u-boot/drivers/video/anx9804.c

187 lines
5.6 KiB
C
Raw Normal View History

/*
* (C) 2015 Hans de Goede <hdegoede@redhat.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Support for the ANX9804 bridge chip, which can take pixel data coming
* from a parallel LCD interface and translate it on the flight into a DP
* interface for driving eDP TFT displays.
*/
#include <common.h>
#include <i2c.h>
#include "anx9804.h"
/* Registers at i2c address 0x38 */
#define ANX9804_HDCP_CONTROL_0_REG 0x01
#define ANX9804_SYS_CTRL2_REG 0x81
#define ANX9804_SYS_CTRL2_CHA_STA 0x04
#define ANX9804_SYS_CTRL3_REG 0x82
#define ANX9804_SYS_CTRL3_VALID_CTRL BIT(0)
#define ANX9804_SYS_CTRL3_F_VALID BIT(1)
#define ANX9804_SYS_CTRL3_HPD_CTRL BIT(4)
#define ANX9804_SYS_CTRL3_F_HPD BIT(5)
#define ANX9804_LINK_BW_SET_REG 0xa0
#define ANX9804_LANE_COUNT_SET_REG 0xa1
#define ANX9804_TRAINING_PTN_SET_REG 0xa2
#define ANX9804_TRAINING_LANE0_SET_REG 0xa3
#define ANX9804_TRAINING_LANE1_SET_REG 0xa4
#define ANX9804_TRAINING_LANE2_SET_REG 0xa5
#define ANX9804_TRAINING_LANE3_SET_REG 0xa6
#define ANX9804_LINK_TRAINING_CTRL_REG 0xa8
#define ANX9804_LINK_TRAINING_CTRL_EN BIT(0)
#define ANX9804_LINK_DEBUG_REG 0xb8
#define ANX9804_PLL_CTRL_REG 0xc7
#define ANX9804_ANALOG_POWER_DOWN_REG 0xc8
/* Registers at i2c address 0x39 */
#define ANX9804_DEV_IDH_REG 0x03
#define ANX9804_POWERD_CTRL_REG 0x05
#define ANX9804_POWERD_AUDIO BIT(4)
#define ANX9804_RST_CTRL_REG 0x06
#define ANX9804_RST_CTRL2_REG 0x07
#define ANX9804_RST_CTRL2_AUX BIT(2)
#define ANX9804_RST_CTRL2_AC_MODE BIT(6)
#define ANX9804_VID_CTRL1_REG 0x08
#define ANX9804_VID_CTRL1_VID_EN BIT(7)
#define ANX9804_VID_CTRL1_EDGE BIT(0)
#define ANX9804_VID_CTRL2_REG 0x09
#define ANX9804_ANALOG_DEBUG_REG1 0xdc
#define ANX9804_ANALOG_DEBUG_REG3 0xde
#define ANX9804_PLL_FILTER_CTRL1 0xdf
#define ANX9804_PLL_FILTER_CTRL3 0xe1
#define ANX9804_PLL_FILTER_CTRL 0xe2
#define ANX9804_PLL_CTRL3 0xe6
/**
* anx9804_init() - Init anx9804 parallel lcd to edp bridge chip
*
* This function will init an anx9804 parallel lcd to dp bridge chip
* using the passed in parameters.
*
* @i2c_bus: Number of the i2c bus to which the anx9804 is connected.
* @lanes: Number of displayport lanes to use
* @data_rate: Register value for the bandwidth reg 0x06: 1.62G, 0x0a: 2.7G
* @bpp: Bits per pixel, must be 18 or 24
*/
void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
{
unsigned int orig_i2c_bus = i2c_get_bus_num();
u8 c, colordepth;
int i;
i2c_set_bus_num(i2c_bus);
if (bpp == 18)
colordepth = 0x00; /* 6 bit */
else
colordepth = 0x10; /* 8 bit */
/* Reset */
i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 1);
mdelay(100);
i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 0);
/* Write 0 to the powerdown reg (powerup everything) */
i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, 0);
c = i2c_reg_read(0x39, ANX9804_DEV_IDH_REG);
if (c != 0x98) {
printf("Error anx9804 chipid mismatch\n");
i2c_set_bus_num(orig_i2c_bus);
return;
}
for (i = 0; i < 100; i++) {
c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
i2c_reg_write(0x38, ANX9804_SYS_CTRL2_REG, c);
c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0)
break;
mdelay(5);
}
if (i == 100)
printf("Error anx9804 clock is not stable\n");
i2c_reg_write(0x39, ANX9804_VID_CTRL2_REG, colordepth);
/* Set a bunch of analog related register values */
i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07);
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19);
i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9);
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG3, 0x99);
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL1, 0x7b);
i2c_reg_write(0x38, ANX9804_LINK_DEBUG_REG, 0x30);
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL, 0x06);
/* Force HPD */
i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL);
/* Power up and configure lanes */
i2c_reg_write(0x38, ANX9804_ANALOG_POWER_DOWN_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE0_SET_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE1_SET_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE2_SET_REG, 0x00);
i2c_reg_write(0x38, ANX9804_TRAINING_LANE3_SET_REG, 0x00);
/* Reset AUX CH */
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
ANX9804_RST_CTRL2_AC_MODE | ANX9804_RST_CTRL2_AUX);
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
ANX9804_RST_CTRL2_AC_MODE);
/* Powerdown audio and some other unused bits */
i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO);
i2c_reg_write(0x38, ANX9804_HDCP_CONTROL_0_REG, 0x00);
i2c_reg_write(0x38, 0xa7, 0x00);
/* Set data-rate / lanes */
i2c_reg_write(0x38, ANX9804_LINK_BW_SET_REG, data_rate);
i2c_reg_write(0x38, ANX9804_LANE_COUNT_SET_REG, lanes);
/* Link training */
i2c_reg_write(0x38, ANX9804_LINK_TRAINING_CTRL_REG,
ANX9804_LINK_TRAINING_CTRL_EN);
mdelay(5);
for (i = 0; i < 100; i++) {
c = i2c_reg_read(0x38, ANX9804_LINK_TRAINING_CTRL_REG);
if ((c & 0x01) == 0)
break;
mdelay(5);
}
if(i == 100) {
printf("Error anx9804 link training timeout\n");
i2c_set_bus_num(orig_i2c_bus);
return;
}
/* Enable */
i2c_reg_write(0x39, ANX9804_VID_CTRL1_REG,
ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE);
/* Force stream valid */
i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL |
ANX9804_SYS_CTRL3_F_VALID | ANX9804_SYS_CTRL3_VALID_CTRL);
i2c_set_bus_num(orig_i2c_bus);
}