ixp_hose_write_config_byte(struct pci_controller *hose,
pci_dev_t bdf, int where, unsigned char val)
{
unsigned int addr;
unsigned int byteEnables;
unsigned int n;
unsigned int ldata;
int stat;
debug("pci_ixp_hose_write_config_byte: bdf %x, reg %x, val %x",
bdf, where, val);
n = where % 4;
/*byte enables are 4 bits active low, the position of each
bit maps to the byte that it enables */
byteEnables = (~BIT(n)) & IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
byteEnables = byteEnables << PCI_NP_CBE_BESL;
ldata = val << (8 * n);
/*Set the address to be written */
addr = pci_config_addr(bdf, where);
non_prefetch_write(addr, byteEnables | NP_CMD_CONFIGWRITE, ldata);
stat = pci_config_status();
debug("-> status %x\n", stat);
return stat;
}
static int pci_ixp_hose_write_config_word(struct pci_controller *hose,
pci_dev_t bdf, int where, unsigned short val)
{
unsigned int addr;
unsigned int byteEnables;
unsigned int n;
unsigned int ldata;
int stat;
debug("pci_ixp_hose_write_config_word: bdf %x, reg %x, val %x",
bdf, where, val);
n = where % 4;
/*byte enables are 4 bits active low, the position of each
bit maps to the byte that it enables */
byteEnables =
(~(BIT(n) | BIT((n + 1)))) &
IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK;
byteEnables = byteEnables << PCI_NP_CBE_BESL;
ldata = val << (8 * n);
/*Set the address to be written */
addr = pci_config_addr(bdf, where);
non_prefetch_write(addr, byteEnables | NP_CMD_CONFIGWRITE, ldata);
stat = pci_config_status();
debug("-> status %x\n", stat);
return stat;
}
static int pci_ixp_hose_write_config_dword(struct pci_controller *hose,
pci_dev_t bdf, int where, unsigned int val)
{
unsigned int addr;
int stat;
debug("pci_ixp_hose_write_config_dword: bdf %x, reg %x, val %x",
bdf, where, val);
/*Set the address to be written */
addr = pci_config_addr(bdf, where);
non_prefetch_write(addr, NP_CMD_CONFIGWRITE, val);
stat = pci_config_status();
debug("-> status %x\n", stat);
return stat;
}
static void non_prefetch_read(unsigned int addr,
unsigned int cmd, unsigned int *data)
{
writel(addr, PCI_CSR_BASE + PCI_NP_AD_OFFSET);
/*set up and execute the read */
writel(cmd, PCI_CSR_BASE + PCI_NP_CBE_OFFSET);
/*The result of the read is now in np_rdata */
*data = readl(PCI_CSR_BASE + PCI_NP_RDATA_OFFSET);
return;
}
static void non_prefetch_write(unsigned int addr,
unsigned int cmd, unsigned int data)
{
writel(addr, PCI_CSR_BASE + PCI_NP_AD_OFFSET);
/*set up the write */
writel(cmd, PCI_CSR_BASE + PCI_NP_CBE_OFFSET);
/*Execute the write by writing to NP_WDATA */
writel(data, PCI_CSR_BASE + PCI_NP_WDATA_OFFSET);
return;
}
static void crp_write(unsigned int offset, unsigned int data)
{
/*
* The CRP address register bit 16 indicates that we want to do a
* write
*/
writel(PCI_CRP_WRITE | offset, PCI_CSR_BASE + PCI_CRP_AD_CBE_OFFSET);
writel(data, PCI_CSR_BASE + PCI_CRP_WDATA_OFFSET);
}
void pci_ixp_init(struct pci_controller *hose)
{
unsigned int csr;
/*
* Specify that the AHB bus is operating in big endian mode. Set up
* byte lane swapping between little-endian PCI and the big-endian
* AHB bus
*/
#ifdef __ARMEB__
csr = PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
#else
csr = PCI_CSR_ABE;
#endif
writel(csr, PCI_CSR_BASE + PCI_CSR_OFFSET);
writel(0, PCI_CSR_BASE + PCI_INTEN_OFFSET);
/*
* We configure the PCI inbound memory windows to be
* 1:1 mapped to SDRAM
*/
crp_write(PCI_CFG_BASE_ADDRESS_0, 0x00000000);
crp_write(PCI_CFG_BASE_ADDRESS_1, 0x01000000);
crp_write(PCI_CFG_BASE_ADDRESS_2, 0x02000000);
crp_write(PCI_CFG_BASE_ADDRESS_3, 0x03000000);
/*
* Enable CSR window at 64 MiB to allow PCI masters
* to continue prefetching past 64 MiB boundary.
*/
crp_write(PCI_CFG_BASE_ADDRESS_4, 0x04000000);
/*
* Enable the IO window to be way up high, at 0xfffffc00
*/
crp_write(PCI_CFG_BASE_ADDRESS_5, 0xfffffc01);
/*Setup PCI-AHB and AHB-PCI address mappings */
writel(0x00010203, PCI_CSR_BASE + PCI_AHBMEMBASE_OFFSET);
writel(0x00000000, PCI_CSR_BASE + PCI_AHBIOBASE_OFFSET);
writel(0x48494a4b, PCI_CSR_BASE + PCI_PCIMEMBASE_OFFSET);
crp_write(PCI_CFG_SUB_VENDOR_ID, IXP425_PCI_SUB_VENDOR_SYSTEM);
crp_write(PCI_CFG_COMMAND, PCI_CFG_CMD_MAE | PCI_CFG_CMD_BME);
udelay(1000);
/* clear error bits in status register */
writel(PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE,
PCI_CSR_BASE + PCI_ISR_OFFSET);
/*
* Set Initialize Complete in PCI Control Register: allow IXP4XX to
* respond to PCI configuration cycles.
*/
csr |= PCI_CSR_IC;
writel(csr, PCI_CSR_BASE + PCI_CSR_OFFSET);
hose->first_busno = 0;
hose->last_busno = 0;
/* System memory space */
pci_set_region(hose->regions + 0,
PCI_MEMORY_BUS,
PCI_MEMORY_PHY, PCI_MEMORY_SIZE, PCI_REGION_SYS_MEMORY);
/* PCI memory space */
pci_set_region(hose->regions + 1,
PCI_MEM_BUS,
PCI_MEM_PHY, PCI_MEM_SIZE, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region(hose->regions + 2,
PCI_IO_BUS, PCI_IO_PHY, PCI_IO_SIZE, PCI_REGION_IO);
hose->region_count = 3;
pci_set_ops(hose,
pci_ixp_hose_read_config_byte,
pci_ixp_hose_read_config_word,
pci_ixp_hose_read_config_dword,
pci_ixp_hose_write_config_byte,
pci_ixp_hose_write_config_word,
pci_ixp_hose_write_config_dword);
pci_register_hose(hose);
hose->last_busno = pci_hose_scan(hose);
}