sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

ARM: imx6: disable bandgap self-bias after boot 

The self-bias circuit is used by the bandgap during startup.
Once the bandgap has stabilized, the self-bias circuit should
be disabled for best noise performance of analog blocks.
Also this bit should be disabled before the chip enters STOP mode or
when ever the regular bandgap is disabled.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com>
This commit is contained in:
Peng Fan 2015-01-15 14:22:32 +08:00 committed by Stefano Babic
parent e72d344386
commit 1f516faa45
2 changed files with 26 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
arch/arm/cpu/armv7/mx6/soc.c
View File

@ -255,6 +255,23 @@ static void clear_mmdc_ch_mask(void)
writel(0, &mxc_ccm->ccdr);
}
static void init_bandgap(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
/*
* Ensure the bandgap has stabilized.
*/
while (!(readl(&anatop->ana_misc0) & 0x80))
;
/*
* For best noise performance of the analog blocks using the
* outputs of the bandgap, the reftop_selfbiasoff bit should
* be set.
*/
writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
}
#ifdef CONFIG_MX6SL
static void set_preclk_from_osc(void)
{
@ -274,6 +291,13 @@ int arch_cpu_init(void)
/* Need to clear MMDC_CHx_MASK to make warm reset work. */
clear_mmdc_ch_mask();
/*
* Disable self-bias circuit in the analog bandap.
* The self-bias circuit is used by the bandgap during startup.
* This bit should be set after the bandgap has initialized.
*/
init_bandgap();
/*
* When low freq boot is enabled, ROM will not set AHB
* freq, so we need to ensure AHB freq is 132MHz in such

2
arch/arm/include/asm/arch-mx6/crm_regs.h
View File

@ -1063,4 +1063,6 @@ struct mxc_ccm_reg {
#define BF_ANADIG_PFD_528_PFD0_FRAC(v) \
(((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC)
#define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008
#endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */