u-boot/arch/arm/dts/tegra20-harmony.dts

114 lines
2.2 KiB
Text
Raw Normal View History

/dts-v1/;
#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Harmony evaluation board";
compatible = "nvidia,harmony", "nvidia,tegra20";
chosen {
stdout-path = &uartd;
};
aliases {
usb0 = "/usb@c5008000";
usb1 = "/usb@c5004000";
sdhci0 = "/sdhci@c8000600";
sdhci1 = "/sdhci@c8000200";
};
memory {
reg = <0x00000000 0x40000000>;
};
host1x {
status = "okay";
dc@54200000 {
status = "okay";
rgb {
status = "okay";
nvidia,panel = <&lcd_panel>;
};
};
};
serial@70006300 {
clock-frequency = < 216000000 >;
};
nand-controller@70008000 {
nvidia,wp-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
nvidia,width = <8>;
nvidia,timing = <26 100 20 80 20 10 12 10 70>;
nand@0 {
reg = <0>;
compatible = "hynix,hy27uf4g2b", "nand-flash";
};
};
i2c@7000c000 {
status = "disabled";
};
i2c@7000c400 {
status = "disabled";
};
i2c@7000c500 {
status = "disabled";
};
i2c@7000d000 {
status = "disabled";
};
usb@c5000000 {
status = "disabled";
};
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) 0>;
};
sdhci@c8000200 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@c8000600 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
lcd_panel: panel {
clock = <42430000>;
xres = <1024>;
yres = <600>;
left-margin = <138>;
right-margin = <34>;
hsync-len = <136>;
lower-margin = <4>;
upper-margin = <21>;
vsync-len = <4>;
hsync-active-high;
vsyncx-active-high;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 0 0>;
nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(B, 5)
GPIO_ACTIVE_HIGH>;
nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2)
GPIO_ACTIVE_HIGH>;
nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
GPIO_ACTIVE_HIGH>;
nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(C, 6)
GPIO_ACTIVE_HIGH>;
nvidia,panel-timings = <0 0 200 0 0>;
};
};