sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
u-boot/board/freescale/t208xqds/t2080_rcw.cfg

17 lines
465 B
INI
Raw Normal View History

t2080qds/ramboot: enable PBL tool for t2080qds Add the default RCW(SerDes 0x66_0x16) and PBI configure file for T2080QDS board, so we can use PBL tool to generate the ramboot image to support boot from NAND/SPI/SD. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
2013-11-22 09:39:12 +00:00
#PBL preamble and RCW header
aa55aa55 010e0100
powerpc/t2080: updating rcw for silicon v1.1 T2080 v1.1 requires different MEM_PLL_RAT from previous v1.0, and also update core frequency to 1.8GHz for v1.1. We reserve the support for T2080 v1.0 and enable v1.1 by default. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-14 02:31:22 +00:00
#For T2080 v1.0
#SerDes=0x66_0x16, Core=1533MHz, DDR=2133MT/s
#12100017 15000000 00000000 00000000
#66150002 00008400 e8104000 c1000000
#00000000 00000000 00000000 000307fc
#00000000 00000000 00000000 00000004
#For T2080 v1.1
#SerDes=0x66_0x15, Core=1800MHz, DDR=1867MT/s
0c070012 0e000000 00000000 00000000
66150002 00000000 e8104000 c1000000
t2080qds/ramboot: enable PBL tool for t2080qds Add the default RCW(SerDes 0x66_0x16) and PBI configure file for T2080QDS board, so we can use PBL tool to generate the ramboot image to support boot from NAND/SPI/SD. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
2013-11-22 09:39:12 +00:00
00000000 00000000 00000000 000307fc
00000000 00000000 00000000 00000004