sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

MX51EVK: Remove CPLD related code 

There is no CPLD on MX51EVK board, so remove CPLD related function.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
This commit is contained in:
Fabio Estevam 2010-03-31 06:32:56 -07:00 committed by trix
parent bbe310922f
commit 2720178533
2 changed files with 0 additions and 68 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

67
board/freescale/mx51evk/mx51evk.c
View File

@ -72,72 +72,6 @@ static void setup_iomux_uart(void)
mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
}
static void setup_expio(void)
{
u32 reg;
struct weim *pweim = (struct weim *)WEIM_BASE_ADDR;
struct clkctl *pclkctl = (struct clkctl *)CCM_BASE_ADDR;
/* CS5 setup */
mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT0);
writel(0x00410089, &pweim[5].csgcr1);
writel(0x00000002, &pweim[5].csgcr2);
/* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */
writel(0x32260000, &pweim[5].csrcr1);
/* APR = 0 */
writel(0x00000000, &pweim[5].csrcr2);
/*
* WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, WEN=0,
* WCSA=0, WCSN=0
*/
writel(0x72080F00, &pweim[5].cswcr1);
mx51_io_board = (struct io_board_ctrl *)(CS5_BASE_ADDR +
IO_BOARD_OFFSET);
if ((readw(&mx51_io_board->id1) == 0xAAAA) &&
(readw(&mx51_io_board->id2) == 0x5555)) {
if (is_soc_rev(CHIP_REV_2_0) < 0) {
reg = readl(&pclkctl->cbcdr);
reg = (reg & (~0x70000)) | 0x30000;
writel(reg, &pclkctl->cbcdr);
/* make sure divider effective */
while (readl(&pclkctl->cdhipr) != 0)
;
writel(0x0, &pclkctl->ccdr);
}
} else {
/* CS1 */
writel(0x00410089, &pweim[1].csgcr1);
writel(0x00000002, &pweim[1].csgcr2);
/* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */
writel(0x32260000, &pweim[1].csrcr1);
/* APR=0 */
writel(0x00000000, &pweim[1].csrcr2);
/*
* WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0,
* WEN=0, WCSA=0, WCSN=0
*/
writel(0x72080F00, &pweim[1].cswcr1);
mx51_io_board = (struct io_board_ctrl *)(CS1_BASE_ADDR +
IO_BOARD_OFFSET);
}
/* Reset interrupt status reg */
writew(0x1F, &(mx51_io_board->int_rest));
writew(0x00, &(mx51_io_board->int_rest));
writew(0xFFFF, &(mx51_io_board->int_mask));
/* Reset the XUART and Ethernet controllers */
reg = readw(&(mx51_io_board->sw_reset));
reg |= 0x9;
writew(reg, &(mx51_io_board->sw_reset));
reg &= ~0x9;
writew(reg, &(mx51_io_board->sw_reset));
}
static void setup_iomux_fec(void)
{
/*FEC_MDIO*/
@ -349,7 +283,6 @@ int board_init(void)
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
setup_iomux_uart();
setup_expio();
setup_iomux_fec();
return 0;
}

1
board/freescale/mx51evk/mx51evk.h
View File

@ -47,5 +47,4 @@ struct io_board_ctrl {
};
#endif
#define IO_BOARD_OFFSET (0x20000)
#endif