u-boot/board/esd/pmc440/cmd_pmc440.c

564 lines
13 KiB
C
Raw Normal View History

/*
* (C) Copyright 2007-2008
* Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#include <command.h>
#include <asm/io.h>
#include <asm/cache.h>
#include <asm/processor.h>
#include "pmc440.h"
int is_monarch(void);
int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
uchar *buffer, unsigned cnt);
int eeprom_write_enable(unsigned dev_addr, int state);
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CMD_BSP)
static int got_fifoirq;
static int got_hcirq;
int fpga_interrupt(u32 arg)
{
pmc440_fpga_t *fpga = (pmc440_fpga_t *)arg;
int rc = -1; /* not for us */
u32 status = FPGA_IN32(&fpga->status);
/* check for interrupt from fifo module */
if (status & STATUS_FIFO_ISF) {
/* disable this int source */
FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
rc = 0;
got_fifoirq = 1; /* trigger backend */
}
if (status & STATUS_HOST_ISF) {
FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
rc = 0;
got_hcirq = 1;
}
return rc;
}
int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
got_hcirq = 0;
FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_HCINT_GATE);
irq_install_handler(IRQ0_FPGA,
(interrupt_handler_t *)fpga_interrupt,
fpga);
FPGA_SETBITS(&fpga->ctrla, CTRL_HOST_IE);
while (!got_hcirq) {
/* Abort if ctrl-c was pressed */
if (ctrlc()) {
puts("\nAbort\n");
break;
}
}
if (got_hcirq)
printf("Got interrupt!\n");
FPGA_CLRBITS(&fpga->ctrla, CTRL_HOST_IE);
irq_free_handler(IRQ0_FPGA);
return 0;
}
U_BOOT_CMD(
waithci, 1, 1, do_waithci,
"waithci - Wait for host control interrupt\n",
NULL
);
void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
{
u32 ctrl;
while (!((ctrl = FPGA_IN32(&fpga->fifo[f].ctrl)) & FIFO_EMPTY)) {
printf("%5d %d %3d %08x",
(*n)++, f, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
FPGA_IN32(&fpga->fifo[f].data));
if (ctrl & FIFO_OVERFLOW) {
printf(" OVERFLOW\n");
FPGA_CLRBITS(&fpga->fifo[f].ctrl, FIFO_OVERFLOW);
} else
printf("\n");
}
}
int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
int i;
int n = 0;
u32 ctrl, data, f;
char str[] = "\\|/-";
int abort = 0;
int count = 0;
int count2 = 0;
switch (argc) {
case 1:
/* print all fifos status information */
printf("fifo level status\n");
printf("______________________________\n");
for (i=0; i<FIFO_COUNT; i++) {
ctrl = FPGA_IN32(&fpga->fifo[i].ctrl);
printf(" %d %3d %s%s%s %s\n",
i, ctrl & (FIFO_LEVEL_MASK | FIFO_FULL),
ctrl & FIFO_FULL ? "FULL " : "",
ctrl & FIFO_EMPTY ? "EMPTY " : "",
ctrl & (FIFO_FULL|FIFO_EMPTY) ? "" : "NOT EMPTY",
ctrl & FIFO_OVERFLOW ? "OVERFLOW" : "");
}
break;
case 2:
/* completely read out fifo 'n' */
if (!strcmp(argv[1],"read")) {
printf(" # fifo level data\n");
printf("______________________________\n");
for (i=0; i<FIFO_COUNT; i++)
dump_fifo(fpga, i, &n);
} else if (!strcmp(argv[1],"wait")) {
got_fifoirq = 0;
irq_install_handler(IRQ0_FPGA,
(interrupt_handler_t *)fpga_interrupt,
fpga);
printf(" # fifo level data\n");
printf("______________________________\n");
/* enable all fifo interrupts */
FPGA_OUT32(&fpga->hostctrl,
HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG);
for (i=0; i<FIFO_COUNT; i++) {
/* enable interrupts from all fifos */
FPGA_SETBITS(&fpga->fifo[i].ctrl, FIFO_IE);
}
while (1) {
/* wait loop */
while (!got_fifoirq) {
count++;
if (!(count % 100)) {
count2++;
putc(0x08); /* backspace */
putc(str[count2 % 4]);
}
/* Abort if ctrl-c was pressed */
if ((abort = ctrlc())) {
puts("\nAbort\n");
break;
}
udelay(1000);
}
if (abort)
break;
/* simple fifo backend */
if (got_fifoirq) {
for (i=0; i<FIFO_COUNT; i++)
dump_fifo(fpga, i, &n);
got_fifoirq = 0;
/* unmask global fifo irq */
FPGA_OUT32(&fpga->hostctrl,
HOSTCTRL_FIFOIE_GATE |
HOSTCTRL_FIFOIE_FLAG);
}
}
/* disable all fifo interrupts */
FPGA_OUT32(&fpga->hostctrl, HOSTCTRL_FIFOIE_GATE);
for (i=0; i<FIFO_COUNT; i++)
FPGA_CLRBITS(&fpga->fifo[i].ctrl, FIFO_IE);
irq_free_handler(IRQ0_FPGA);
} else {
printf("Usage:\nfifo %s\n", cmdtp->help);
return 1;
}
break;
case 4:
case 5:
if (!strcmp(argv[1],"write")) {
/* get fifo number or fifo address */
f = simple_strtoul(argv[2], NULL, 16);
/* data paramter */
data = simple_strtoul(argv[3], NULL, 16);
/* get optional count parameter */
n = 1;
if (argc >= 5)
n = (int)simple_strtoul(argv[4], NULL, 10);
if (f < FIFO_COUNT) {
printf("writing %d x %08x to fifo %d\n",
n, data, f);
for (i=0; i<n; i++)
FPGA_OUT32(&fpga->fifo[f].data, data);
} else {
printf("writing %d x %08x to fifo port at "
"address %08x\n",
n, data, f);
for (i=0; i<n; i++)
out32(f, data);
}
} else {
printf("Usage:\nfifo %s\n", cmdtp->help);
return 1;
}
break;
default:
printf("Usage:\nfifo %s\n", cmdtp->help);
return 1;
}
return 0;
}
U_BOOT_CMD(
fifo, 5, 1, do_fifo,
"fifo - Fifo module operations\n",
"wait\nfifo read\n"
"fifo write fifo(0..3) data [cnt=1]\n"
"fifo write address(>=4) data [cnt=1]\n"
" - without arguments: print all fifo's status\n"
" - with 'wait' argument: interrupt driven read from all fifos\n"
" - with 'read' argument: read current contents from all fifos\n"
" - with 'write' argument: write 'data' 'cnt' times to "
"'fifo' or 'address'\n"
);
int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong sdsdp[5];
ulong delay;
int count=16;
if (argc < 2) {
printf("Usage:\nsbe %s\n", cmdtp->help);
return -1;
}
if (argc > 1) {
if (!strcmp(argv[1], "400")) {
/* PLB=133MHz, PLB/PCI=3 */
printf("Bootstrapping for 400MHz\n");
sdsdp[0]=0x8678624e;
sdsdp[1]=0x095fa030;
sdsdp[2]=0x40082350;
sdsdp[3]=0x0d050000;
} else if (!strcmp(argv[1], "533")) {
/* PLB=133MHz, PLB/PCI=3 */
printf("Bootstrapping for 533MHz\n");
sdsdp[0]=0x87788252;
sdsdp[1]=0x095fa030;
sdsdp[2]=0x40082350;
sdsdp[3]=0x0d050000;
} else if (!strcmp(argv[1], "667")) {
/* PLB=133MHz, PLB/PCI=4 */
printf("Bootstrapping for 667MHz\n");
sdsdp[0]=0x8778a256;
sdsdp[1]=0x0947a030;
sdsdp[2]=0x40082350;
sdsdp[3]=0x0d050000;
} else if (!strcmp(argv[1], "test")) {
/*
* TODO: this will replace the 667 MHz config above.
* But it needs some more testing on a real 667 MHz CPU.
*/
printf("Bootstrapping for test"
" (667MHz PLB=133PLB PLB/PCI=3)\n");
sdsdp[0]=0x8778a256;
sdsdp[1]=0x095fa030;
sdsdp[2]=0x40082350;
sdsdp[3]=0x0d050000;
} else {
printf("Usage:\nsbe %s\n", cmdtp->help);
return -1;
}
}
if (argc > 2) {
sdsdp[4] = 0;
if (argv[2][0]=='1')
sdsdp[4]=0x19750100;
else if (argv[2][0]=='0')
sdsdp[4]=0x19750000;
if (sdsdp[4])
count += 4;
}
if (argc > 3) {
delay = simple_strtoul(argv[3], NULL, 10);
if (delay > 20)
delay = 20;
sdsdp[4] |= delay;
}
printf("Writing boot EEPROM ...\n");
if (bootstrap_eeprom_write(CFG_I2C_BOOT_EEPROM_ADDR,
0, (uchar*)sdsdp, count) != 0)
printf("bootstrap_eeprom_write failed\n");
else
printf("done (dump via 'i2c md 52 0.1 14')\n");
return 0;
}
U_BOOT_CMD(
sbe, 4, 0, do_setup_bootstrap_eeprom,
"sbe - setup bootstrap eeprom\n",
"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
);
#if defined(CONFIG_PRAM)
#include <environment.h>
extern env_t *env_ptr;
int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
u32 memsize;
u32 pram, env_base;
char *v;
u32 param;
ulong *lptr;
memsize = gd->bd->bi_memsize;
v = getenv("pram");
if (v)
pram = simple_strtoul(v, NULL, 10);
else {
printf("Error: pram undefined. Please define pram in KiB\n");
return 1;
}
param = memsize - (pram << 10);
printf("PARAM: @%08x\n", param);
memset((void*)param, 0, (pram << 10));
env_base = memsize - 4096 - ((CFG_ENV_SIZE + 4096) & ~(4096-1));
memcpy((void*)env_base, env_ptr, CFG_ENV_SIZE);
lptr = (ulong*)memsize;
*(--lptr) = CFG_ENV_SIZE;
*(--lptr) = memsize - env_base;
*(--lptr) = crc32(0, (void*)(memsize - 0x08), 0x08);
*(--lptr) = 0;
/* make sure data can be accessed through PCI */
flush_dcache_range(param, param + (pram << 10) - 1);
return 0;
}
U_BOOT_CMD(
painit, 1, 1, do_painit,
"painit - prepare PciAccess system\n",
NULL
);
#endif /* CONFIG_PRAM */
int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
if (argc > 1) {
if (argv[1][0] == '0') {
/* assert */
printf("self-reset# asserted\n");
out_be32((void*)GPIO0_TCR,
in_be32((void*)GPIO0_TCR) | GPIO0_SELF_RST);
} else {
/* deassert */
printf("self-reset# deasserted\n");
out_be32((void*)GPIO0_TCR,
in_be32((void*)GPIO0_TCR) & ~GPIO0_SELF_RST);
}
} else {
printf("self-reset# is %s\n",
in_be32((void*)GPIO0_TCR) & GPIO0_SELF_RST ?
"active" : "inactive");
}
return 0;
}
U_BOOT_CMD(
selfreset, 2, 1, do_selfreset,
"selfreset- assert self-reset# signal\n",
NULL
);
int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
/* requiers bootet FPGA and PLD_IOEN_N active */
if (in_be32((void*)GPIO1_OR) & GPIO1_IOEN_N) {
printf("Error: resetout requires a bootet FPGA\n");
return -1;
}
if (argc > 1) {
if (argv[1][0] == '0') {
/* assert */
printf("PMC-RESETOUT# asserted\n");
FPGA_OUT32(&fpga->hostctrl,
HOSTCTRL_PMCRSTOUT_GATE);
} else {
/* deassert */
printf("PMC-RESETOUT# deasserted\n");
FPGA_OUT32(&fpga->hostctrl,
HOSTCTRL_PMCRSTOUT_GATE |
HOSTCTRL_PMCRSTOUT_FLAG);
}
} else {
printf("PMC-RESETOUT# is %s\n",
FPGA_IN32(&fpga->hostctrl) & HOSTCTRL_PMCRSTOUT_FLAG ?
"inactive" : "active");
}
return 0;
}
U_BOOT_CMD(
resetout, 2, 1, do_resetout,
"resetout - assert PMC-RESETOUT# signal\n",
NULL
);
int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
if (is_monarch()) {
printf("This command is only supported in non-monarch mode\n");
return -1;
}
if (argc > 1) {
if (argv[1][0] == '0') {
/* assert */
printf("inta# asserted\n");
out_be32((void*)GPIO1_TCR,
in_be32((void*)GPIO1_TCR) | GPIO1_INTA_FAKE);
} else {
/* deassert */
printf("inta# deasserted\n");
out_be32((void*)GPIO1_TCR,
in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE);
}
} else {
printf("inta# is %s\n",
in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ?
"active" : "inactive");
}
return 0;
}
U_BOOT_CMD(
inta, 2, 1, do_inta,
"inta - Assert/Deassert or query INTA# state in non-monarch mode\n",
NULL
);
/* test-only */
int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong pciaddr;
if (argc > 1) {
pciaddr = simple_strtoul(argv[1], NULL, 16);
pciaddr &= 0xf0000000;
/* map PCI address at 0xc0000000 in PLB space */
/* PMM1 Mask/Attribute - disabled b4 setting */
out32r(PCIX0_PMM1MA, 0x00000000);
/* PMM1 Local Address */
out32r(PCIX0_PMM1LA, 0xc0000000);
/* PMM1 PCI Low Address */
out32r(PCIX0_PMM1PCILA, pciaddr);
/* PMM1 PCI High Address */
out32r(PCIX0_PMM1PCIHA, 0x00000000);
/* 256MB + No prefetching, and enable region */
out32r(PCIX0_PMM1MA, 0xf0000001);
} else {
printf("Usage:\npmm %s\n", cmdtp->help);
}
return 0;
}
U_BOOT_CMD(
pmm, 2, 1, do_pmm,
"pmm - Setup pmm[1] registers\n",
"<pciaddr> (pciaddr will be aligned to 256MB)\n"
);
#if defined(CFG_EEPROM_WREN)
int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int query = argc == 1;
int state = 0;
if (query) {
/* Query write access state. */
state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, -1);
if (state < 0) {
puts("Query of write access state failed.\n");
} else {
printf("Write access for device 0x%0x is %sabled.\n",
CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
state = 0;
}
} else {
if ('0' == argv[1][0]) {
/* Disable write access. */
state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 0);
} else {
/* Enable write access. */
state = eeprom_write_enable(CFG_I2C_EEPROM_ADDR, 1);
}
if (state < 0) {
puts("Setup of write access state failed.\n");
}
}
return state;
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n",
NULL);
#endif /* #if defined(CFG_EEPROM_WREN) */
#endif /* CONFIG_CMD_BSP */