u-boot/board/freescale/p1_p2_rdb_pc/spl_minimal.c

137 lines
3.8 KiB
C
Raw Normal View History

/*
* Copyright 2011 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ns16550.h>
#include <asm/io.h>
#include <nand.h>
#include <linux/compiler.h>
#include <asm/fsl_law.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/global_data.h>
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_SYS_INIT_L2_ADDR
/*
* Fixed sdram init -- doesn't use serial presence detect.
*/
static void sdram_init(void)
{
ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
#endif
__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);
/* Set, but do not enable the memory */
__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
asm volatile("sync;isync");
udelay(500);
/* Let the controller go */
out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
}
#endif
void board_init_f(ulong bootflag)
{
u32 plat_ratio;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
#ifndef CONFIG_QE
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
#elif defined(CONFIG_P1021RDB)
par_io_t *par_io = (par_io_t *)&(gur->qe_par_io);
#endif
/* initialize selected port with appropriate baud rate */
plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
plat_ratio >>= 1;
gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
gd->bus_clk / 16 / CONFIG_BAUDRATE);
puts("\nNAND boot... ");
#ifndef CONFIG_QE
/* init DDR3 reset signal */
__raw_writel(0x02000000, &pgpio->gpdir);
__raw_writel(0x00200000, &pgpio->gpodr);
__raw_writel(0x00000000, &pgpio->gpdat);
udelay(1000);
__raw_writel(0x00200000, &pgpio->gpdat);
udelay(1000);
__raw_writel(0x00000000, &pgpio->gpdir);
#elif defined(CONFIG_P1021RDB)
/* init DDR3 reset signal CE_PB8 */
out_be32(&par_io[1].cpdir1, 0x00004000);
out_be32(&par_io[1].cpodr, 0x00800000);
out_be32(&par_io[1].cppar1, 0x00000000);
/* reset DDR3 */
out_be32(&par_io[1].cpdat, 0x00800000);
udelay(1000);
out_be32(&par_io[1].cpdat, 0x00000000);
udelay(1000);
out_be32(&par_io[1].cpdat, 0x00800000);
/* disable the CE_PB8 */
out_be32(&par_io[1].cpdir1, 0x00000000);
#endif
#ifndef CONFIG_SYS_INIT_L2_ADDR
/* Initialize the DDR3 */
sdram_init();
#endif
/* copy code to RAM and jump to it - this should not return */
/* NOTE - code has to be copied out of NAND buffer before
* other blocks can be read.
*/
relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
}
void board_init_r(gd_t *gd, ulong dest_addr)
{
nand_boot();
}
void putc(char c)
{
if (c == '\n')
NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
}
void puts(const char *str)
{
while (*str)
putc(*str++);
}