sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

ARM: tegra: add BPMP and dependencies to Tegra186 DT 

This adds the DT content that's needed to allow board DTs to enable use
of BPMP, clocks, resets, GPIOs, eMMC, and SD cards.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
This commit is contained in:
Stephen Warren 2016-07-27 15:24:51 -06:00 committed by Tom Warren
parent 6e7a11e64e
commit 19014203c4
1 changed files with 53 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
arch/arm/dts/tegra186.dtsi
View File

@ -1,14 +1,16 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/tegra186-clock.h>
#include <dt-bindings/gpio/tegra186-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
#include <dt-bindings/reset/tegra186-reset.h>
/ {
compatible = "nvidia,tegra186";
#address-cells = <2>;
#size-cells = <2>;
gpio@2200000 {
gpio_main: gpio@2200000 {
compatible = "nvidia,tegra186-gpio";
reg-names = "security", "gpio";
reg =
@ -34,9 +36,24 @@
status = "disabled";
};
sdhci@3400000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03400000 0x0 0x200>;
resets = <&bpmp TEGRA186_RESET_SDMMC1>;
reset-names = "sdmmc";
clocks = <&bpmp TEGRA186_CLK_SDMMC1>;
clock-names = "sdmmc";
interrupts = <GIC_SPI 62 0x04>;
status = "disabled";
};
sdhci@3460000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03460000 0x0 0x200>;
resets = <&bpmp TEGRA186_RESET_SDMMC4>;
reset-names = "sdmmc";
clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
clock-names = "sdmmc";
interrupts = <GIC_SPI 31 0x04>;
status = "disabled";
};
@ -49,7 +66,7 @@
#mbox-cells = <2>;
};
gpio@c2f0000 {
gpio_aon: gpio@c2f0000 {
compatible = "nvidia,tegra186-gpio-aon";
reg-names = "security", "gpio";
reg =
@ -62,4 +79,38 @@
interrupt-controller;
#interrupt-cells = <2>;
};
sysram@30000000 {
compatible = "nvidia,tegra186-sysram", "mmio-sram";
reg = <0x0 0x30000000 0x0 0x50000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
sysram_cpu_bpmp_tx: shmem@4e000 {
compatible = "nvidia,tegra186-bpmp-shmem";
reg = <0x0 0x4e000 0x0 0x1000>;
};
sysram_cpu_bpmp_rx: shmem@4f000 {
compatible = "nvidia,tegra186-bpmp-shmem";
reg = <0x0 0x4f000 0x0 0x1000>;
};
};
bpmp: bpmp {
compatible = "nvidia,tegra186-bpmp";
mboxes = <&hsp HSP_MBOX_TYPE_DB HSP_DB_MASTER_BPMP>;
/*
* In theory, these references, and the configuration in the
* node these reference point at, are board-specific, since
* they depend on the BCT's memory carve-out setup, the
* firmware that's actually loaded onto the BPMP, etc. However,
* in practice, all boards are likely to use identical values.
*/
shmem = <&sysram_cpu_bpmp_tx &sysram_cpu_bpmp_rx>;
#clock-cells = <1>;
#power-domain-cells = <1>;
#reset-cells = <1>;
};
};