u-boot/board/freescale/t104xrdb/t1040_nand_rcw.cfg

#PBL preamble and RCW header
aa55aa55 010e0100
# serdes protocol 0x66
0c18000e 0e000000 00000000 00000000
66000002 80000002 e8106000 01000000
00000000 00000000 00000000 00032810
00000000 0342500f 00000000 00000000
board/t104xrdb: Add support of NAND, SD, SPI boot for T104xRDB Add support of 2 stage NAND, SD, SPI boot loader using SPL framework. here, PBL initialise the internal SRAM and copy SPL(160KB). This further initialise DDR using SPD and environment and copy u-boot(768 KB) from NAND to DDR. Finally SPL transer control to u-boot. Initialise/create followings required for SPL framework - Add spl.c which defines board_init_f, board_init_r - update tlb and ddr accordingly Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 2014-04-08 13:43:56 +00:00			`#PBL preamble and RCW header`
			`aa55aa55 010e0100`
			`# serdes protocol 0x66`
			`0c18000e 0e000000 00000000 00000000`
			`66000002 80000002 e8106000 01000000`
			`00000000 00000000 00000000 00032810`
			`00000000 0342500f 00000000 00000000`