u-boot/include/configs/omap730.h

265 lines
14 KiB
C
Raw Normal View History

/*
*
* BRIEF MODULE DESCRIPTION
* OMAP730 hardware map
*
* Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk)
* Author: MPC-Data Limited
* Dave Peverley
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __INCLUDED_OMAP730_H
#define __INCLUDED_OMAP730_H
#include <asm/arch/sizes.h>
/***************************************************************************
* OMAP730 Configuration Registers
**************************************************************************/
#define PERSEUS2_MPU_DEV_ID ((unsigned int)(0xFFFE1000))
#define PERSEUS2_GSM_DEV_ID0 ((unsigned int)(0xFFFE1000))
#define PERSEUS2_GDM_DEV_ID1 ((unsigned int)(0xFFFE1002))
#define DSP_CONF ((unsigned int)(0xFFFE1004))
#define PERSEUS2_MPU_DIE_ID0 ((unsigned int)(0xFFFE1008))
#define GSM_ASIC_CONF ((unsigned int)(0xFFFE1008))
#define PERSEUS2_MPU_DIE_ID1 ((unsigned int)(0xFFFE100C))
#define PERSEUS2_MODE1 ((unsigned int)(0xFFFE1010))
#define PERSEUS2_GSM_DIE_ID0 ((unsigned int)(0xFFFE1010))
#define PERSEUS2_GSM_DIE_ID1 ((unsigned int)(0xFFFE1012))
#define PERSEUS2_MODE2 ((unsigned int)(0xFFFE1014))
#define PERSEUS2_GSM_DIE_ID2 ((unsigned int)(0xFFFE1014))
#define PERSEUS2_GSM_DIE_ID3 ((unsigned int)(0xFFFE1016))
#define PERSEUS2_ANALOG_CELLS_CONF ((unsigned int)(0xFFFE1018))
#define SPECCTL ((unsigned int)(0xFFFE101C))
#define SPARE1 ((unsigned int)(0xFFFE1020))
#define SPARE2 ((unsigned int)(0xFFFE1024))
#define GSM_PBG_IRQ ((unsigned int)(0xFFFE1028))
#define DMA_REQ_CONF ((unsigned int)(0xFFFE1030))
#define PE_CONF_NO_DUAL ((unsigned int)(0xFFFE1060))
#define PERSEUS2_IO_CONF0 ((unsigned int)(0xFFFE1070))
#define PERSEUS2_IO_CONF1 ((unsigned int)(0xFFFE1074))
#define PERSEUS2_IO_CONF2 ((unsigned int)(0xFFFE1078))
#define PERSEUS2_IO_CONF3 ((unsigned int)(0xFFFE107C))
#define PERSEUS2_IO_CONF4 ((unsigned int)(0xFFFE1080))
#define PERSEUS2_IO_CONF5 ((unsigned int)(0xFFFE1084))
#define PERSEUS2_IO_CONF6 ((unsigned int)(0xFFFE1088))
#define PERSEUS2_IO_CONF7 ((unsigned int)(0xFFFE108C))
#define PERSEUS2_IO_CONF8 ((unsigned int)(0xFFFE1090))
#define PERSEUS2_IO_CONF9 ((unsigned int)(0xFFFE1094))
#define PERSEUS2_IO_CONF10 ((unsigned int)(0xFFFE1098))
#define PERSEUS2_IO_CONF11 ((unsigned int)(0xFFFE109C))
#define PERSEUS2_IO_CONF12 ((unsigned int)(0xFFFE10A0))
#define PERSEUS2_IO_CONF13 ((unsigned int)(0xFFFE10A4))
#define PERSEUS_PCC_CONF_REG ((unsigned int)(0xFFFE10B4))
#define BIST_STATUS_INTERNAL ((unsigned int)(0xFFFE10B8))
#define BIST_CONTROL ((unsigned int)(0xFFFE10C0))
#define BOOT_ROM_REG ((unsigned int)(0xFFFE10C4))
#define PRODUCTION_ID_REG ((unsigned int)(0xFFFE10C8))
#define BIST_SECROM_SIGNATURE1_INTERNAL ((unsigned int)(0xFFFE10D0))
#define BIST_SECROM_SIGNATURE2_INTERNAL ((unsigned int)(0xFFFE10D4))
#define BIST_CONTROL_2 ((unsigned int)(0xFFFE10D8))
#define DEBUG1 ((unsigned int)(0xFFFE10E0))
#define DEBUG2 ((unsigned int)(0xFFFE10E4))
#define DEBUG_DMA_IRQ ((unsigned int)(0xFFFE10E8))
/***************************************************************************
* OMAP730 EMIFS Registers (TRM 2.5.7)
**************************************************************************/
#define TCMIF_BASE 0xFFFECC00
#define EMIFS_LRUREG (TCMIF_BASE + 0x04)
#define EMIFS_CONFIG (TCMIF_BASE + 0x0C)
#define FLASH_CFG_0 (TCMIF_BASE + 0x10)
#define FLASH_CFG_1 (TCMIF_BASE + 0x14)
#define FLASH_CFG_2 (TCMIF_BASE + 0x18)
#define FLASH_CFG_3 (TCMIF_BASE + 0x1C)
#define FL_CFG_DYN_WAIT (TCMIF_BASE + 0x40)
#define EMIFS_TIMEOUT1_REG (TCMIF_BASE + 0x28)
#define EMIFS_TIMEOUT2_REG (TCMIF_BASE + 0x2C)
#define EMIFS_TIMEOUT3_REG (TCMIF_BASE + 0x30)
#define EMIFS_ABORT_ADDR (TCMIF_BASE + 0x44)
#define EMIFS_ABORT_TYPE (TCMIF_BASE + 0x48)
#define EMIFS_ABORT_TOUT (TCMIF_BASE + 0x4C)
#define FLASH_ACFG_0_1 (TCMIF_BASE + 0x50)
#define FLASH_ACFG_1_1 (TCMIF_BASE + 0x54)
#define FLASH_ACFG_2_1 (TCMIF_BASE + 0x58)
#define FLASH_ACFG_3_1 (TCMIF_BASE + 0x5C)
/***************************************************************************
* OMAP730 Interrupt handlers
**************************************************************************/
#define OMAP_IH1_BASE 0xFFFECB00 /* MPU Level 1 IRQ handler */
#define OMAP_IH2_BASE 0xfffe0000
/***************************************************************************
* OMAP730 Timers
*
* There are three general purpose OS timers in the 730 that can be
* configured in autoreload or one-shot modes.
**************************************************************************/
#define OMAP730_32kHz_TIMER_BASE 0xFFFB9000
/* 32k Timer Registers */
#define TIMER32k_CR 0x08
#define TIMER32k_TVR 0x00
#define TIMER32k_TCR 0x04
/* 32k Timer Control Register definition */
#define TIMER32k_TSS (1<<0)
#define TIMER32k_TRB (1<<1)
#define TIMER32k_INT (1<<2)
#define TIMER32k_ARL (1<<3)
/* MPU Timer base addresses */
#define OMAP730_MPUTIMER_BASE 0xfffec500
#define OMAP730_MPUTIMER_OFF 0x00000100
#define OMAP730_TIMER1_BASE 0xFFFEC500
#define OMAP730_TIMER2_BASE 0xFFFEC600
#define OMAP730_TIMER3_BASE 0xFFFEC700
/* MPU Timer Register offsets */
#define CNTL_TIMER 0x00 /* MPU_CNTL_TIMER */
#define LOAD_TIM 0x04 /* MPU_LOAD_TIMER */
#define READ_TIM 0x08 /* MPU_READ_TIMER */
/* MPU_CNTL_TIMER register bits */
#define MPUTIM_FREE (1<<6)
#define MPUTIM_CLOCK_ENABLE (1<<5)
#define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
#define MPUTIM_PTV_BIT 2
#define MPUTIM_AR (1<<1)
#define MPUTIM_ST (1<<0)
/***************************************************************************
* OMAP730 GPIO
*
* The GPIO control is split over 6 register bases in the OMAP730 to allow
* access to all the (6 x 32) GPIO pins!
**************************************************************************/
#define OMAP730_GPIO_BASE_1 0xFFFBC000
#define OMAP730_GPIO_BASE_2 0xFFFBC800
#define OMAP730_GPIO_BASE_3 0xFFFBD000
#define OMAP730_GPIO_BASE_4 0xFFFBD800
#define OMAP730_GPIO_BASE_5 0xFFFBE000
#define OMAP730_GPIO_BASE_6 0xFFFBE800
#define GPIO_DATA_INPUT 0x00
#define GPIO_DATA_OUTPUT 0x04
#define GPIO_DIRECTION_CONTROL 0x08
#define GPIO_INTERRUPT_CONTROL 0x0C
#define GPIO_INTERRUPT_MASK 0x10
#define GPIO_INTERRUPT_STATUS 0x14
#define GPIO_DATA_INPUT_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_INPUT))
#define GPIO_DATA_OUTPUT_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_OUTPUT))
#define GPIO_DIRECTION_CONTROL_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DIRECTION_CONTROL))
#define GPIO_INTERRUPT_CONTROL_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_CONTROL))
#define GPIO_INTERRUPT_MASK_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_MASK))
#define GPIO_INTERRUPT_STATUS_1 ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_STATUS))
#define GPIO_DATA_INPUT_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_INPUT))
#define GPIO_DATA_OUTPUT_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_OUTPUT))
#define GPIO_DIRECTION_CONTROL_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DIRECTION_CONTROL))
#define GPIO_INTERRUPT_CONTROL_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_CONTROL))
#define GPIO_INTERRUPT_MASK_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_MASK))
#define GPIO_INTERRUPT_STATUS_2 ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_STATUS))
#define GPIO_DATA_INPUT_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_INPUT))
#define GPIO_DATA_OUTPUT_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT))
#define GPIO_DIRECTION_CONTROL_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL))
#define GPIO_INTERRUPT_CONTROL_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_CONTROL))
#define GPIO_INTERRUPT_MASK_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_MASK))
#define GPIO_INTERRUPT_STATUS_3 ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_STATUS))
#define GPIO_DATA_INPUT_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_INPUT))
#define GPIO_DATA_OUTPUT_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_OUTPUT))
#define GPIO_DIRECTION_CONTROL_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DIRECTION_CONTROL))
#define GPIO_INTERRUPT_CONTROL_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_CONTROL))
#define GPIO_INTERRUPT_MASK_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_MASK))
#define GPIO_INTERRUPT_STATUS_4 ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_STATUS))
#define GPIO_DATA_INPUT_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_INPUT))
#define GPIO_DATA_OUTPUT_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_OUTPUT))
#define GPIO_DIRECTION_CONTROL_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL))
#define GPIO_INTERRUPT_CONTROL_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_CONTROL))
#define GPIO_INTERRUPT_MASK_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_MASK))
#define GPIO_INTERRUPT_STATUS_5 ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_STATUS))
#define GPIO_DATA_INPUT_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_INPUT))
#define GPIO_DATA_OUTPUT_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_OUTPUT))
#define GPIO_DIRECTION_CONTROL_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DIRECTION_CONTROL))
#define GPIO_INTERRUPT_CONTROL_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_CONTROL))
#define GPIO_INTERRUPT_MASK_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_MASK))
#define GPIO_INTERRUPT_STATUS_6 ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_STATUS))
/***************************************************************************
* OMAP730 Watchdog timers
**************************************************************************/
#define WDTIM_BASE 0xFFFEC800
#define WDTIM_CONTROL (WDTIM_BASE + 0x00) /* MPU_CNTL_TIMER */
#define WDTIM_LOAD (WDTIM_BASE + 0x04) /* MPU_LOAD_TIMER */
#define WDTIM_READ (WDTIM_BASE + 0x04) /* MPU_READ_TIMER */
#define WDTIM_MODE (WDTIM_BASE + 0x08) /* MPU_TIMER_MODE */
/***************************************************************************
* OMAP730 Interrupt Registers
**************************************************************************/
/* Interrupt Register offsets */
#define IRQ_ITR 0x00
#define IRQ_MIR 0x04
#define IRQ_SIR_IRQ 0x10
#define IRQ_SIR_FIQ 0x14
#define IRQ_CONTROL_REG 0x18
#define IRQ_ILR0 0x1C /* ILRx == ILR0 + (0x4 * x) */
#define IRQ_SIR 0x9C /* a.k.a.IRQ_ISR */
#define IRQ_GMIR 0xA0
#define REG_IHL1_MIR (OMAP_IH1_BASE + IRQ_MIR)
#define REG_IHL2_MIR (OMAP_IH2_BASE + IRQ_MIR)
/***************************************************************************
* OMAP730 Intersystem Communication Register (TRM 4.5)
**************************************************************************/
#define ICR_BASE 0xFFFBB800
#define M_ICR (ICR_BASE + 0x00)
#define G_ICR (ICR_BASE + 0x02)
#define M_CTL (ICR_BASE + 0x04)
#define G_CTL (ICR_BASE + 0x06)
#define PM_BA (ICR_BASE + 0x0A)
#define DM_BA (ICR_BASE + 0x0C)
#define RM_BA (ICR_BASE + 0x0E)
#define SSPI_TAS (ICR_BASE + 0x12)
#endif /* ! __INCLUDED_OMAP730_H */