2005-04-05 16:26:47 +00:00
|
|
|
/*
|
|
|
|
* Copyright 2005 DENX Software Engineering
|
|
|
|
* Wolfgang Denk <wd@denx.de>
|
|
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
|
|
* (C) Copyright 2002,2003 Motorola,Inc.
|
|
|
|
* Xianghua Xiao <X.Xiao@motorola.com>
|
|
|
|
*
|
|
|
|
* See file CREDITS for list of people who contributed to this
|
|
|
|
* project.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TQM8560 board configuration file
|
|
|
|
*
|
|
|
|
* Make sure you change the MAC address and other network params first,
|
|
|
|
* search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __CONFIG_H
|
|
|
|
#define __CONFIG_H
|
|
|
|
|
|
|
|
/* High Level Configuration Options */
|
|
|
|
#define CONFIG_BOOKE 1 /* BOOKE */
|
|
|
|
#define CONFIG_E500 1 /* BOOKE e500 family */
|
|
|
|
#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
|
|
|
|
#define CONFIG_MPC8560 1 /* MPC8560 specific */
|
|
|
|
#define CONFIG_TQM8560 1 /* TQM8560 board specific */
|
|
|
|
|
|
|
|
#undef CONFIG_PCI
|
|
|
|
#define CONFIG_TSEC_ENET /* tsec ethernet support */
|
|
|
|
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
|
|
|
#define CONFIG_DDR_DLL /* possible DLL fix needed */
|
|
|
|
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* sysclk for MPC85xx
|
|
|
|
*
|
|
|
|
* Two valid values are:
|
|
|
|
* 33000000
|
|
|
|
* 66000000
|
|
|
|
*
|
|
|
|
* Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
|
|
|
|
* is likely the desired value here, so that is now the default.
|
|
|
|
* The board, however, can run at 66MHz. In any event, this value
|
|
|
|
* must match the settings of some switches. Details can be found
|
|
|
|
* in the README.mpc85xxads.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef CONFIG_SYS_CLK_FREQ
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 33000000
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* These can be toggled for performance analysis, otherwise use default.
|
|
|
|
*/
|
|
|
|
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
|
|
|
#define CONFIG_BTB /* toggle branch predition */
|
|
|
|
#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
|
|
|
|
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
|
|
|
|
|
|
|
#undef CFG_DRAM_TEST /* memory test, takes time */
|
|
|
|
#define CFG_MEMTEST_START 0x00000000 /* memtest region */
|
|
|
|
#define CFG_MEMTEST_END 0x10000000
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Base addresses -- Note these are effective addresses where the
|
|
|
|
* actual resources get mapped (not physical addresses)
|
|
|
|
*/
|
|
|
|
#define CFG_CCSRBAR_DEFAULT 0xFF700000 /* CCSRBAR Default */
|
|
|
|
#define CFG_CCSRBAR 0xE0000000 /* relocated CCSRBAR */
|
|
|
|
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* DDR Setup
|
|
|
|
*/
|
|
|
|
#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
|
|
|
|
#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
|
|
|
|
|
|
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
|
|
/*
|
|
|
|
* Determine DDR configuration from I2C interface.
|
|
|
|
*/
|
|
|
|
#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
|
|
|
|
|
|
|
|
#else
|
|
|
|
/*
|
|
|
|
* Manually set up DDR parameters
|
|
|
|
*/
|
|
|
|
#define CFG_SDRAM_SIZE 512 /* DDR is 256MB */
|
|
|
|
#define CFG_DDR_CS0_BNDS 0x0000001f /* 0-256MB */
|
|
|
|
#define CFG_DDR_CS0_CONFIG 0x80000102
|
|
|
|
#define CFG_DDR_TIMING_1 0x47445331
|
|
|
|
#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
|
|
|
|
#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
|
|
|
|
#define CFG_DDR_MODE 0x40020062 /* DLL,normal,seq,4/2.5 */
|
|
|
|
#define CFG_DDR_INTERVAL 0x05160100 /* autocharge,no open page */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Flash on the Local Bus
|
|
|
|
*/
|
|
|
|
#define CFG_LBC_FLASH_BASE 0xfe000000 /* Localbus SDRAM */
|
|
|
|
#define CFG_LBC_FLASH_SIZE 32 /* LBC SDRAM is 32MB */
|
|
|
|
|
|
|
|
#define CFG_FLASH_BASE CFG_LBC_FLASH_BASE /* start of FLASH 32M */
|
|
|
|
#define CFG_BR0_PRELIM 0xfe001801 /* port size 32bit */
|
|
|
|
|
|
|
|
#define CFG_OR0_PRELIM 0xfe000040 /* 32MB Flash */
|
|
|
|
#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
|
|
|
|
#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
|
|
|
|
#undef CFG_FLASH_CHECKSUM
|
|
|
|
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
|
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
|
|
|
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
|
|
|
|
|
|
|
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
|
|
|
#define CFG_RAMBOOT
|
|
|
|
#else
|
|
|
|
#undef CFG_RAMBOOT
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define CFG_FLASH_CFI_DRIVER
|
|
|
|
#define CFG_FLASH_CFI
|
|
|
|
#define CFG_FLASH_EMPTY_INFO
|
|
|
|
|
|
|
|
#define CFG_LBC_LCRR 0x00030008 /* LB clock ratio reg */
|
|
|
|
#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
|
|
|
|
#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
|
|
|
|
#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* LSDMR masks
|
|
|
|
*/
|
|
|
|
#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
|
|
|
|
#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
|
|
|
|
#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
|
|
|
|
#define CFG_LBC_LSDMR_RFCR5 (3 << (31 - 16))
|
|
|
|
#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
|
|
|
|
#define CFG_LBC_LSDMR_PRETOACT3 (3 << (31 - 19))
|
|
|
|
#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
|
|
|
|
#define CFG_LBC_LSDMR_ACTTORW3 (3 << (31 - 22))
|
|
|
|
#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
|
|
|
|
#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
|
|
|
|
#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
|
|
|
|
#define CFG_LBC_LSDMR_WRC2 (2 << (31 - 27))
|
|
|
|
#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
|
|
|
|
#define CFG_LBC_LSDMR_BUFCMD (1 << (31 - 29))
|
|
|
|
#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
|
|
|
|
|
|
|
|
#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
|
|
|
|
#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
|
|
|
|
#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
|
|
|
|
#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
|
|
|
|
#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
|
|
|
|
#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
|
|
|
|
#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
|
|
|
|
#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
|
|
|
|
|
|
|
|
#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_BSMA1516 \
|
|
|
|
| CFG_LBC_LSDMR_RFCR5 \
|
|
|
|
| CFG_LBC_LSDMR_PRETOACT3 \
|
|
|
|
| CFG_LBC_LSDMR_ACTTORW3 \
|
|
|
|
| CFG_LBC_LSDMR_BL8 \
|
|
|
|
| CFG_LBC_LSDMR_WRC2 \
|
|
|
|
| CFG_LBC_LSDMR_CL3 \
|
|
|
|
| CFG_LBC_LSDMR_RFEN \
|
|
|
|
)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* SDRAM Controller configuration sequence.
|
|
|
|
*/
|
|
|
|
#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
|
|
|
|
| CFG_LBC_LSDMR_OP_PCHALL)
|
|
|
|
#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
|
|
|
|
| CFG_LBC_LSDMR_OP_ARFRSH)
|
|
|
|
#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
|
|
|
|
| CFG_LBC_LSDMR_OP_ARFRSH)
|
|
|
|
#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
|
|
|
|
| CFG_LBC_LSDMR_OP_MRW)
|
|
|
|
#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
|
|
|
|
| CFG_LBC_LSDMR_OP_NORMAL)
|
|
|
|
|
|
|
|
#define CONFIG_L1_INIT_RAM
|
|
|
|
#define CFG_INIT_RAM_LOCK 1
|
|
|
|
#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
|
|
|
|
#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
|
|
|
|
|
|
|
|
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
|
|
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
|
|
|
|
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
|
|
|
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
|
|
|
|
|
|
|
/* Serial Port */
|
|
|
|
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
|
|
|
|
#undef CONFIG_CONS_NONE /* define if console on something else */
|
|
|
|
#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
|
|
|
|
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
|
|
|
|
#define CFG_BAUDRATE_TABLE \
|
|
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
|
|
|
|
|
|
|
|
/* Use the HUSH parser */
|
|
|
|
#define CFG_HUSH_PARSER
|
|
|
|
#ifdef CFG_HUSH_PARSER
|
|
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* I2C */
|
|
|
|
#define CONFIG_HARD_I2C /* I2C with hardware support*/
|
|
|
|
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
|
|
|
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
|
|
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
|
|
|
|
|
|
|
|
/* RapidIO MMU */
|
|
|
|
#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
|
|
|
|
#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
|
|
|
|
#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* General PCI
|
|
|
|
* Addresses are mapped 1-1.
|
|
|
|
*/
|
|
|
|
#define CFG_PCI1_MEM_BASE 0x80000000
|
|
|
|
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
|
|
|
|
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
|
|
|
|
#define CFG_PCI1_IO_BASE 0xe2000000
|
|
|
|
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
|
|
|
|
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
|
|
|
|
|
|
|
|
#if defined(CONFIG_PCI)
|
|
|
|
|
|
|
|
#define CONFIG_NET_MULTI
|
|
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
|
|
|
|
|
|
#undef CONFIG_EEPRO100
|
|
|
|
#undef CONFIG_TULIP
|
|
|
|
|
|
|
|
#if !defined(CONFIG_PCI_PNP)
|
|
|
|
#define PCI_ENET0_IOADDR 0xe0000000
|
|
|
|
#define PCI_ENET0_MEMADDR 0xe0000000
|
|
|
|
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
|
|
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
|
|
|
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
|
|
|
|
|
|
#ifndef CONFIG_NET_MULTI
|
|
|
|
#define CONFIG_NET_MULTI 1
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define CONFIG_MII 1 /* MII PHY management */
|
|
|
|
#define CONFIG_MPC85XX_TSEC2 1
|
|
|
|
#define TSEC2_PHY_ADDR 1
|
|
|
|
#define TSEC2_PHYIDX 0
|
|
|
|
|
2005-04-21 21:10:22 +00:00
|
|
|
#endif /* CONFIG_TSEC_ENET */
|
|
|
|
|
2005-04-05 16:26:47 +00:00
|
|
|
#define CONFIG_ETHER_ON_FCC
|
|
|
|
#define CONFIG_ETHER_ON_FCC3
|
|
|
|
#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
|
2005-04-21 21:10:22 +00:00
|
|
|
#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
|
2005-04-05 16:26:47 +00:00
|
|
|
#define CFG_CPMFCR_RAMTYPE 0
|
2005-04-21 21:10:22 +00:00
|
|
|
#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
|
2005-04-05 16:26:47 +00:00
|
|
|
|
|
|
|
#define CONFIG_ETHPRIME "ENET1"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Environment
|
|
|
|
*/
|
|
|
|
#ifndef CFG_RAMBOOT
|
|
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x20000)
|
|
|
|
#define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
|
|
|
|
#define CFG_ENV_SIZE 0x2000
|
|
|
|
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET-CFG_ENV_SECT_SIZE)
|
|
|
|
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
|
|
|
#else
|
|
|
|
#define CFG_NO_FLASH 1 /* Flash is not usable now */
|
|
|
|
#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
|
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
|
|
|
|
#define CFG_ENV_SIZE 0x2000
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
|
|
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
|
|
|
|
#if defined(CFG_RAMBOOT)
|
|
|
|
# define CONFIG_CMD_PRIV (CONFIG_CMD_DFL & ~(CFG_CMD_ENV | CFG_CMD_LOADS))
|
|
|
|
#else
|
|
|
|
# define CONFIG_CMD_PRIV (CONFIG_CMD_DFL | \
|
|
|
|
CFG_CMD_DHCP | \
|
|
|
|
CFG_CMD_NFS | \
|
|
|
|
CFG_CMD_SNTP )
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if defined(CONFIG_PCI)
|
|
|
|
# define ADD_PCI_CMD (CFG_CMD_PCI)
|
|
|
|
#else
|
|
|
|
# define ADD_PCI_CMD 0
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define CONFIG_COMMANDS (CONFIG_CMD_PRIV | \
|
|
|
|
ADD_PCI_CMD | \
|
|
|
|
CFG_CMD_I2C | \
|
|
|
|
CFG_CMD_PING )
|
|
|
|
#include <cmd_confdefs.h>
|
|
|
|
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Miscellaneous configurable options
|
|
|
|
*/
|
|
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
|
|
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
|
|
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
|
|
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
|
|
#else
|
|
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* For booting Linux, the board info and command line data
|
|
|
|
* have to be in the first 8 MB of memory, since this is
|
|
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
|
|
*/
|
|
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
|
|
|
|
|
|
|
/* Cache Configuration */
|
|
|
|
#define CFG_DCACHE_SIZE 32768
|
|
|
|
#define CFG_CACHELINE_SIZE 32
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
|
|
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Internal Definitions
|
|
|
|
*
|
|
|
|
* Boot Flags
|
|
|
|
*/
|
|
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
|
|
|
|
|
|
|
|
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
|
|
|
|
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
|
|
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
|
|
|
|
"echo"
|
|
|
|
|
|
|
|
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
|
|
|
|
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
|
|
"netdev=eth0\0" \
|
|
|
|
"consdev=ttyS0\0" \
|
|
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
|
|
"nfsroot=$serverip:$rootpath\0" \
|
|
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
|
|
"addip=setenv bootargs $bootargs " \
|
|
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask" \
|
|
|
|
":$hostname:$netdev:off panic=1\0" \
|
|
|
|
"addcons=setenv bootargs $bootargs " \
|
|
|
|
"console=$consdev,$baudrate\0" \
|
|
|
|
"flash_nfs=run nfsargs addip addcons;" \
|
|
|
|
"bootm $kernel_addr\0" \
|
|
|
|
"flash_self=run ramargs addip addcons;" \
|
|
|
|
"bootm $kernel_addr $ramdisk_addr\0" \
|
|
|
|
"net_nfs=tftp $loadaddr $bootfile;" \
|
|
|
|
"run nfsargs addip addcons;bootm\0" \
|
|
|
|
"rootpath=/opt/eldk/ppc_85xx\0" \
|
|
|
|
"bootfile=/tftpboot/tqm8560/uImage\0" \
|
|
|
|
"kernel_addr=FE000000\0" \
|
|
|
|
"ramdisk_addr=FE100000\0" \
|
|
|
|
""
|
|
|
|
#define CONFIG_BOOTCOMMAND "run flash_self"
|
|
|
|
|
|
|
|
#endif /* __CONFIG_H */
|