u-boot/Makefile

1124 lines
38 KiB
Makefile
Raw Normal View History

2002-11-02 23:17:16 +00:00
#
# (C) Copyright 2000-2011
2002-11-02 23:17:16 +00:00
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
2002-11-02 23:17:16 +00:00
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2002-11-02 23:17:16 +00:00
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
VERSION = 2011
PATCHLEVEL = 06
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
endif
TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
VERSION_FILE = $(obj)include/version_autogenerated.h
2002-11-02 23:17:16 +00:00
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/x86/ \
2002-11-02 23:17:16 +00:00
-e s/sun4u/sparc64/ \
-e s/arm.*/arm/ \
-e s/sa110/arm/ \
-e s/ppc64/powerpc/ \
-e s/ppc/powerpc/ \
-e s/macppc/powerpc/\
-e s/sh.*/sh/)
2002-11-02 23:17:16 +00:00
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
2002-11-02 23:17:16 +00:00
sed -e 's/\(cygwin\).*/cygwin/')
# Set shell to bash if possible, otherwise fall back to sh
SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi; fi)
export HOSTARCH HOSTOS SHELL
2002-11-02 23:17:16 +00:00
# Deal with colliding definitions from tcsh etc.
VENDOR=
#########################################################################
# Allow for silent builds
ifeq (,$(findstring s,$(MAKEFLAGS)))
XECHO = echo
else
XECHO = :
endif
2002-11-02 23:17:16 +00:00
#########################################################################
#
# U-boot build supports producing a object files to the separate external
# directory. Two use cases are supported:
#
# 1) Add O= to the make command line
# 'make O=/tmp/build all'
#
# 2) Set environement variable BUILD_DIR to point to the desired location
# 'export BUILD_DIR=/tmp/build'
# 'make'
#
# The second approach can also be used with a MAKEALL script
# 'export BUILD_DIR=/tmp/build'
# './MAKEALL'
#
# Command line 'O=' setting overrides BUILD_DIR environent variable.
#
# When none of the above methods is used the local build is performed and
# the object files are placed in the source directory.
#
ifdef O
ifeq ("$(origin O)", "command line")
BUILD_DIR := $(O)
endif
endif
ifneq ($(BUILD_DIR),)
saved-output := $(BUILD_DIR)
# Attempt to create a output directory.
$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
# Verify if it was successful.
BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
endif # ifneq ($(BUILD_DIR),)
OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
SPLTREE := $(OBJTREE)/spl
SRCTREE := $(CURDIR)
TOPDIR := $(SRCTREE)
LNDIR := $(OBJTREE)
export TOPDIR SRCTREE OBJTREE SPLTREE
MKCONFIG := $(SRCTREE)/mkconfig
export MKCONFIG
2002-11-02 23:17:16 +00:00
ifneq ($(OBJTREE),$(SRCTREE))
2006-11-30 17:02:20 +00:00
REMOTE_BUILD := 1
export REMOTE_BUILD
endif
# $(obj) and (src) are defined in config.mk but here in main Makefile
# we also need them before config.mk is included which is the case for
# some targets like unconfig, clean, clobber, distclean, etc.
ifneq ($(OBJTREE),$(SRCTREE))
obj := $(OBJTREE)/
src := $(SRCTREE)/
else
obj :=
src :=
endif
export obj src
# Make sure CDPATH settings don't interfere
unexport CDPATH
2002-11-02 23:17:16 +00:00
#########################################################################
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
examples/standalone \
examples/api
.PHONY : $(SUBDIRS) $(VERSION_FILE)
ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
2002-11-02 23:17:16 +00:00
# Include autoconf.mk before config.mk so that the config options are available
# to all top level build files. We need the dummy all: target to prevent the
# dependency target in autoconf.mk.dep from being the default.
all:
sinclude $(obj)include/autoconf.mk.dep
sinclude $(obj)include/autoconf.mk
2002-11-02 23:17:16 +00:00
# load ARCH, BOARD, and CPU configuration
include $(obj)include/config.mk
export ARCH CPU BOARD VENDOR SOC
# set default to nothing for native builds
ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE ?=
endif
2002-11-02 23:17:16 +00:00
# load other configuration
include $(TOPDIR)/config.mk
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
# that (or fail if absent). Otherwise, search for a linker script in a
# standard location.
ifndef LDSCRIPT
#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
ifdef CONFIG_SYS_LDSCRIPT
# need to strip off double quotes
LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
endif
endif
ifndef LDSCRIPT
ifeq ($(CONFIG_NAND_U_BOOT),y)
LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
endif
endif
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
$(error could not find linker script)
endif
endif
2002-11-02 23:17:16 +00:00
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
OBJS = $(CPUDIR)/start.o
ifeq ($(CPU),x86)
OBJS += $(CPUDIR)/start16.o
OBJS += $(CPUDIR)/resetvec.o
endif
2002-11-02 23:17:16 +00:00
ifeq ($(CPU),ppc4xx)
OBJS += $(CPUDIR)/resetvec.o
2002-11-02 23:17:16 +00:00
endif
ifeq ($(CPU),mpc85xx)
OBJS += $(CPUDIR)/resetvec.o
endif
2002-11-02 23:17:16 +00:00
OBJS := $(addprefix $(obj),$(OBJS))
LIBS = lib/libgeneric.o
LIBS += lib/lzma/liblzma.o
LIBS += lib/lzo/liblzo.o
LIBS += lib/zlib/libz.o
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
"board/$(VENDOR)/common/lib$(VENDOR).o"; fi)
LIBS += $(CPUDIR)/lib$(CPU).o
ifdef SOC
LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).o
endif
ifeq ($(CPU),ixp)
LIBS += arch/arm/cpu/ixp/npe/libnpe.o
endif
LIBS += arch/$(ARCH)/lib/lib$(ARCH).o
LIBS += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \
fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \
fs/ubifs/libubifs.o
LIBS += net/libnet.o
LIBS += disk/libdisk.o
LIBS += drivers/bios_emulator/libatibiosemu.o
LIBS += drivers/block/libblock.o
LIBS += drivers/dma/libdma.o
LIBS += drivers/fpga/libfpga.o
LIBS += drivers/gpio/libgpio.o
LIBS += drivers/hwmon/libhwmon.o
LIBS += drivers/i2c/libi2c.o
LIBS += drivers/input/libinput.o
LIBS += drivers/misc/libmisc.o
LIBS += drivers/mmc/libmmc.o
LIBS += drivers/mtd/libmtd.o
LIBS += drivers/mtd/nand/libnand.o
LIBS += drivers/mtd/onenand/libonenand.o
LIBS += drivers/mtd/ubi/libubi.o
LIBS += drivers/mtd/spi/libspi_flash.o
LIBS += drivers/net/libnet.o
LIBS += drivers/net/phy/libphy.o
LIBS += drivers/pci/libpci.o
LIBS += drivers/pcmcia/libpcmcia.o
LIBS += drivers/power/libpower.o
LIBS += drivers/spi/libspi.o
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/libqe.o
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/libqe.o
LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
ifeq ($(CPU),mpc86xx)
LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
LIBS += drivers/rtc/librtc.o
LIBS += drivers/serial/libserial.o
LIBS += drivers/twserial/libtws.o
LIBS += drivers/usb/eth/libusb_eth.o
LIBS += drivers/usb/gadget/libusb_gadget.o
LIBS += drivers/usb/host/libusb_host.o
LIBS += drivers/usb/musb/libusb_musb.o
LIBS += drivers/usb/phy/libusb_phy.o
LIBS += drivers/video/libvideo.o
LIBS += drivers/watchdog/libwatchdog.o
LIBS += common/libcommon.o
LIBS += lib/libfdt/libfdt.o
LIBS += api/libapi.o
LIBS += post/libpost.o
ifeq ($(SOC),omap3)
LIBS += $(CPUDIR)/omap-common/libomap-common.o
endif
ifeq ($(SOC),omap4)
LIBS += $(CPUDIR)/omap-common/libomap-common.o
endif
ifeq ($(SOC),s5pc1xx)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
ifeq ($(SOC),s5pc2xx)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
LIBS := $(addprefix $(obj),$(sort $(LIBS)))
.PHONY : $(LIBS) $(TIMESTAMP_FILE)
LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o
LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
# Add GCC lib
ifdef USE_PRIVATE_LIBGCC
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/libgcc.o
else
PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
endif
else
PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
endif
PLATFORM_LIBS += $(PLATFORM_LIBGCC)
export PLATFORM_LIBS
# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
-include $(TOPDIR)/include/u-boot/u-boot.lds.h \
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
__OBJS := $(subst $(obj),,$(OBJS))
__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
#########################################################################
2002-11-02 23:17:16 +00:00
#########################################################################
ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
BOARD_SIZE_CHECK = \
@actual=`wc -c $@ | awk '{print $$1}'`; \
limit=$(CONFIG_BOARD_SIZE_LIMIT); \
if test $$actual -gt $$limit; then \
echo "$@ exceeds file size limit:"; \
echo " limit: $$limit bytes"; \
echo " actual: $$actual bytes"; \
echo " excess: $$((actual - limit)) bytes"; \
exit 1; \
fi
else
BOARD_SIZE_CHECK =
endif
# Always append ALL so that arch config.mk's can add custom ones
ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
ALL-$(CONFIG_MMC_U_BOOT) += $(obj)mmc_spl/u-boot-mmc-spl.bin
ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
all: $(ALL-y)
2002-11-02 23:17:16 +00:00
$(obj)u-boot.hex: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
$(obj)u-boot.srec: $(obj)u-boot
$(OBJCOPY) -O srec $< $@
2002-11-02 23:17:16 +00:00
$(obj)u-boot.bin: $(obj)u-boot
2002-11-02 23:17:16 +00:00
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(BOARD_SIZE_CHECK)
2002-11-02 23:17:16 +00:00
$(obj)u-boot.ldr: $(obj)u-boot
$(CREATE_LDR_ENV)
$(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
$(BOARD_SIZE_CHECK)
$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
$(obj)u-boot.img: $(obj)u-boot.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(CONFIG_SYS_TEXT_BASE) -e 0 \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
$(obj)u-boot.imx: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \
-e $(CONFIG_SYS_TEXT_BASE) -d $< $@
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
$(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)tools/ubsha1 $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot
2002-11-02 23:17:16 +00:00
$(OBJDUMP) -d $< > $@
GEN_UBOOT = \
UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
$(obj)u-boot: depend \
$(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
$(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
smap=`$(call SYSTEM_MAP,u-boot) | \
awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
-c common/system_map.c -o $(obj)common/system_map.o
$(GEN_UBOOT) $(obj)common/system_map.o
endif
2002-11-02 23:17:16 +00:00
$(OBJS): depend
$(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@))
$(LIBS): depend $(SUBDIRS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(LIBBOARD): depend $(LIBS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(SUBDIRS): depend
$(MAKE) -C $@ all
2002-11-02 23:17:16 +00:00
$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
$(obj)u-boot.lds: $(LDSCRIPT)
$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
$(obj)u-boot-nand.bin: nand_spl $(obj)u-boot.bin
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
onenand_ipl: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
$(obj)u-boot-onenand.bin: onenand_ipl $(obj)u-boot.bin
cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
mmc_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend
$(MAKE) -C mmc_spl/board/$(BOARDDIR) all
$(obj)mmc_spl/u-boot-mmc-spl.bin: mmc_spl
$(obj)spl/u-boot-spl.bin: depend
$(MAKE) -C spl all
$(TIMESTAMP_FILE):
@LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
@LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@
updater:
$(MAKE) -C tools/updater all
# Explicitly make _depend in subdirs containing multiple targets to prevent
# parallel sub-makes creating .depend files simultaneously.
depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \
$(obj)include/autoconf.mk \
$(obj)include/generated/generic-asm-offsets.h
for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \
$(MAKE) -C $$dir _depend ; done
2002-11-02 23:17:16 +00:00
TAG_SUBDIRS = $(SUBDIRS)
TAG_SUBDIRS += $(dir $(__LIBS))
TAG_SUBDIRS += include
FIND := find
FINDFLAGS := -L
tags ctags:
ctags -w -o $(obj)ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
2002-11-02 23:17:16 +00:00
etags:
etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
cscope:
$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
cscope.files
cscope -b -q -k
2002-11-02 23:17:16 +00:00
SYSTEM_MAP = \
$(NM) $1 | \
2002-11-02 23:17:16 +00:00
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
LC_ALL=C sort
$(obj)System.map: $(obj)u-boot
@$(call SYSTEM_MAP,$<) > $(obj)System.map
2002-11-02 23:17:16 +00:00
#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
@$(XECHO) Generating $@ ; \
set -e ; \
: Generate the dependancies ; \
$(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
-MQ $(obj)include/autoconf.mk include/common.h > $@
$(obj)include/autoconf.mk: $(obj)include/config.h
@$(XECHO) Generating $@ ; \
set -e ; \
: Extract the config macros ; \
$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
mv $@.tmp $@
$(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \
$(obj)lib/asm-offsets.s
@$(XECHO) Generating $@
tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@
$(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \
$(src)lib/asm-offsets.c
@mkdir -p $(obj)lib
$(CC) -DDO_DEPS_ONLY \
$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
-o $@ $(src)lib/asm-offsets.c -c -S
2002-11-02 23:17:16 +00:00
#########################################################################
else # !config.mk
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
$(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) \
updater depend dep tags ctags etags cscope $(obj)System.map:
2002-11-02 23:17:16 +00:00
@echo "System not configured - see README" >&2
@ exit 1
tools: $(VERSION_FILE)
$(MAKE) -C $@ all
endif # config.mk
2002-11-02 23:17:16 +00:00
$(VERSION_FILE):
@mkdir -p $(dir $(VERSION_FILE))
@( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
printf '#define PLAIN_VERSION "%s%s"\n' \
"$(U_BOOT_VERSION)" "$${localvers}" ; \
printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' \
"$(U_BOOT_VERSION)" "$${localvers}" ; \
) > $@.tmp
@( printf '#define CC_VERSION_STRING "%s"\n' \
'$(shell $(CC) --version | head -n 1)' )>> $@.tmp
@( printf '#define LD_VERSION_STRING "%s"\n' \
'$(shell $(LD) -v | head -n 1)' )>> $@.tmp
@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
easylogo env gdb:
$(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION}
gdbtools: gdb
tools-all: easylogo env gdb $(VERSION_FILE)
$(MAKE) -C tools HOST_TOOLS_ALL=y
.PHONY : CHANGELOG
CHANGELOG:
git log --no-merges U-Boot-1_1_5.. | \
unexpand -a | sed -e 's/\s\s*$$//' > $@
include/license.h: tools/bin2header COPYING
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
2002-11-02 23:17:16 +00:00
#########################################################################
unconfig:
@rm -f $(obj)include/config.h $(obj)include/config.mk \
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
2002-11-02 23:17:16 +00:00
%_config:: unconfig
@$(MKCONFIG) -A $(@:_config=)
sinclude $(obj).boards.depend
$(obj).boards.depend: boards.cfg
awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@
#
# Functions to generate common board directory names
#
lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
#########################################################################
## Coldfire
#########################################################################
astro_mcf5373l_config \
astro_mcf5373l_RAM_config : unconfig
@$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro
M52277EVB_config \
M52277EVB_spansion_config \
M52277EVB_stmicro_config : unconfig
@case "$@" in \
M52277EVB_config) FLASH=SPANSION;; \
M52277EVB_spansion_config) FLASH=SPANSION;; \
M52277EVB_stmicro_config) FLASH=STMICRO;; \
esac; \
if [ "$${FLASH}" = "SPANSION" ] ; then \
echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "CONFIG_SYS_TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
fi
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
M5235EVB_config \
M5235EVB_Flash16_config \
M5235EVB_Flash32_config: unconfig
@case "$@" in \
M5235EVB_config) FLASH=16;; \
M5235EVB_Flash16_config) FLASH=16;; \
M5235EVB_Flash32_config) FLASH=32;; \
esac; \
if [ "$${FLASH}" != "16" ] ; then \
echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \
echo "CONFIG_SYS_TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
else \
echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
fi
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
2005-12-12 15:06:05 +00:00
cobra5272_config : unconfig
@$(MKCONFIG) $@ m68k mcf52x2 cobra5272
2005-12-12 15:06:05 +00:00
2006-06-10 17:27:47 +00:00
EB+MCF-EV123_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2006-06-10 17:27:47 +00:00
EB+MCF-EV123_internal_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "CONFIG_SYS_TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2006-06-10 17:27:47 +00:00
M5329AFEE_config \
M5329BFEE_config : unconfig
@case "$@" in \
M5329AFEE_config) NAND=0;; \
M5329BFEE_config) NAND=16;; \
esac; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale
M5373EVB_config : unconfig
@case "$@" in \
M5373EVB_config) NAND=16;; \
esac; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
M54451EVB_config \
M54451EVB_stmicro_config : unconfig
@case "$@" in \
M54451EVB_config) FLASH=NOR;; \
M54451EVB_stmicro_config) FLASH=STMICRO;; \
esac; \
if [ "$${FLASH}" = "NOR" ] ; then \
echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "CONFIG_SYS_TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
fi; \
echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale
M54455EVB_config \
M54455EVB_atmel_config \
M54455EVB_intel_config \
M54455EVB_a33_config \
M54455EVB_a66_config \
M54455EVB_i33_config \
M54455EVB_i66_config \
M54455EVB_stm33_config : unconfig
@case "$@" in \
M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \
M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \
M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \
M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \
M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \
esac; \
if [ "$${FLASH}" = "INTEL" ] ; then \
echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "ATMEL" ] ; then \
echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "CONFIG_SYS_TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
echo "CONFIG_SYS_TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
fi; \
echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale
M5475AFE_config \
M5475BFE_config \
M5475CFE_config \
M5475DFE_config \
M5475EFE_config \
M5475FFE_config \
M5475GFE_config : unconfig
@case "$@" in \
M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
esac; \
echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale
M5485AFE_config \
M5485BFE_config \
M5485CFE_config \
M5485DFE_config \
M5485EFE_config \
M5485FFE_config \
M5485GFE_config \
M5485HFE_config : unconfig
@case "$@" in \
M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
esac; \
echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
fi
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale
2002-11-02 23:17:16 +00:00
#========================================================================
# ARM
#========================================================================
#########################################################################
## ARM926EJ-S Systems
#########################################################################
at91sam9261ek_nandflash_config \
at91sam9261ek_dataflash_cs0_config \
at91sam9261ek_dataflash_cs3_config \
at91sam9261ek_config \
at91sam9g10ek_nandflash_config \
at91sam9g10ek_dataflash_cs0_config \
at91sam9g10ek_dataflash_cs3_config \
at91sam9g10ek_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring 9g10,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
fi;
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
at91sam9263ek_norflash_config \
at91sam9263ek_norflash_boot_config \
at91sam9263ek_nandflash_config \
at91sam9263ek_dataflash_config \
at91sam9263ek_dataflash_cs0_config \
at91sam9263ek_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
elif [ "$(findstring norflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring norflash_boot,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \
fi;
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
at91sam9rlek_nandflash_config \
at91sam9rlek_dataflash_config \
at91sam9rlek_dataflash_cs0_config \
at91sam9rlek_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
fi;
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
at91sam9m10g45ek_nandflash_config \
at91sam9m10g45ek_dataflash_config \
at91sam9m10g45ek_dataflash_cs0_config \
at91sam9m10g45ek_config \
at91sam9g45ekes_nandflash_config \
at91sam9g45ekes_dataflash_config \
at91sam9g45ekes_dataflash_cs0_config \
at91sam9g45ekes_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring 9m10,$@)" ] ; then \
echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \
fi;
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
pm9g45_config : unconfig
@mkdir -p $(obj)include
@$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
SBC35_A9G20_NANDFLASH_config \
SBC35_A9G20_EEPROM_config \
SBC35_A9G20_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
TNY_A9G20_NANDFLASH_config \
TNY_A9G20_EEPROM_config \
TNY_A9G20_config \
TNY_A9260_NANDFLASH_config \
TNY_A9260_EEPROM_config \
TNY_A9260_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
ap_config \
ap966_config \
ap922_config \
ap922_XA10_config \
ap7_config \
2006-11-30 17:02:20 +00:00
ap720t_config \
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
@board/armltd/integrator/split_by_variant.sh ap $@
integratorcp_config \
cp_config \
cp920t_config \
cp926ejs_config \
cp946es_config \
cp1136_config \
cp966_config \
cp922_config \
cp922_XA10_config \
cp1026_config: unconfig
@board/armltd/integrator/split_by_variant.sh cp $@
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
omap1610inn_cs_autoboot_config \
omap1610h2_config \
omap1610h2_cs0boot_config \
omap1610h2_cs3boot_config \
omap1610h2_cs_autoboot_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
fi;
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
fi;
@$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap
spear300_config \
spear310_config \
spear320_config : unconfig
@$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear
spear600_config : unconfig
@$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear
SX1_stdout_serial_config \
SX1_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
else \
echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
fi;
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ SX1 arm arm925t sx1
tx25_config : unconfig
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
edb9301_config \
edb9302_config \
edb9302a_config \
edb9307_config \
edb9307a_config \
edb9312_config \
edb9315_config \
edb9315a_config: unconfig
@$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx
#########################################################################
# ARM supplied Versatile development boards
#########################################################################
versatile_config \
versatileab_config \
versatilepb_config : unconfig
@board/armltd/versatile/split_by_variant.sh $@
2002-11-02 23:17:16 +00:00
#########################################################################
## XScale Systems
2002-11-02 23:17:16 +00:00
#########################################################################
pdnb3_config \
scpu_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring scpu_,$@)" ] ; then \
echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
fi
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
#########################################################################
## ARM1136 Systems
#########################################################################
apollon_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) $@ arm arm1136 apollon - omap24xx
imx31_phycore_eet_config \
imx31_phycore_config : unconfig
@mkdir -p $(obj)include
@if [ -n "$(findstring _eet_,$@)" ]; then \
echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \
fi
@$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31
mx31pdk_config \
mx31pdk_nand_config : unconfig
@mkdir -p $(obj)include
@if [ -n "$(findstring _nand_,$@)" ]; then \
echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \
else \
echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \
fi
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31
#########################################################################
## ARM1176 Systems
#########################################################################
smdk6400_noUSB_config \
smdk6400_config : unconfig
@mkdir -p $(obj)include $(obj)board/samsung/smdk6400
@mkdir -p $(obj)nand_spl/board/samsung/smdk6400
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
Fix printing of make targets, simplify Makefile Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-27 21:18:33 +00:00
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \
echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
else \
echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
fi
@$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
#########################################################################
#########################################################################
2002-11-02 23:17:16 +00:00
clean:
@rm -f $(obj)examples/standalone/82559_eeprom \
$(obj)examples/standalone/atmel_df_pow2 \
$(obj)examples/standalone/eepro100_eeprom \
$(obj)examples/standalone/hello_world \
$(obj)examples/standalone/interrupt \
$(obj)examples/standalone/mem_to_mem_idma2intr \
$(obj)examples/standalone/sched \
$(obj)examples/standalone/smc911{11,x}_eeprom \
$(obj)examples/standalone/test_burst \
$(obj)examples/standalone/timer
@rm -f $(obj)examples/api/demo{,.bin}
@rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \
$(obj)tools/env/{fw_printenv,fw_setenv} \
$(obj)tools/envcrc \
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
$(obj)tools/mkimage $(obj)tools/mpc86x_clk \
$(obj)tools/ncb $(obj)tools/ubsha1
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/voiceblue/eeprom \
$(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
$(obj)u-boot.lds \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)lib/asm-offsets.s
@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
@rm -f $(obj)mmc_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,u-boot-spl.bin,u-boot-mmc-spl.bin}
@rm -f $(ONENAND_BIN)
@rm -f $(obj)onenand_ipl/u-boot.lds
@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
@find $(OBJTREE) -type f \
2002-11-02 23:17:16 +00:00
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
2002-11-02 23:17:16 +00:00
| xargs rm -f
clobber: clean
@find $(OBJTREE) -type f \( -name '*.depend' \
-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
-print0 \
| xargs -0 rm -f
@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
@rm -f $(obj)u-boot.kwb
@rm -f $(obj)u-boot.imx
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@rm -fr $(obj)include/generated
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)mmc_spl ] || find $(obj)mmc_spl -name "*" -type l -print | xargs rm -f
mrproper \
distclean: clobber unconfig
ifneq ($(OBJTREE),$(SRCTREE))
rm -rf $(obj)*
endif
2002-11-02 23:17:16 +00:00
backup:
F=`basename $(TOPDIR)` ; cd .. ; \
gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
2002-11-02 23:17:16 +00:00
#########################################################################