u-boot/arch/arm/cpu/armv7/exynos/clock_init.h

155 lines
3.9 KiB
C
Raw Normal View History

/*
* Clock initialization routines
*
* Copyright (c) 2011 The Chromium OS Authors.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __EXYNOS_CLOCK_INIT_H
#define __EXYNOS_CLOCK_INIT_H
enum {
MEM_TIMINGS_MSR_COUNT = 4,
};
/* These are the ratio's for configuring ARM clock */
struct arm_clk_ratios {
unsigned arm_freq_mhz; /* Frequency of ARM core in MHz */
unsigned apll_mdiv;
unsigned apll_pdiv;
unsigned apll_sdiv;
unsigned arm2_ratio;
unsigned apll_ratio;
unsigned pclk_dbg_ratio;
unsigned atb_ratio;
unsigned periph_ratio;
unsigned acp_ratio;
unsigned cpud_ratio;
unsigned arm_ratio;
};
/* These are the memory timings for a particular memory type and speed */
struct mem_timings {
enum mem_manuf mem_manuf; /* Memory manufacturer */
enum ddr_mode mem_type; /* Memory type */
unsigned frequency_mhz; /* Frequency of memory in MHz */
/* Here follow the timing parameters for the selected memory */
unsigned apll_mdiv;
unsigned apll_pdiv;
unsigned apll_sdiv;
unsigned mpll_mdiv;
unsigned mpll_pdiv;
unsigned mpll_sdiv;
unsigned cpll_mdiv;
unsigned cpll_pdiv;
unsigned cpll_sdiv;
unsigned gpll_mdiv;
unsigned gpll_pdiv;
unsigned gpll_sdiv;
unsigned epll_mdiv;
unsigned epll_pdiv;
unsigned epll_sdiv;
unsigned vpll_mdiv;
unsigned vpll_pdiv;
unsigned vpll_sdiv;
unsigned bpll_mdiv;
unsigned bpll_pdiv;
unsigned bpll_sdiv;
unsigned pclk_cdrex_ratio;
unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
unsigned timing_ref;
unsigned timing_row;
unsigned timing_data;
unsigned timing_power;
/* DQS, DQ, DEBUG offsets */
unsigned phy0_dqs;
unsigned phy1_dqs;
unsigned phy0_dq;
unsigned phy1_dq;
unsigned phy0_tFS;
unsigned phy1_tFS;
unsigned phy0_pulld_dqs;
unsigned phy1_pulld_dqs;
unsigned lpddr3_ctrl_phy_reset;
unsigned ctrl_start_point;
unsigned ctrl_inc;
unsigned ctrl_start;
unsigned ctrl_dll_on;
unsigned ctrl_ref;
unsigned ctrl_force;
unsigned ctrl_rdlat;
unsigned ctrl_bstlen;
unsigned fp_resync;
unsigned iv_size;
unsigned dfi_init_start;
unsigned aref_en;
unsigned rd_fetch;
unsigned zq_mode_dds;
unsigned zq_mode_term;
unsigned zq_mode_noterm; /* 1 to allow termination disable */
unsigned memcontrol;
unsigned memconfig;
unsigned membaseconfig0;
unsigned membaseconfig1;
unsigned prechconfig_tp_cnt;
unsigned dpwrdn_cyc;
unsigned dsref_cyc;
unsigned concontrol;
/* Channel and Chip Selection */
uint8_t dmc_channels; /* number of memory channels */
uint8_t chips_per_channel; /* number of chips per channel */
uint8_t chips_to_configure; /* number of chips to configure */
uint8_t send_zq_init; /* 1 to send this command */
unsigned impedance; /* drive strength impedeance */
uint8_t gate_leveling_enable; /* check gate leveling is enabled */
};
/**
* Get the correct memory timings for our selected memory type and speed.
*
* This function can be called from SPL or the main U-Boot.
*
* @return pointer to the memory timings that we should use
*/
struct mem_timings *clock_get_mem_timings(void);
/*
* Initialize clock for the device
*/
void system_clock_init(void);
/*
* Set clock divisor value for booting from EMMC.
*/
void emmc_boot_clk_div_set(void);
#endif