omap3: overo: Use common configurations for Overo
Clean-up the board configuration file for the Gumstix Overo board by including common omap3 definitions from ti_omap3_common.h as suggested here [1]. [1] http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/185960 Signed-off-by: Ash Charles <ashcharles@gmail.com> Conflicts: include/configs/omap3_overo.h
This commit is contained in:
Ash Charles
Tom Rini
parent
3c92c3232c
commit
29cc1d8e26
|
|
@ -7,80 +7,35 @@
|
|||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
#define CONFIG_OMAP /* in a TI OMAP core */
|
||||
#define CONFIG_OMAP34XX /* which is a 34XX */
|
||||
#define CONFIG_OMAP3_OVERO /* working with overo */
|
||||
#define CONFIG_OMAP_GPIO
|
||||
#define CONFIG_OMAP_COMMON
|
||||
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
|
||||
#define CONFIG_NAND
|
||||
|
||||
#define CONFIG_SDRC /* The chip has SDRC controller */
|
||||
#include <configs/ti_omap3_common.h>
|
||||
|
||||
#include <asm/arch/cpu.h> /* get chip and board defs */
|
||||
#include <asm/arch/omap3.h>
|
||||
|
||||
/*
|
||||
* Display CPU and Board information
|
||||
*/
|
||||
/* Display CPU and Board information */
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
/* Clock Defines */
|
||||
#define V_OSCK 26000000 /* Clock output from T2 */
|
||||
#define V_SCLK (V_OSCK >> 1)
|
||||
|
||||
/* call misc_init_r */
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
/* pass the revision tag */
|
||||
#define CONFIG_REVISION_TAG
|
||||
|
||||
#define CONFIG_OF_LIBFDT
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
/* override size of malloc() pool */
|
||||
#undef CONFIG_SYS_MALLOC_LEN
|
||||
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */
|
||||
|
||||
/* Shift 128 << 15 provides 4 MiB heap to support UBI commands.
|
||||
* Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 15))
|
||||
|
||||
/*
|
||||
* Hardware drivers
|
||||
*/
|
||||
/* I2C Support */
|
||||
#define CONFIG_SYS_I2C_OMAP34XX
|
||||
|
||||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
|
||||
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
||||
|
||||
/*
|
||||
* select serial console configuration
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 3
|
||||
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
|
||||
#define CONFIG_SERIAL3 3
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
|
||||
115200}
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_OMAP_HSMMC
|
||||
#define CONFIG_DOS_PARTITION
|
||||
/* TWL4030 LED */
|
||||
#define CONFIG_TWL4030_LED
|
||||
|
||||
/* Initialize GPIOs by default */
|
||||
#define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO Bank 2 */
|
||||
#define CONFIG_OMAP3_GPIO_3 /* GPIO64..95 is in GPIO Bank 3 */
|
||||
#define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO Bank 4 */
|
||||
|
|
@ -88,34 +43,18 @@
|
|||
#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO Bank 6 */
|
||||
|
||||
/* commands to include */
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
||||
#define CONFIG_CMD_FAT /* FAT support */
|
||||
#define CONFIG_CMD_FS_GENERIC
|
||||
|
||||
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
||||
#define CONFIG_CMD_MMC /* MMC support */
|
||||
#define CONFIG_CMD_NAND /* NAND support */
|
||||
|
||||
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
|
||||
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
|
||||
#undef CONFIG_CMD_IMI /* iminfo */
|
||||
#undef CONFIG_CMD_IMLS /* List all found images */
|
||||
#undef CONFIG_CMD_NFS /* NFS support */
|
||||
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
|
||||
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
|
||||
#define CONFIG_CMD_MTDPARTS /* MTD partition support */
|
||||
#ifdef CONFIG_NAND
|
||||
#define CONFIG_CMD_UBI /* UBI-formated MTD partition support */
|
||||
#define CONFIG_CMD_UBIFS /* Read-only UBI volume operations */
|
||||
|
||||
#define CONFIG_RBTREE /* required by CONFIG_CMD_UBI */
|
||||
#define CONFIG_LZO /* required by CONFIG_CMD_UBIFS */
|
||||
|
||||
#define CONFIG_MTD_DEVICE /* required by CONFIG_CMD_MTDPARTS */
|
||||
#define CONFIG_MTD_PARTITIONS /* required for UBI partition support */
|
||||
|
||||
/* NAND block size is 128 KiB. Synchronize these values with
|
||||
|
|
@ -133,41 +72,18 @@
|
|||
"256k(environ)," \
|
||||
"8m(linux)," \
|
||||
"-(rootfs)"
|
||||
#else /* CONFIG_CMD_NAND */
|
||||
#else /* CONFIG_NAND */
|
||||
#define MTDPARTS_DEFAULT
|
||||
#endif /* CONFIG_CMD_NAND */
|
||||
#endif /* CONFIG_NAND */
|
||||
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
|
||||
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
|
||||
#define CONFIG_SYS_I2C_OMAP34XX
|
||||
|
||||
/*
|
||||
* TWL4030
|
||||
*/
|
||||
#define CONFIG_TWL4030_POWER
|
||||
#define CONFIG_TWL4030_LED
|
||||
|
||||
/*
|
||||
* Board NAND Info.
|
||||
*/
|
||||
/* Board NAND Info. */
|
||||
#define CONFIG_SYS_NAND_QUIET_TEST
|
||||
#define CONFIG_NAND_OMAP_GPMC
|
||||
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
|
||||
/* to access nand */
|
||||
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
|
||||
/* to access nand */
|
||||
/* at CS0 */
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
|
||||
/* devices */
|
||||
/* Environment information */
|
||||
#define CONFIG_BOOTDELAY 5
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"loadaddr=0x82000000\0" \
|
||||
"dtbaddr=0x81600000\0" \
|
||||
"dtbfile=overo.dtb\0" \
|
||||
DEFAULT_LINUX_BOOT_ENV \
|
||||
"fdtfile=overo.dtb\0" \
|
||||
"bootdir=/boot\0" \
|
||||
"bootfile=zImage\0" \
|
||||
"usbtty=cdc_acm\0" \
|
||||
|
|
@ -210,10 +126,10 @@
|
|||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
|
||||
"loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
|
||||
"loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
|
||||
"mmcbootfdt=echo Booting with DT from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootz ${loadaddr} - ${dtbaddr}\0" \
|
||||
"bootz ${loadaddr} - ${fdtaddr}\0" \
|
||||
"nandboot=echo Booting from nand ...; " \
|
||||
"run nandargs; " \
|
||||
"nand read ${loadaddr} linux; " \
|
||||
|
|
@ -236,7 +152,7 @@
|
|||
"run mmcboot;" \
|
||||
"fi;" \
|
||||
"if run loadzimage; then " \
|
||||
"if test -n $dtbfile; then " \
|
||||
"if test -n $fdtfile; then " \
|
||||
"if run loadfdt; then " \
|
||||
"run mmcbootfdt;" \
|
||||
"fi;" \
|
||||
|
|
@ -245,56 +161,23 @@
|
|||
"fi;" \
|
||||
"run nandboot; " \
|
||||
|
||||
#define CONFIG_AUTO_COMPLETE 1
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
||||
#undef CONFIG_SYS_PROMPT
|
||||
#define CONFIG_SYS_PROMPT "Overo # "
|
||||
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command */
|
||||
/* args */
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
/* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
|
||||
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
|
||||
0x01F00000) /* 31MB */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
|
||||
/* address */
|
||||
/*
|
||||
* OMAP3 has 12 GP timers, they can be driven by the system clock
|
||||
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
|
||||
* This rate is divided by a local divisor.
|
||||
*/
|
||||
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
|
||||
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Physical Memory Map
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
|
||||
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
|
||||
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH and environment organization
|
||||
*/
|
||||
|
||||
/* **** PISMO SUPPORT *** */
|
||||
|
||||
/* FLASH and environment organization */
|
||||
/* Configure the PISMO */
|
||||
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
|
||||
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
|
||||
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#if defined(CONFIG_NAND)
|
||||
#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
|
||||
#endif
|
||||
|
||||
|
|
@ -310,67 +193,18 @@
|
|||
#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
|
||||
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
|
||||
|
||||
/* Configure SMSC9211 ethernet */
|
||||
#if defined(CONFIG_CMD_NET)
|
||||
/*----------------------------------------------------------------------------
|
||||
* SMSC9211 Ethernet from SMSC9118 family
|
||||
*----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
#define CONFIG_SMC911X
|
||||
#define CONFIG_SMC911X_32_BIT
|
||||
#define CONFIG_SMC911X_BASE 0x2C000000
|
||||
|
||||
#endif /* (CONFIG_CMD_NET) */
|
||||
|
||||
/*
|
||||
* Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
|
||||
* and older u-boot.bin with the new U-Boot SPL.
|
||||
*/
|
||||
#define CONFIG_SYS_TEXT_BASE 0x80008000
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
||||
/* Initial RAM setup */
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
||||
CONFIG_SYS_INIT_RAM_SIZE - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
#define CONFIG_SYS_CACHELINE_SIZE 64
|
||||
|
||||
/* Defines for SPL */
|
||||
#define CONFIG_SPL
|
||||
#define CONFIG_SPL_FRAMEWORK
|
||||
#define CONFIG_SPL_NAND_SIMPLE
|
||||
#define CONFIG_SPL_TEXT_BASE 0x40200800
|
||||
#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
|
||||
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
|
||||
|
||||
/* move malloc and bss high to prevent clashing with the main image */
|
||||
#define CONFIG_SYS_SPL_MALLOC_START 0x87000000
|
||||
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
|
||||
#define CONFIG_SPL_BSS_START_ADDR 0x87080000 /* end of minimum RAM */
|
||||
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
|
||||
|
||||
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
|
||||
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
|
||||
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
|
||||
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
|
||||
|
||||
#define CONFIG_SPL_BOARD_INIT
|
||||
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
||||
#define CONFIG_SPL_LIBDISK_SUPPORT
|
||||
#define CONFIG_SPL_I2C_SUPPORT
|
||||
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
||||
#define CONFIG_SPL_MMC_SUPPORT
|
||||
#define CONFIG_SPL_FAT_SUPPORT
|
||||
#define CONFIG_SPL_SERIAL_SUPPORT
|
||||
#define CONFIG_SPL_NAND_SUPPORT
|
||||
#define CONFIG_SPL_NAND_BASE
|
||||
#define CONFIG_SPL_NAND_DRIVERS
|
||||
#define CONFIG_SPL_NAND_ECC
|
||||
#define CONFIG_SPL_GPIO_SUPPORT
|
||||
#define CONFIG_SPL_POWER_SUPPORT
|
||||
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
|
||||
|
||||
/* NAND boot config */
|
||||
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||||
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
||||
|
|
|
|||
Loading…
Reference in New Issue