fs: separate CONFIG_FS_{FAT, EXT4} from CONFIG_CMD_{FAT, EXT*}

This makes the FAT and ext4 filesystem implementations build if
CONFIG_FS_{FAT,EXT4} are defined, rather than basing the build on
whether CONFIG_CMD_{FAT,EXT*} are defined. This will allow the
filesystems to be built separately from the filesystem-specific commands
that use them. This paves the way for the creation of filesystem-generic
commands that used the filesystems, without requiring the filesystem-
specific commands.

Minor documentation changes are made for this change.

The new config options are automatically selected by the old config
options to retain backwards-compatibility.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
This commit is contained in:
Stephen Warren 2012-10-22 06:43:50 +00:00 committed by Tom Rini
parent 672ee2110c
commit 03e2ecf6b8
9 changed files with 38 additions and 13 deletions

4
README
View File

@ -807,9 +807,11 @@ The following options need to be configured:
CONFIG_CMD_EEPROM * EEPROM read/write support
CONFIG_CMD_ELF * bootelf, bootvx
CONFIG_CMD_EXPORTENV * export the environment
CONFIG_CMD_EXT2 * ext2 command support
CONFIG_CMD_EXT4 * ext4 command support
CONFIG_CMD_SAVEENV saveenv
CONFIG_CMD_FDC * Floppy Disk Support
CONFIG_CMD_FAT * FAT partition support
CONFIG_CMD_FAT * FAT command support
CONFIG_CMD_FDOS * Dos diskette Support
CONFIG_CMD_FLASH flinfo, erase, protect
CONFIG_CMD_FPGA FPGA device initialization support

View File

@ -1,15 +1,28 @@
This patch series adds support for ext4 ls,load and write features in uboot
Journaling is supported for write feature.
To enable support for the ext4 (and ext2) filesystem implementation,
#define CONFIG_FS_EXT4
If you want write support,
#define CONFIG_EXT4_WRITE
To Enable ext2 ls and load commands, modify the board specific config file with
#define CONFIG_CMD_EXT2
This automatically defines CONFIG_FS_EXT4 for you.
To Enable ext4 ls and load commands, modify the board specific config file with
#define CONFIG_CMD_EXT4
This automatically defines CONFIG_FS_EXT4 for you.
To enable ext4 write command, modify the board specific config file with
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
These automatically define CONFIG_FS_EXT4 and CONFIG_EXT4_WRITE for you.
Also relevant are the generic filesystem commands,
#define CONFIG_CMD_FS_GENERIC
This does not automatically enable EXT4 support for you.
Steps to test:

View File

@ -30,11 +30,8 @@ include $(TOPDIR)/config.mk
LIB = $(obj)libext4fs.o
AOBJS =
COBJS-$(CONFIG_CMD_EXT4) := ext4fs.o ext4_common.o dev.o
ifndef CONFIG_CMD_EXT4
COBJS-$(CONFIG_CMD_EXT2) := ext4fs.o ext4_common.o dev.o
endif
COBJS-$(CONFIG_CMD_EXT4_WRITE) += ext4_journal.o crc16.o
COBJS-$(CONFIG_FS_EXT4) := ext4fs.o ext4_common.o dev.o
COBJS-$(CONFIG_EXT4_WRITE) += ext4_journal.o crc16.o
SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS-y))

View File

@ -56,7 +56,7 @@ int ext4fs_indir3_blkno = -1;
struct ext2_inode *g_parent_inode;
static int symlinknest;
#if defined(CONFIG_CMD_EXT4_WRITE)
#if defined(CONFIG_EXT4_WRITE)
uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n)
{
uint32_t res = size / n;

View File

@ -37,7 +37,7 @@
#include <ext4fs.h>
#include <malloc.h>
#include <asm/errno.h>
#if defined(CONFIG_CMD_EXT4_WRITE)
#if defined(CONFIG_EXT4_WRITE)
#include "ext4_journal.h"
#include "crc16.h"
#endif
@ -71,7 +71,7 @@ int ext4fs_find_file(const char *path, struct ext2fs_node *rootnode,
int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name,
struct ext2fs_node **fnode, int *ftype);
#if defined(CONFIG_CMD_EXT4_WRITE)
#if defined(CONFIG_EXT4_WRITE)
uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n);
int ext4fs_checksum_update(unsigned int i);
int ext4fs_get_parent_inode_num(const char *dirname, char *dname, int flags);

View File

@ -196,7 +196,7 @@ int ext4fs_read(char *buf, unsigned len)
return ext4fs_read_file(ext4fs_file, 0, len, buf);
}
#if defined(CONFIG_CMD_EXT4_WRITE)
#if defined(CONFIG_EXT4_WRITE)
static void ext4fs_update(void)
{
short i;

View File

@ -24,11 +24,11 @@ include $(TOPDIR)/config.mk
LIB = $(obj)libfat.o
AOBJS =
COBJS-$(CONFIG_CMD_FAT) := fat.o
COBJS-$(CONFIG_FS_FAT) := fat.o
COBJS-$(CONFIG_FAT_WRITE):= fat_write.o
ifndef CONFIG_SPL_BUILD
COBJS-$(CONFIG_CMD_FAT) += file.o
COBJS-$(CONFIG_FS_FAT) += file.o
endif
SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c)

View File

@ -13,4 +13,17 @@
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#endif
#if defined(CONFIG_CMD_FAT) && !defined(CONFIG_FS_FAT)
#define CONFIG_FS_FAT
#endif
#if (defined(CONFIG_CMD_EXT4) || defined(CONFIG_CMD_EXT2)) && \
!defined(CONFIG_FS_EXT4)
#define CONFIG_FS_EXT4
#endif
#if defined(CONFIG_CMD_EXT4_WRITE) && !defined(CONFIG_EXT4_WRITE)
#define CONFIG_EXT4_WRITE
#endif
#endif /* __CONFIG_FALLBACKS_H */

View File

@ -116,7 +116,7 @@ struct ext_filesystem {
extern struct ext2_data *ext4fs_root;
extern struct ext2fs_node *ext4fs_file;
#if defined(CONFIG_CMD_EXT4_WRITE)
#if defined(CONFIG_EXT4_WRITE)
extern struct ext2_inode *g_parent_inode;
extern int gd_index;
extern int gindex;