u-boot/include/configs/mgcoge3un.h

87 lines
2.7 KiB
C
Raw Normal View History

/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Prafulla Wadaskar <prafulla@marvell.com>
*
* (C) Copyright 2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2010-2011
* Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
/* for linking errors see
* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
#ifndef _CONFIG_MGCOGE3UN_H
#define _CONFIG_MGCOGE3UN_H
/* include common defines/options for all arm based Keymile boards */
#include "km/km_arm.h"
/*
* Version number information
*/
#define CONFIG_IDENT_STRING "\nKeymile MGCOGE3UN"
#define CONFIG_HOSTNAME mgcoge3un
#define CONFIG_MGCOGE3UN
#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
#define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/
/* we use a new RAM type on mgcoge3un board */
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
/*
* mgcoge3un has a fixed link to the marvell switch
* with 100MB full duplex and autoneg off, for this
* reason we have to change the default settings
*/
#define PORT_SERIAL_CONTROL_VALUE ( \
MVGBE_FORCE_LINK_PASS | \
MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
MVGBE_ADV_NO_FLOW_CTRL | \
MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
MVGBE_FORCE_BP_MODE_NO_JAM | \
(1 << 9) /* Reserved bit has to be 1 */ | \
MVGBE_DO_NOT_FORCE_LINK_FAIL | \
MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
MVGBE_DTE_ADV_0 | \
MVGBE_MIIPHY_MAC_MODE | \
MVGBE_AUTO_NEG_NO_CHANGE | \
MVGBE_MAX_RX_PACKET_1552BYTE | \
MVGBE_CLR_EXT_LOOPBACK | \
MVGBE_SET_FULL_DUPLEX_MODE | \
MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
MVGBE_SET_GMII_SPEED_TO_10_100 |\
MVGBE_SET_MII_SPEED_TO_100)
#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
/*
* PCIe port not used on mgcoge3un
*/
#undef CONFIG_KIRKWOOD_PCIE_INIT
#endif /* _CONFIG_MGCOGE3UN_H */