u-boot/board/samsung/smdk6400/lowlevel_init.S

324 lines
6.8 KiB
ArmAsm
Raw Normal View History

/*
* Memory Setup stuff - taken from blob memsetup.S
*
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
* Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
*
* Modified for the Samsung SMDK2410 by
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2008
* Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/s3c6400.h>
#ifdef CONFIG_SERIAL1
#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET)
#elif defined(CONFIG_SERIAL2)
#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART1_OFFSET)
#else
#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART2_OFFSET)
#endif
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
mov r12, lr
/* LED on only #8 */
ldr r0, =ELFIN_GPIO_BASE
ldr r1, =0x55540000
str r1, [r0, #GPNCON_OFFSET]
ldr r1, =0x55555555
str r1, [r0, #GPNPUD_OFFSET]
ldr r1, =0xf000
str r1, [r0, #GPNDAT_OFFSET]
/* Disable Watchdog */
ldr r0, =0x7e000000 @0x7e004000
orr r0, r0, #0x4000
mov r1, #0
str r1, [r0]
/* External interrupt pending clear */
ldr r0, =(ELFIN_GPIO_BASE+EINTPEND_OFFSET) /*EINTPEND*/
ldr r1, [r0]
str r1, [r0]
ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000
ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000
/* Disable all interrupts (VIC0 and VIC1) */
mvn r3, #0x0
str r3, [r0, #oINTMSK]
str r3, [r1, #oINTMSK]
/* Set all interrupts as IRQ */
mov r3, #0x0
str r3, [r0, #oINTMOD]
str r3, [r1, #oINTMOD]
/* Pending Interrupt Clear */
mov r3, #0x0
str r3, [r0, #oVECTADDR]
str r3, [r1, #oVECTADDR]
/* init system clock */
bl system_clock_init
#ifndef CONFIG_NAND_SPL
/* for UART */
bl uart_asm_init
#endif
#ifdef CONFIG_BOOT_NAND
/* simple init for NAND */
bl nand_asm_init
#endif
/* Memory subsystem address 0x7e00f120 */
ldr r0, =ELFIN_MEM_SYS_CFG
/* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */
mov r1, #S3C64XX_MEM_SYS_CFG_NAND
str r1, [r0]
bl mem_ctrl_asm_init
/* Wakeup support. Don't know if it's going to be used, untested. */
ldr r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
ldr r1, [r0]
bic r1, r1, #0xfffffff7
cmp r1, #0x8
beq wakeup_reset
1:
mov lr, r12
mov pc, lr
wakeup_reset:
/* Clear wakeup status register */
ldr r0, =(ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET)
ldr r1, [r0]
str r1, [r0]
/* LED test */
ldr r0, =ELFIN_GPIO_BASE
ldr r1, =0x3000
str r1, [r0, #GPNDAT_OFFSET]
/* Load return address and jump to kernel */
ldr r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
/* r1 = physical address of s3c6400_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel (sleep-s3c6400.S) */
mov pc, r1
nop
nop
/*
* system_clock_init: Initialize core clock and bus clock.
* void system_clock_init(void)
*/
system_clock_init:
ldr r0, =ELFIN_CLOCK_POWER_BASE /* 0x7e00f000 */
#ifdef CONFIG_SYNC_MODE
ldr r1, [r0, #OTHERS_OFFSET]
mov r2, #0x40
orr r1, r1, r2
str r1, [r0, #OTHERS_OFFSET]
nop
nop
nop
nop
nop
ldr r2, =0x80
orr r1, r1, r2
str r1, [r0, #OTHERS_OFFSET]
check_syncack:
ldr r1, [r0, #OTHERS_OFFSET]
ldr r2, =0xf00
and r1, r1, r2
cmp r1, #0xf00
bne check_syncack
#else /* ASYNC Mode */
nop
nop
nop
nop
nop
/*
* This was unconditional in original Samsung sources, but it doesn't
* seem to make much sense on S3C6400.
*/
#ifndef CONFIG_S3C6400
ldr r1, [r0, #OTHERS_OFFSET]
bic r1, r1, #0xC0
orr r1, r1, #0x40
str r1, [r0, #OTHERS_OFFSET]
wait_for_async:
ldr r1, [r0, #OTHERS_OFFSET]
and r1, r1, #0xf00
cmp r1, #0x0
bne wait_for_async
#endif
ldr r1, [r0, #OTHERS_OFFSET]
bic r1, r1, #0x40
str r1, [r0, #OTHERS_OFFSET]
#endif
mov r1, #0xff00
orr r1, r1, #0xff
str r1, [r0, #APLL_LOCK_OFFSET]
str r1, [r0, #MPLL_LOCK_OFFSET]
/* Set Clock Divider */
ldr r1, [r0, #CLK_DIV0_OFFSET]
bic r1, r1, #0x30000
bic r1, r1, #0xff00
bic r1, r1, #0xff
ldr r2, =CLK_DIV_VAL
orr r1, r1, r2
str r1, [r0, #CLK_DIV0_OFFSET]
ldr r1, =APLL_VAL
str r1, [r0, #APLL_CON_OFFSET]
ldr r1, =MPLL_VAL
str r1, [r0, #MPLL_CON_OFFSET]
/* FOUT of EPLL is 96MHz */
ldr r1, =0x200203
str r1, [r0, #EPLL_CON0_OFFSET]
ldr r1, =0x0
str r1, [r0, #EPLL_CON1_OFFSET]
/* APLL, MPLL, EPLL select to Fout */
ldr r1, [r0, #CLK_SRC_OFFSET]
orr r1, r1, #0x7
str r1, [r0, #CLK_SRC_OFFSET]
/* wait at least 200us to stablize all clock */
mov r1, #0x10000
1: subs r1, r1, #1
bne 1b
/* Synchronization for VIC port */
#if defined(CONFIG_SYNC_MODE)
ldr r1, [r0, #OTHERS_OFFSET]
orr r1, r1, #0x20
str r1, [r0, #OTHERS_OFFSET]
#elif !defined(CONFIG_S3C6400)
/* According to 661558um_S3C6400X_rev10.pdf 0x20 is reserved */
ldr r1, [r0, #OTHERS_OFFSET]
bic r1, r1, #0x20
str r1, [r0, #OTHERS_OFFSET]
#endif
mov pc, lr
#ifndef CONFIG_NAND_SPL
/*
* uart_asm_init: Initialize UART's pins
*/
uart_asm_init:
/* set GPIO to enable UART */
ldr r0, =ELFIN_GPIO_BASE
ldr r1, =0x220022
str r1, [r0, #GPACON_OFFSET]
mov pc, lr
#endif
#ifdef CONFIG_BOOT_NAND
/*
* NAND Interface init for SMDK6400
*/
nand_asm_init:
ldr r0, =ELFIN_NAND_BASE
ldr r1, [r0, #NFCONF_OFFSET]
orr r1, r1, #0x70
orr r1, r1, #0x7700
str r1, [r0, #NFCONF_OFFSET]
ldr r1, [r0, #NFCONT_OFFSET]
orr r1, r1, #0x07
str r1, [r0, #NFCONT_OFFSET]
mov pc, lr
#endif
#ifdef CONFIG_ENABLE_MMU
/*
* MMU Table for SMDK6400
*/
/* form a first-level section entry */
.macro FL_SECTION_ENTRY base,ap,d,c,b
.word (\base << 20) | (\ap << 10) | \
(\d << 5) | (1<<4) | (\c << 3) | (\b << 2) | (1<<1)
.endm
.section .mmudata, "a"
.align 14
/* the following alignment creates the mmu table at address 0x4000. */
.globl mmu_table
mmu_table:
.set __base, 0
/* 1:1 mapping for debugging */
.rept 0xA00
FL_SECTION_ENTRY __base, 3, 0, 0, 0
.set __base, __base + 1
.endr
/* access is not allowed. */
.rept 0xC00 - 0xA00
.word 0x00000000
.endr
/* 128MB for SDRAM 0xC0000000 -> 0x50000000 */
.set __base, 0x500
.rept 0xC80 - 0xC00
FL_SECTION_ENTRY __base, 3, 0, 1, 1
.set __base, __base + 1
.endr
/* access is not allowed. */
.rept 0x1000 - 0xc80
.word 0x00000000
.endr
#endif