Merge branch 'master' of git://www.denx.de/git/u-boot-socfpga

This commit is contained in:
Tom Rini 2015-12-19 22:05:31 -05:00
commit 34059d8f50
35 changed files with 289 additions and 553 deletions

View File

@ -25,6 +25,7 @@
* to be added to the gmac1 device tree blob.
*/
ethernet0 = &gmac1;
udc0 = &usb1;
};
regulator_3_3v: 3-3-v-regulator {

View File

@ -16,6 +16,7 @@
aliases {
ethernet0 = &gmac1;
udc0 = &usb1;
};
memory {
@ -59,3 +60,7 @@
status = "okay";
u-boot,dm-pre-reloc;
};
&usb1 {
status = "okay";
};

View File

@ -16,6 +16,7 @@
aliases {
ethernet0 = &gmac0;
udc0 = &usb1;
};
memory {
@ -51,3 +52,7 @@
bus-width = <8>;
u-boot,dm-pre-reloc;
};
&usb1 {
status = "okay";
};

View File

@ -25,6 +25,7 @@
* to be added to the gmac1 device tree blob.
*/
ethernet0 = &gmac1;
udc0 = &usb1;
};
regulator_3_3v: 3-3-v-regulator {
@ -77,10 +78,6 @@
vqmmc-supply = <&regulator_3_3v>;
};
&usb1 {
status = "okay";
};
&qspi {
status = "okay";
@ -100,3 +97,7 @@
tslch-ns = <4>;
};
};
&usb1 {
status = "okay";
};

View File

@ -16,6 +16,7 @@
aliases {
ethernet0 = &gmac1;
udc0 = &usb1;
};
memory {
@ -90,3 +91,7 @@
tslch-ns = <4>;
};
};
&usb1 {
status = "okay";
};

View File

@ -14,6 +14,10 @@
bootargs = "console=ttyS0,115200";
};
aliases {
udc0 = &usb1;
};
memory {
name = "memory";
device_type = "memory";
@ -28,6 +32,15 @@
&gmac1 {
status = "okay";
phy-mode = "rgmii";
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
rxd3-skew-ps = <0>;
txen-skew-ps = <0>;
txc-skew-ps = <2600>;
rxdv-skew-ps = <0>;
rxc-skew-ps = <2000>;
};
&i2c0 {
@ -63,3 +76,7 @@
tslch-ns = <4>;
};
};
&usb1 {
status = "okay";
};

View File

@ -2,9 +2,14 @@ if ARCH_SOCFPGA
config TARGET_SOCFPGA_ARRIA5
bool
select TARGET_SOCFPGA_GEN5
config TARGET_SOCFPGA_CYCLONE5
bool
select TARGET_SOCFPGA_GEN5
config TARGET_SOCFPGA_GEN5
bool
choice
prompt "Altera SOCFPGA board select"

View File

@ -8,11 +8,12 @@
#
obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o \
fpga_manager.o scan_manager.o
fpga_manager.o board.o
obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
# QTS-generated config file wrappers
obj-y += wrap_pll_config.o
obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += scan_manager.o wrap_pll_config.o
obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o \
wrap_sdram_config.o
CFLAGS_wrap_iocsr_config.o += -I$(srctree)/board/$(BOARDDIR)

View File

@ -0,0 +1,64 @@
/*
* Altera SoCFPGA common board code
*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <asm/arch/reset_manager.h>
#include <asm/io.h>
#include <usb.h>
#include <usb/dwc2_udc.h>
DECLARE_GLOBAL_DATA_PTR;
void s_init(void) {}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
/* Address of boot parameters for ATAG (if ATAG is used) */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
#ifdef CONFIG_USB_GADGET
struct dwc2_plat_otg_data socfpga_otg_data = {
.usb_gusbcfg = 0x1417,
};
int board_usb_init(int index, enum usb_init_type init)
{
int node[2], count;
fdt_addr_t addr;
count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc",
COMPAT_ALTERA_SOCFPGA_DWC2USB,
node, 2);
if (count <= 0) /* No controller found. */
return 0;
addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg");
if (addr == FDT_ADDR_T_NONE) {
printf("UDC Controller has no 'reg' property!\n");
return -EINVAL;
}
/* Patch the address from OF into the controller pdata. */
socfpga_otg_data.regs_otg = addr;
return dwc2_udc_probe(&socfpga_otg_data);
}
int g_dnl_board_usb_cable_connected(void)
{
return 1;
}
#endif

View File

@ -129,9 +129,13 @@ struct socfpga_system_manager {
#define SYSMGR_FPGAINTF_NAND (1 << 4)
#define SYSMGR_FPGAINTF_SDMMC (1 << 5)
/* FIXME: This is questionable macro. */
#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
((((drvsel) << 0) & 0x7) | (((smplsel) << 3) & 0x38))
#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
#define SYSMGR_SDMMC_SMPLSEL_SHIFT 3
#else
#define SYSMGR_SDMMC_SMPLSEL_SHIFT 4
#endif
#define SYSMGR_SDMMC_DRVSEL_SHIFT 0
/* EMAC Group Bit definitions */
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0

View File

@ -3,83 +3,4 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/reset_manager.h>
#include <asm/io.h>
#include <usb.h>
#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
#include <micrel.h>
#include <netdev.h>
#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
void s_init(void) {}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
/* Address of boot parameters for ATAG (if ATAG is used) */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
/*
* PHY configuration
*/
#ifdef CONFIG_PHY_MICREL_KSZ9021
int board_phy_config(struct phy_device *phydev)
{
int ret;
/*
* These skew settings for the KSZ9021 ethernet phy is required for ethernet
* to work reliably on most flavors of cyclone5 boards.
*/
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
0x0);
if (ret)
return ret;
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
0x0);
if (ret)
return ret;
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
0xf0f0);
if (ret)
return ret;
if (phydev->drv->config)
return phydev->drv->config(phydev);
return 0;
}
#endif
#ifdef CONFIG_USB_GADGET
struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
int board_usb_init(int index, enum usb_init_type init)
{
return dwc2_udc_probe(&socfpga_otg_data);
}
int g_dnl_board_usb_cable_connected(void)
{
return 1;
}
#endif

View File

@ -3,83 +3,4 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/reset_manager.h>
#include <asm/io.h>
#include <usb.h>
#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
#include <micrel.h>
#include <netdev.h>
#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
void s_init(void) {}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
/* Address of boot parameters for ATAG (if ATAG is used) */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
/*
* PHY configuration
*/
#ifdef CONFIG_PHY_MICREL_KSZ9021
int board_phy_config(struct phy_device *phydev)
{
int ret;
/*
* These skew settings for the KSZ9021 ethernet phy is required for ethernet
* to work reliably on most flavors of cyclone5 boards.
*/
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
0x0);
if (ret)
return ret;
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
0x0);
if (ret)
return ret;
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
0xf0f0);
if (ret)
return ret;
if (phydev->drv->config)
return phydev->drv->config(phydev);
return 0;
}
#endif
#ifdef CONFIG_USB_GADGET
struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
int board_usb_init(int index, enum usb_init_type init)
{
return dwc2_udc_probe(&socfpga_otg_data);
}
int g_dnl_board_usb_cable_connected(void)
{
return 1;
}
#endif

View File

@ -3,43 +3,4 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/reset_manager.h>
#include <asm/io.h>
#include <usb.h>
#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
DECLARE_GLOBAL_DATA_PTR;
void s_init(void) {}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
/* Address of boot parameters for ATAG (if ATAG is used) */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
#ifdef CONFIG_USB_GADGET
struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
int board_usb_init(int index, enum usb_init_type init)
{
return dwc2_udc_probe(&socfpga_otg_data);
}
int g_dnl_board_usb_cable_connected(void)
{
return 1;
}
#endif

View File

@ -3,83 +3,4 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/reset_manager.h>
#include <asm/io.h>
#include <usb.h>
#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
#include <micrel.h>
#include <netdev.h>
#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
void s_init(void) {}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
/* Address of boot parameters for ATAG (if ATAG is used) */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
/*
* PHY configuration
*/
#ifdef CONFIG_PHY_MICREL_KSZ9021
int board_phy_config(struct phy_device *phydev)
{
int ret;
/*
* These skew settings for the KSZ9021 ethernet phy is required for ethernet
* to work reliably on most flavors of cyclone5 boards.
*/
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
0x0);
if (ret)
return ret;
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
0x0);
if (ret)
return ret;
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
0xf0f0);
if (ret)
return ret;
if (phydev->drv->config)
return phydev->drv->config(phydev);
return 0;
}
#endif
#ifdef CONFIG_USB_GADGET
struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
int board_usb_init(int index, enum usb_init_type init)
{
return dwc2_udc_probe(&socfpga_otg_data);
}
int g_dnl_board_usb_cable_connected(void)
{
return 1;
}
#endif

View File

@ -5,27 +5,10 @@
*/
#include <common.h>
#include <i2c.h>
#include <miiphy.h>
#include <asm/arch/reset_manager.h>
#include <asm/gpio.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
void s_init(void) {}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
/* Address of boot parameters for ATAG (if ATAG is used) */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
int board_early_init_f(void)
{
int ret;

View File

@ -3,70 +3,4 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <micrel.h>
#include <netdev.h>
#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
void s_init(void) {}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
/* Address of boot parameters for ATAG (if ATAG is used) */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
/*
* PHY configuration
*/
#ifdef CONFIG_PHY_MICREL_KSZ9031
int board_phy_config(struct phy_device *phydev)
{
int ret;
/*
* These skew settings for the KSZ9021 ethernet phy is required for ethernet
* to work reliably on most flavors of cyclone5 boards.
*/
ret = ksz9031_phy_extended_write(phydev, 0x2,
MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x70);
if (ret)
return ret;
ret = ksz9031_phy_extended_write(phydev, 0x2,
MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x7777);
if (ret)
return ret;
ret = ksz9031_phy_extended_write(phydev, 0x2,
MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0);
if (ret)
return ret;
ret = ksz9031_phy_extended_write(phydev, 0x2,
MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x03FC);
if (ret)
return ret;
if (phydev->drv->config)
return phydev->drv->config(phydev);
return 0;
}
#endif

View File

@ -3,83 +3,4 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/reset_manager.h>
#include <asm/io.h>
#include <usb.h>
#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
#include <micrel.h>
#include <netdev.h>
#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
void s_init(void) {}
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
/* Address of boot parameters for ATAG (if ATAG is used) */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
/*
* PHY configuration
*/
#ifdef CONFIG_PHY_MICREL_KSZ9021
int board_phy_config(struct phy_device *phydev)
{
int ret;
/*
* These skew settings for the KSZ9021 ethernet phy is required for ethernet
* to work reliably on most flavors of cyclone5 boards.
*/
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
0x0);
if (ret)
return ret;
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
0x0);
if (ret)
return ret;
ret = ksz9021_phy_extended_write(phydev,
MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
0xf0f0);
if (ret)
return ret;
if (phydev->drv->config)
return phydev->drv->config(phydev);
return 0;
}
#endif
#ifdef CONFIG_USB_GADGET
struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
int board_usb_init(int index, enum usb_init_type init)
{
return dwc2_udc_probe(&socfpga_otg_data);
}
int g_dnl_board_usb_cable_connected(void)
{
return 1;
}
#endif

View File

@ -21,3 +21,5 @@ CONFIG_SYS_NS16550=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_DM_MMC=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -21,3 +21,5 @@ CONFIG_SYS_NS16550=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_DM_MMC=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -19,3 +19,5 @@ CONFIG_SYS_NS16550=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_DM_MMC=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -19,3 +19,5 @@ CONFIG_SYS_NS16550=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_DM_MMC=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -23,3 +23,5 @@ CONFIG_SYS_NS16550=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_DM_MMC=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -22,3 +22,5 @@ CONFIG_SYS_NS16550=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_DM_MMC=y
CONFIG_USB=y
CONFIG_DM_USB=y

View File

@ -33,6 +33,8 @@ struct dwmci_socfpga_priv_data {
static void socfpga_dwmci_clksel(struct dwmci_host *host)
{
struct dwmci_socfpga_priv_data *priv = host->priv;
u32 sdmmc_mask = ((priv->smplsel & 0x7) << SYSMGR_SDMMC_SMPLSEL_SHIFT) |
((priv->drvsel & 0x7) << SYSMGR_SDMMC_DRVSEL_SHIFT);
/* Disable SDMMC clock. */
clrbits_le32(&clock_manager_base->per_pll.en,
@ -40,8 +42,7 @@ static void socfpga_dwmci_clksel(struct dwmci_host *host)
debug("%s: drvsel %d smplsel %d\n", __func__,
priv->drvsel, priv->smplsel);
writel(SYSMGR_SDMMC_CTRL_SET(priv->smplsel, priv->drvsel),
&system_manager_base->sdmmcgrp_ctrl);
writel(sdmmc_mask, &system_manager_base->sdmmcgrp_ctrl);
debug("%s: SYSMGR_SDMMCGRP_CTRL_REG = 0x%x\n", __func__,
readl(&system_manager_base->sdmmcgrp_ctrl));

View File

@ -9,9 +9,14 @@
*/
#include <config.h>
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <micrel.h>
#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
static struct phy_driver KSZ804_driver = {
.name = "Micrel KSZ804",
.uid = 0x221510,
@ -174,6 +179,73 @@ static int ksz90xx_startup(struct phy_device *phydev)
return 0;
}
/* Common OF config bits for KSZ9021 and KSZ9031 */
#if defined(CONFIG_PHY_MICREL_KSZ9021) || defined(CONFIG_PHY_MICREL_KSZ9031)
#ifdef CONFIG_DM_ETH
struct ksz90x1_reg_field {
const char *name;
const u8 size; /* Size of the bitfield, in bits */
const u8 off; /* Offset from bit 0 */
const u8 dflt; /* Default value */
};
struct ksz90x1_ofcfg {
const u16 reg;
const u16 devad;
const struct ksz90x1_reg_field *grp;
const u16 grpsz;
};
static const struct ksz90x1_reg_field ksz90x1_rxd_grp[] = {
{ "rxd0-skew-ps", 4, 0, 0x7 }, { "rxd1-skew-ps", 4, 4, 0x7 },
{ "rxd2-skew-ps", 4, 8, 0x7 }, { "rxd3-skew-ps", 4, 12, 0x7 }
};
static const struct ksz90x1_reg_field ksz90x1_txd_grp[] = {
{ "txd0-skew-ps", 4, 0, 0x7 }, { "txd1-skew-ps", 4, 4, 0x7 },
{ "txd2-skew-ps", 4, 8, 0x7 }, { "txd3-skew-ps", 4, 12, 0x7 },
};
static int ksz90x1_of_config_group(struct phy_device *phydev,
struct ksz90x1_ofcfg *ofcfg)
{
struct udevice *dev = phydev->dev;
struct phy_driver *drv = phydev->drv;
const int ps_to_regval = 200;
int val[4];
int i, changed = 0, offset, max;
u16 regval = 0;
if (!drv || !drv->writeext)
return -EOPNOTSUPP;
for (i = 0; i < ofcfg->grpsz; i++) {
val[i] = fdtdec_get_uint(gd->fdt_blob, dev->of_offset,
ofcfg->grp[i].name, -1);
offset = ofcfg->grp[i].off;
if (val[i] == -1) {
/* Default register value for KSZ9021 */
regval |= ofcfg->grp[i].dflt << offset;
} else {
changed = 1; /* Value was changed in OF */
/* Calculate the register value and fix corner cases */
if (val[i] > ps_to_regval * 0xf) {
max = (1 << ofcfg->grp[i].size) - 1;
regval |= max << offset;
} else {
regval |= (val[i] / ps_to_regval) << offset;
}
}
}
if (!changed)
return 0;
return drv->writeext(phydev, 0, ofcfg->devad, ofcfg->reg, regval);
}
#endif
#endif
#ifdef CONFIG_PHY_MICREL_KSZ9021
/*
* KSZ9021
@ -188,6 +260,35 @@ static int ksz90xx_startup(struct phy_device *phydev)
#define CTRL1000_CONFIG_MASTER (1 << 11)
#define CTRL1000_MANUAL_CONFIG (1 << 12)
#ifdef CONFIG_DM_ETH
static const struct ksz90x1_reg_field ksz9021_clk_grp[] = {
{ "txen-skew-ps", 4, 0, 0x7 }, { "txc-skew-ps", 4, 4, 0x7 },
{ "rxdv-skew-ps", 4, 8, 0x7 }, { "rxc-skew-ps", 4, 12, 0x7 },
};
static int ksz9021_of_config(struct phy_device *phydev)
{
struct ksz90x1_ofcfg ofcfg[] = {
{ MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0, ksz90x1_rxd_grp, 4 },
{ MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0, ksz90x1_txd_grp, 4 },
{ MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0, ksz9021_clk_grp, 4 },
};
int i, ret = 0;
for (i = 0; i < ARRAY_SIZE(ofcfg); i++)
ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
if (ret)
return ret;
return 0;
}
#else
static int ksz9021_of_config(struct phy_device *phydev)
{
return 0;
}
#endif
int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val)
{
/* extended registers */
@ -224,6 +325,11 @@ static int ksz9021_config(struct phy_device *phydev)
const unsigned master = CTRL1000_PREFER_MASTER |
CTRL1000_CONFIG_MASTER | CTRL1000_MANUAL_CONFIG;
unsigned features = phydev->drv->features;
int ret;
ret = ksz9021_of_config(phydev);
if (ret)
return ret;
if (getenv("disable_giga"))
features &= ~(SUPPORTED_1000baseT_Half |
@ -260,6 +366,36 @@ static struct phy_driver ksz9021_driver = {
#define MII_KSZ9031_MMD_ACCES_CTRL 0x0d
#define MII_KSZ9031_MMD_REG_DATA 0x0e
#ifdef CONFIG_DM_ETH
static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
{ { "txen-skew-ps", 4, 0, 0x7 }, { "rxdv-skew-ps", 4, 4, 0x7 } };
static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
{ { "rxc-skew-ps", 5, 0, 0xf }, { "txc-skew-ps", 5, 5, 0xf } };
static int ksz9031_of_config(struct phy_device *phydev)
{
struct ksz90x1_ofcfg ofcfg[] = {
{ MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, 2, ksz9031_ctl_grp, 2 },
{ MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 },
{ MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 },
{ MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, 2, ksz9031_clk_grp, 2 },
};
int i, ret = 0;
for (i = 0; i < ARRAY_SIZE(ofcfg); i++)
ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
if (ret)
return ret;
return 0;
}
#else
static int ksz9031_of_config(struct phy_device *phydev)
{
return 0;
}
#endif
/* Accessors to extended registers*/
int ksz9031_phy_extended_write(struct phy_device *phydev,
int devaddr, int regnum, u16 mode, u16 val)
@ -304,13 +440,21 @@ static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr,
MII_KSZ9031_MOD_DATA_POST_INC_RW, val);
};
static int ksz9031_config(struct phy_device *phydev)
{
int ret;
ret = ksz9031_of_config(phydev);
if (ret)
return ret;
return genphy_config(phydev);
}
static struct phy_driver ksz9031_driver = {
.name = "Micrel ksz9031",
.uid = 0x221620,
.mask = 0xfffff0,
.features = PHY_GBIT_FEATURES,
.config = &genphy_config,
.config = &ksz9031_config,
.startup = &ksz90xx_startup,
.shutdown = &genphy_shutdown,
.writeext = &ksz9031_phy_extwrite,

View File

@ -47,30 +47,15 @@
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)
/* PHY */
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#define CONFIG_KSZ9021_CLK_SKEW_ENV "micrel-ksz9021-clk-skew"
#define CONFIG_KSZ9021_CLK_SKEW_VAL 0xf0f0
#define CONFIG_KSZ9021_DATA_SKEW_ENV "micrel-ksz9021-data-skew"
#define CONFIG_KSZ9021_DATA_SKEW_VAL 0x0
#endif
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
#endif
#define CONFIG_G_DNL_MANUFACTURER "Altera"
/* Extra Environment */
#define CONFIG_HOSTNAME socfpga_arria5
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=n\0" \
"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \

View File

@ -3,8 +3,8 @@
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
#define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
#ifndef __CONFIG_SOCFPGA_COMMON_H__
#define __CONFIG_SOCFPGA_COMMON_H__
/* Virtual target or real hardware */
@ -69,6 +69,10 @@
#define CONFIG_CMDLINE_EDITING /* Command history etc */
#define CONFIG_SYS_HUSH_PARSER
#ifndef CONFIG_SYS_HOSTNAME
#define CONFIG_SYS_HOSTNAME CONFIG_SYS_BOARD
#endif
/*
* Cache
*/
@ -229,13 +233,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2
#define CONFIG_USB_STORAGE
/*
* NOTE: User must define either of the following to select which
* of the two USB controllers available on SoCFPGA to use.
* The DWC2 driver doesn't support multiple USB controllers.
* #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB0_ADDRESS
* #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
*/
#endif
/*
@ -262,7 +259,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
#define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM
#ifndef CONFIG_G_DNL_MANUFACTURER
#define CONFIG_G_DNL_MANUFACTURER "Altera"
#define CONFIG_G_DNL_MANUFACTURER CONFIG_SYS_VENDOR
#endif
#endif
@ -326,4 +323,4 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
*/
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#endif /* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */
#endif /* __CONFIG_SOCFPGA_COMMON_H__ */

View File

@ -47,30 +47,15 @@
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)
/* PHY */
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#define CONFIG_KSZ9021_CLK_SKEW_ENV "micrel-ksz9021-clk-skew"
#define CONFIG_KSZ9021_CLK_SKEW_VAL 0xf0f0
#define CONFIG_KSZ9021_DATA_SKEW_ENV "micrel-ksz9021-data-skew"
#define CONFIG_KSZ9021_DATA_SKEW_VAL 0x0
#endif
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
#endif
#define CONFIG_G_DNL_MANUFACTURER "Altera"
/* Extra Environment */
#define CONFIG_HOSTNAME socfpga_cyclone5
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=n\0" \
"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \

View File

@ -37,36 +37,21 @@
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_BOOTCOMMAND "run ramboot"
#else
#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot"
#endif
#define CONFIG_LOADADDR 0x01000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)
/* PHY */
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9031
#endif
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
#endif
#define CONFIG_G_DNL_MANUFACTURER "Terasic"
/* Extra Environment */
#define CONFIG_HOSTNAME socfpga_de0_nano_soc
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \

View File

@ -48,15 +48,7 @@
#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
#endif
#define CONFIG_G_DNL_MANUFACTURER "DENX"
/* Extra Environment */
#define CONFIG_HOSTNAME mcvevk
#define CONFIG_EXTRA_ENV_SETTINGS \
"consdev=ttyS0\0" \
"baudrate=115200\0" \

View File

@ -37,40 +37,21 @@
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_BOOTCOMMAND "run ramboot"
#else
#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot"
#endif
#define CONFIG_LOADADDR 0x01000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)
/* PHY */
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#define CONFIG_KSZ9021_CLK_SKEW_ENV "micrel-ksz9021-clk-skew"
#define CONFIG_KSZ9021_CLK_SKEW_VAL 0xf0f0
#define CONFIG_KSZ9021_DATA_SKEW_ENV "micrel-ksz9021-data-skew"
#define CONFIG_KSZ9021_DATA_SKEW_VAL 0x0
#endif
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
#endif
#define CONFIG_G_DNL_MANUFACTURER "Terasic"
/* Extra Environment */
#define CONFIG_HOSTNAME socfpga_sockit
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=n\0" \
"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \

View File

@ -43,30 +43,15 @@
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)
/* PHY */
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#define CONFIG_KSZ9021_CLK_SKEW_ENV "micrel-ksz9021-clk-skew"
#define CONFIG_KSZ9021_CLK_SKEW_VAL 0xf0f0
#define CONFIG_KSZ9021_DATA_SKEW_ENV "micrel-ksz9021-data-skew"
#define CONFIG_KSZ9021_DATA_SKEW_VAL 0x0
#endif
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
#endif
#define CONFIG_G_DNL_MANUFACTURER "EBV"
/* Extra Environment */
#define CONFIG_HOSTNAME socfpga_socrates
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=n\0" \
"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \

View File

@ -53,9 +53,6 @@
#define CONFIG_PHY_MARVELL
#define PHY_ANEG_TIMEOUT 8000
/* Extra Environment */
#define CONFIG_HOSTNAME sr1500
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=n\0" \
"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \

View File

@ -167,6 +167,7 @@ enum fdt_compat_id {
COMPAT_INTEL_IRQ_ROUTER, /* Intel Interrupt Router */
COMPAT_ALTERA_SOCFPGA_DWMAC, /* SoCFPGA Ethernet controller */
COMPAT_ALTERA_SOCFPGA_DWMMC, /* SoCFPGA DWMMC controller */
COMPAT_ALTERA_SOCFPGA_DWC2USB, /* SoCFPGA DWC2 USB controller */
COMPAT_INTEL_BAYTRAIL_FSP, /* Intel Bay Trail FSP */
COMPAT_INTEL_BAYTRAIL_FSP_MDP, /* Intel FSP memory-down params */

View File

@ -71,6 +71,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(COMPAT_INTEL_IRQ_ROUTER, "intel,irq-router"),
COMPAT(ALTERA_SOCFPGA_DWMAC, "altr,socfpga-stmmac"),
COMPAT(ALTERA_SOCFPGA_DWMMC, "altr,socfpga-dw-mshc"),
COMPAT(ALTERA_SOCFPGA_DWC2USB, "snps,dwc2"),
COMPAT(COMPAT_INTEL_BAYTRAIL_FSP, "intel,baytrail-fsp"),
COMPAT(COMPAT_INTEL_BAYTRAIL_FSP_MDP, "intel,baytrail-fsp-mdp"),
};