ahci: support LBA48 data reads for 2+TB drives

Enable full 48-bit LBA48 data reads by passing the upper word of the
LBA block pointer in bytes 9 and 10 of the FIS.

This allows uboot to load data from any arbitrary sector on a drive
with 2 or more TB of available data connected to an AHCI controller.

Signed-off-by: Mark Langsdorf <mark.langsdorf@gmail.com>
Signed-off-by: Andre Przywara <osp@andrep.de>
[trini: Make use of CONFIG_SYS_64BIT_LBA in a few places to drop
 warnings on platforms that don't enable that feature ]
Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Mark Langsdorf 2015-06-05 00:58:45 +01:00 committed by Tom Rini
parent 35df893199
commit 2b42c9317d
3 changed files with 77 additions and 11 deletions

View File

@ -56,6 +56,8 @@ static block_dev_desc_t scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
void scsi_setup_test_unit_ready(ccb * pccb);
void scsi_setup_read6(ccb * pccb, lbaint_t start, unsigned short blocks);
void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks);
void scsi_setup_read16(ccb * pccb, lbaint_t start, unsigned long blocks);
static void scsi_setup_write_ext(ccb *pccb, lbaint_t start,
unsigned short blocks);
void scsi_setup_inquiry(ccb * pccb);
@ -357,7 +359,9 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
* scsi_read
*/
#define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */
/* almost the maximum amount of the scsi_ext command.. */
#define SCSI_MAX_READ_BLK 0xFFFF
#define SCSI_LBA48_READ 0xFFFFFFF
static ulong scsi_read(int device, lbaint_t blknr, lbaint_t blkcnt,
void *buffer)
@ -379,7 +383,17 @@ static ulong scsi_read(int device, lbaint_t blknr, lbaint_t blkcnt,
device, start, blks, (unsigned long)buffer);
do {
pccb->pdata=(unsigned char *)buf_addr;
if(blks>SCSI_MAX_READ_BLK) {
#ifdef CONFIG_SYS_64BIT_LBA
if (start > SCSI_LBA48_READ) {
unsigned long blocks;
blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK);
pccb->datalen = scsi_dev_desc[device].blksz * blocks;
scsi_setup_read16(pccb, start, blocks);
start += blocks;
blks -= blocks;
} else
#endif
if (blks > SCSI_MAX_READ_BLK) {
pccb->datalen=scsi_dev_desc[device].blksz * SCSI_MAX_READ_BLK;
smallblks=SCSI_MAX_READ_BLK;
scsi_setup_read_ext(pccb,start,smallblks);
@ -579,6 +593,37 @@ void scsi_setup_test_unit_ready(ccb * pccb)
pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */
}
#ifdef CONFIG_SYS_64BIT_LBA
void scsi_setup_read16(ccb * pccb, lbaint_t start, unsigned long blocks)
{
pccb->cmd[0] = SCSI_READ16;
pccb->cmd[1] = pccb->lun<<5;
pccb->cmd[2] = ((unsigned char) (start >> 56)) & 0xff;
pccb->cmd[3] = ((unsigned char) (start >> 48)) & 0xff;
pccb->cmd[4] = ((unsigned char) (start >> 40)) & 0xff;
pccb->cmd[5] = ((unsigned char) (start >> 32)) & 0xff;
pccb->cmd[6] = ((unsigned char) (start >> 24)) & 0xff;
pccb->cmd[7] = ((unsigned char) (start >> 16)) & 0xff;
pccb->cmd[8] = ((unsigned char) (start >> 8)) & 0xff;
pccb->cmd[9] = ((unsigned char) (start)) & 0xff;
pccb->cmd[10] = 0;
pccb->cmd[11] = ((unsigned char) (blocks >> 24)) & 0xff;
pccb->cmd[12] = ((unsigned char) (blocks >> 16)) & 0xff;
pccb->cmd[13] = ((unsigned char) (blocks >> 8)) & 0xff;
pccb->cmd[14] = (unsigned char) blocks & 0xff;
pccb->cmd[15] = 0;
pccb->cmdlen = 16;
pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
debug ("scsi_setup_read16: cmd: %02X %02X "
"startblk %02X%02X%02X%02X%02X%02X%02X%02X "
"blccnt %02X%02X%02X%02X\n",
pccb->cmd[0], pccb->cmd[1],
pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9],
pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]);
}
#endif
void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks)
{
pccb->cmd[0]=SCSI_READ10;

View File

@ -726,18 +726,25 @@ static int ata_scsiop_inquiry(ccb *pccb)
*/
static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
{
u32 lba = 0;
lbaint_t lba = 0;
u16 blocks = 0;
u8 fis[20];
u8 *user_buffer = pccb->pdata;
u32 user_buffer_size = pccb->datalen;
/* Retrieve the base LBA number from the ccb structure. */
memcpy(&lba, pccb->cmd + 2, sizeof(lba));
lba = be32_to_cpu(lba);
if (pccb->cmd[0] == SCSI_READ16) {
memcpy(&lba, pccb->cmd + 2, 8);
lba = be64_to_cpu(lba);
} else {
u32 temp;
memcpy(&temp, pccb->cmd + 2, 4);
lba = be32_to_cpu(temp);
}
/*
* And the number of blocks.
* Retrieve the base LBA number and the block count from
* the ccb structure.
*
* For 10-byte and 16-byte SCSI R/W commands, transfer
* length 0 means transfer 0 block of data.
@ -746,10 +753,13 @@ static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
*
* WARNING: one or two older ATA drives treat 0 as 0...
*/
blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
if (pccb->cmd[0] == SCSI_READ16)
blocks = (((u16)pccb->cmd[13]) << 8) | ((u16) pccb->cmd[14]);
else
blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
debug("scsi_ahci: %s %d blocks starting from lba 0x%x\n",
is_write ? "write" : "read", (unsigned)lba, blocks);
debug("scsi_ahci: %s %u blocks starting from lba 0x" LBAFU "\n",
is_write ? "write" : "read", blocks, lba);
/* Preset the FIS */
memset(fis, 0, sizeof(fis));
@ -770,14 +780,23 @@ static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
return -EIO;
}
/* LBA48 SATA command but only use 32bit address range within
* that. The next smaller command range (28bit) is too small.
/*
* LBA48 SATA command but only use 32bit address range within
* that (unless we've enabled 64bit LBA support). The next
* smaller command range (28bit) is too small.
*/
fis[4] = (lba >> 0) & 0xff;
fis[5] = (lba >> 8) & 0xff;
fis[6] = (lba >> 16) & 0xff;
fis[7] = 1 << 6; /* device reg: set LBA mode */
fis[8] = ((lba >> 24) & 0xff);
#ifdef CONFIG_SYS_64BIT_LBA
if (pccb->cmd[0] == SCSI_READ16) {
fis[9] = ((lba >> 32) & 0xff);
fis[10] = ((lba >> 40) & 0xff);
}
#endif
fis[3] = 0xe0; /* features */
/* Block (sector) count */
@ -883,6 +902,7 @@ int scsi_exec(ccb *pccb)
int ret;
switch (pccb->cmd[0]) {
case SCSI_READ16:
case SCSI_READ10:
ret = ata_scsiop_read_write(pccb, 0);
break;

View File

@ -132,6 +132,7 @@ typedef struct SCSI_cmd_block{
#define SCSI_MED_REMOVL 0x1E /* Prevent/Allow medium Removal (O) */
#define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */
#define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */
#define SCSI_READ16 0x48
#define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */
#define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */
#define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */