sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

zynq: Add zynq zc70x board support 

The Zynq-7000 APSOC zc702 and zc706 enabled complte embedded
processing includes ASIC and FPGA design.

ZC702-:

APSOC:
- XC7Z020-CLG484-1
Memory:
- DDR3 Component Memory 1GB
- 16MB Quad SPI Flash
- IIC - 1 KB EEPROM
Connectivity:
- Gigabit Ethernet GMII, RGMII and SGMII.
- USB OTG - Host USB
- IIC Bus Headers/HUB
- 1 CAN with Wake on CAN
- USB-UART
Video/Display:
- HDMI Video OUT
- 8X LEDs
Control & I/O:
- 3 User Push Buttons
- 2 User Switches
- 8 User LEDs

For more info on zc702 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm

ZC706-:

APSOC:
- XC7Z045 FFG900 -2 AP SoC
Memory:
- DDR3 Component Memory 1GB (PS)
- DDR3 SODIM Memory 1GB (PL)
- 2X16MB Quad SPI Flash (dual parallel)
- IIC - 1 KB EEPROM
Connectivity:
- PCIe Gen2x4
- SFP+ and SMA Pairs
- GigE RGMII Ethernet (PS)
- USB OTG 1 (PS) - Host USB
- IIC Bus Headers/HUB (PS)
- 1 CAN with Wake on CAN (PS)
- USB-UART
Video/Display:
- HDMI 8 color RGB 4.4.4 1080P-60 OUT
- HDMI IN 8 color RGB 4.4.4
Control & I/O:
- 2 User Push Buttons/Dip Switch, 2 User LEDs
- IIC access to GPIO
- SDIO (SD Card slot)
- 3 User Push Buttons, 2 User Switches, 8 User LEDs

For more info on zc706 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
This commit is contained in:
Jagannadha Sutradharudu Teki 2014-01-09 01:48:12 +05:30 committed by Albert ARIBAUD
parent ba45a072bf
commit 022b02064a
3 changed files with 26 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
boards.cfg
View File

@ -357,6 +357,7 @@ Active arm armv7 socfpga altera socfpga
Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier <mathieu.poirier@linaro.org>
Active arm armv7 u8500 st-ericsson u8500 u8500_href - -
Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang <b18965@freescale.com>
Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek <monstr@monstr.eu>:Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren@nvidia.com>
Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Alban Bedel <alban.bedel@avionic-design.de>
Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Alban Bedel <alban.bedel@avionic-design.de>

9
include/configs/zynq-common.h
View File

@ -36,7 +36,6 @@
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
/* Zynq Serial driver */
#define CONFIG_ZYNQ_SERIAL_UART1
#ifdef CONFIG_ZYNQ_SERIAL_UART0
# define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000
# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
@ -60,8 +59,6 @@
#endif
/* Ethernet driver */
#define CONFIG_ZYNQ_GEM0
#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
# define CONFIG_NET_MULTI
# define CONFIG_ZYNQ_GEM
@ -71,7 +68,6 @@
# define CONFIG_PHY_MARVELL
#endif
#define CONFIG_ZYNQ_SPI
/* SPI */
#ifdef CONFIG_ZYNQ_SPI
# define CONFIG_SPI_FLASH
@ -79,10 +75,6 @@
# define CONFIG_CMD_SF
#endif
/* NOR */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ZYNQ_SDHCI0
/* MMC */
#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
# define CONFIG_MMC
@ -96,7 +88,6 @@
# define CONFIG_DOS_PARTITION
#endif
#define CONFIG_ZYNQ_I2C0
/* I2C */
#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
# define CONFIG_CMD_I2C

25
include/configs/zynq_zc70x.h Normal file
View File

@ -0,0 +1,25 @@
/*
* (C) Copyright 2013 Xilinx, Inc.
*
* Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards
* See zynq_common.h for Zynq common configs
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_ZYNQ_ZC70X_H
#define __CONFIG_ZYNQ_ZC70X_H
#define CONFIG_ZYNQ_SERIAL_UART1
#define CONFIG_ZYNQ_GEM0
#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ZYNQ_SDHCI0
#define CONFIG_ZYNQ_I2C0
#define CONFIG_ZYNQ_BOOT_FREEBSD
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_ZC70X_H */