Merge branch 'u-boot' of /home/mkr/git/u-boot-tq-group into bugfix

MAKEALL

@@ -301,10 +301,12 @@ LIST_83xx="		\
 	MPC8313ERDB_66	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
+	MPC832XEMDS_ATM	\
 	MPC8349EMDS	\
 	MPC8349ITX	\
 	MPC8349ITXGP	\
 	MPC8360EMDS	\
+	MPC8360EMDS_ATM	\
 	sbc8349		\
 	TQM834x		\
 "

Makefile

@@ -1766,7 +1766,8 @@ MPC8323ERDB_config:	unconfig
 MPC832XEMDS_config \
 MPC832XEMDS_HOST_33_config \
 MPC832XEMDS_HOST_66_config \
-MPC832XEMDS_SLAVE_config:	unconfig
+MPC832XEMDS_SLAVE_config \
+MPC832XEMDS_ATM_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
@@ -1781,11 +1782,18 @@ MPC832XEMDS_SLAVE_config:	unconfig
 	if [ "$(findstring _33_,$@)" ] ; then \
 		echo -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
 		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
-	fi ;
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+	fi ; \
+	if [ "$(findstring _ATM_,$@)" ] ; then \
+		echo -n "...ATM..." ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
+        fi ;
 	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
 
 MPC8349EMDS_config:	unconfig
@@ -1808,7 +1816,8 @@ MPC8349ITXGP_config:	unconfig
 MPC8360EMDS_config \
 MPC8360EMDS_HOST_33_config \
 MPC8360EMDS_HOST_66_config \
-MPC8360EMDS_SLAVE_config:	unconfig
+MPC8360EMDS_SLAVE_config \
+MPC8360EMDS_ATM_config: unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
@@ -1823,10 +1832,17 @@ MPC8360EMDS_SLAVE_config:	unconfig
 	if [ "$(findstring _33_,$@)" ] ; then \
 		echo -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
 		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+	fi ; \
+	if [ "$(findstring _ATM_,$@)" ] ; then \
+		echo -n "...ATM..." ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
 

board/amcc/sequoia/cmd_sequoia.c

@@ -25,6 +25,7 @@
 #include <common.h>
 #include <command.h>
 #include <i2c.h>
+#include <asm/io.h>
 
 /*
  * There are 2 versions of production Sequoia & Rainier platforms.
@@ -39,7 +40,7 @@
  * All Sequoias & Rainiers select from two possible EEPROMs in Boot
  * Config F. One for 33MHz PCI, one for 66MHz PCI. The following
  * values are for the 33MHz PCI configuration. Byte 5 (0 base) is
- * the only  value affected for a 66MHz PCI and simply needs a +0x10.
+ * the only value affected for a 33MHz PCI and simply needs a | 0x08.
  */
 
 #define NAND_COMPATIBLE	0x01
@@ -56,6 +57,7 @@ static char *config_labels[] = {
 	"CPU: 416 PLB: 166 OPB: 83 EBC: 55",
 	"CPU: 500 PLB: 166 OPB: 83 EBC: 55",
 	"CPU: 533 PLB: 133 OPB: 66 EBC: 66",
+	"CPU: 667 PLB: 133 OPB: 66 EBC: 66",
 	"CPU: 667 PLB: 166 OPB: 83 EBC: 55",
 	NULL
 };
@@ -96,6 +98,11 @@ static u8 boot_configs[][17] = {
 		0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, 0x40,
 		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
 	},
+	{
+		(NOR_COMPATIBLE),
+		0x87, 0x78, 0xa2, 0x56, 0x09, 0x57, 0xa0, 0x30, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
 	{
 		(NAND_COMPATIBLE | NOR_COMPATIBLE),
 		0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, 0x40,
@@ -200,8 +207,12 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	/* check CPLD register +5 for PCI 66MHz flag */
-	if (in8(CFG_BCSR_BASE + 5) & 0x01)
+	if ((in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN) == 0)
-		buf[5] += 0x10;
+		/*
+		 * PLB-to-PCI divisor = 3 for 33MHz sync PCI
+		 * instead of 2 for 66MHz systems
+		 */
+		buf[5] |= 0x08;
 
 	if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
 		printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);

board/amcc/sequoia/sequoia.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * (C) Copyright 2006
@@ -24,6 +24,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <ppc440.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -362,8 +363,8 @@ int checkboard(void)
 	printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
 #endif
 
-	rev = in8(CFG_BCSR_BASE + 0);
+	rev = in_8((void *)(CFG_BCSR_BASE + 0));
-	val = in8(CFG_BCSR_BASE + 5) & 0x01;
+	val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
 	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
 
 	if (s != NULL) {

board/amcc/yosemite/yosemite.c

@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -22,6 +24,7 @@
 #include <common.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <spd_sdram.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -181,8 +184,8 @@ int checkboard(void)
 	printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
 #endif
 
-	rev = *(u8 *)(CFG_CPLD + 0);
+	rev = in_8((void *)(CFG_BCSR_BASE + 0));
-	val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+	val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
 	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
 
 	if (s != NULL) {

board/freescale/common/pq-mds-pib.c

@@ -79,19 +79,19 @@ int pib_init(void)
 
 	printf("QOC3 ATM card on PMC0\n");
 #elif defined(CONFIG_MPC832XEMDS)
-	val = 0;
+	val8 = 0;
-	i2c_write(0x26, 0x7, 1, &val, 1);
+	i2c_write(0x26, 0x7, 1, &val8, 1);
-	val = 0xf7;
+	val8 = 0xf7;
-	i2c_write(0x26, 0x3, 1, &val, 1);
+	i2c_write(0x26, 0x3, 1, &val8, 1);
 
-	val = 0;
+	val8 = 0;
-	i2c_write(0x21, 0x6, 1, &val, 1);
+	i2c_write(0x21, 0x6, 1, &val8, 1);
-	i2c_write(0x21, 0x7, 1, &val, 1);
+	i2c_write(0x21, 0x7, 1, &val8, 1);
 
-	val = 0xdf;
+	val8 = 0xdf;
-	i2c_write(0x21, 0x2, 1, &val, 1);
+	i2c_write(0x21, 0x2, 1, &val8, 1);
-	val = 0xef;
+	val8 = 0xef;
-	i2c_write(0x21, 0x3, 1, &val, 1);
+	i2c_write(0x21, 0x3, 1, &val8, 1);
 
 	eieio();
 

common/cmd_bootm.c

@@ -466,7 +466,7 @@ U_BOOT_CMD(
  	"\t'arg' can be the address of an initrd image\n"
 #if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)
 	"\tWhen booting a Linux kernel which requires a flat device-tree\n"
-	"\ta third argument is required which is the address of the of the\n"
+	"\ta third argument is required which is the address of the\n"
 	"\tdevice-tree blob. To boot that kernel without an initrd image,\n"
 	"\tuse a '-' for the second argument. If you do not pass a third\n"
 	"\ta bd_info struct will be passed instead\n"

common/cmd_dtt.c

@@ -57,7 +57,7 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
 	  dtt,	1,	1,	do_dtt,
-	  "dtt     - Digital Thermometer and Themostat\n",
+	  "dtt     - Digital Thermometer and Thermostat\n",
 	  "        - Read temperature from digital thermometer and thermostat.\n"
 );
 

cpu/mpc86xx/spd_sdram.c

@@ -948,19 +948,25 @@ unsigned int enable_ddr(unsigned int ddr_num)
 	 * Read both dimm slots and decide whether
 	 * or not to enable this controller.
 	 */
-	memset((void *)&spd1,0,sizeof(spd1));
+	memset((void *)&spd1, 0, sizeof(spd1));
-	memset((void *)&spd2,0,sizeof(spd2));
+	memset((void *)&spd2, 0, sizeof(spd2));
 
 	if (ddr_num == 1) {
 		CFG_READ_SPD(SPD_EEPROM_ADDRESS1,
 			     0, 1, (uchar *) &spd1, sizeof(spd1));
+#if defined(SPD_EEPROM_ADDRESS2)
 		CFG_READ_SPD(SPD_EEPROM_ADDRESS2,
 			     0, 1, (uchar *) &spd2, sizeof(spd2));
+#endif
 	} else {
+#if defined(SPD_EEPROM_ADDRESS3)
 		CFG_READ_SPD(SPD_EEPROM_ADDRESS3,
 			     0, 1, (uchar *) &spd1, sizeof(spd1));
+#endif
+#if defined(SPD_EEPROM_ADDRESS4)
 		CFG_READ_SPD(SPD_EEPROM_ADDRESS4,
 			     0, 1, (uchar *) &spd2, sizeof(spd2));
+#endif
 	}
 
 	/*
@@ -1105,21 +1111,25 @@ spd_sdram(void)
 {
 	int memsize_ddr1_dimm1 = 0;
 	int memsize_ddr1_dimm2 = 0;
+	int memsize_ddr1 = 0;
+	unsigned int law_size_ddr1;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1;
+	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	int memsize_ddr2_dimm1 = 0;
 	int memsize_ddr2_dimm2 = 0;
-	int memsize_total = 0;
-	int memsize_ddr1 = 0;
 	int memsize_ddr2 = 0;
+	unsigned int law_size_ddr2;
+#endif
+
 	unsigned int ddr1_enabled = 0;
 	unsigned int ddr2_enabled = 0;
-	unsigned int law_size_ddr1;
+	int memsize_total = 0;
-	unsigned int law_size_ddr2;
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
 
 #ifdef CONFIG_DDR_INTERLEAVE
 	unsigned int law_size_interleaved;
-	volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1;
 	volatile ccsr_ddr_t *ddr2 = &immap->im_ddr2;
 
 	memsize_ddr1_dimm1 = spd_init(SPD_EEPROM_ADDRESS1,
@@ -1194,9 +1204,11 @@ spd_sdram(void)
 				      (unsigned int)memsize_total * 1024*1024);
 	memsize_total += memsize_ddr1_dimm1;
 
+#if defined(SPD_EEPROM_ADDRESS2)
 	memsize_ddr1_dimm2 = spd_init(SPD_EEPROM_ADDRESS2,
 				      1, 2,
 				      (unsigned int)memsize_total * 1024*1024);
+#endif
 	memsize_total += memsize_ddr1_dimm2;
 
 	/*

cpu/pxa/usb.c

@@ -67,6 +67,22 @@ int usb_cpu_init()
 
 int usb_cpu_stop()
 {
+	UHCHR |= UHCHR_FHR;
+	udelay(11);
+	UHCHR &= ~UHCHR_FHR;
+
+	UHCCOMS |= 1;
+	udelay(10);
+
+#if defined(CONFIG_CPU_MONAHANS)
+	UHCHR |= UHCHR_SSEP0;
+#endif
+#if defined(CONFIG_PXA27X)
+	UHCHR |= UHCHR_SSEP2;
+#endif
+	UHCHR |= UHCHR_SSEP1;
+	UHCHR |= UHCHR_SSE;
+
 	return 0;
 }
 

drivers/isp116x-hcd.c

@@ -113,9 +113,9 @@ static const char hcd_name[] = "isp116x-hcd";
 
 struct isp116x isp116x_dev;
 struct isp116x_platform_data isp116x_board;
-int got_rhsc = 0;		/* root hub status change */
+static int got_rhsc;		/* root hub status change */
 struct usb_device *devgone;	/* device which was disconnected */
-int rh_devnum = 0;		/* address of Root Hub endpoint */
+static int rh_devnum;		/* address of Root Hub endpoint */
 
 /* ------------------------------------------------------------------------- */
 
@@ -522,11 +522,13 @@ static int unpack_fifo(struct isp116x *isp116x, struct usb_device *dev,
 		done += PTD_GET_LEN(&ptd[i]);
 
 		cc = PTD_GET_CC(&ptd[i]);
-		if (cc == TD_DATAUNDERRUN) {	/* underrun is no error... */
+
-			DBG("allowed data underrun");
+		/* Data underrun means basically that we had more buffer space than
-			cc = TD_CC_NOERROR;
+		 * the function had data. It is perfectly normal but upper levels have
-		}
+		 * to know how much we actually transferred.
-		if (cc != TD_CC_NOERROR && ret == TD_CC_NOERROR)
+		 */
+		if (cc == TD_NOTACCESSED ||
+				(cc != TD_CC_NOERROR && (ret == TD_CC_NOERROR || ret == TD_DATAUNDERRUN)))
 			ret = cc;
 	}
 
@@ -592,11 +594,19 @@ static int isp116x_interrupt(struct isp116x *isp116x)
 	return ret;
 }
 
-#define PTD_NUM			64	/* it should be enougth... */
+/* With one PTD we can transfer almost 1K in one go;
-struct ptd ptd[PTD_NUM];
+ * HC does the splitting into endpoint digestible transactions
+ */
+struct ptd ptd[1];
+
 static inline int max_transfer_len(struct usb_device *dev, unsigned long pipe)
 {
-	return min(PTD_NUM * usb_maxpacket(dev, pipe), PTD_NUM * 16);
+	unsigned mpck = usb_maxpacket(dev, pipe);
+
+	/* One PTD can transfer 1023 bytes but try to always
+	 * transfer multiples of endpoint buffer size
+	 */
+	return 1023 / mpck * mpck;
 }
 
 /* Do an USB transfer
@@ -610,13 +620,21 @@ static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe,
 	int max = usb_maxpacket(dev, pipe);
 	int dir_out = usb_pipeout(pipe);
 	int speed_low = usb_pipeslow(pipe);
-	int i, done, stat, timeout, cc;
+	int i, done = 0, stat, timeout, cc;
-	int retries = 10;
+
+	/* 500 frames or 0.5s timeout when function is busy and NAKs transactions for a while */
+	int retries = 500;
 
 	DBG("------------------------------------------------");
 	dump_msg(dev, pipe, buffer, len, "SUBMIT");
 	DBG("------------------------------------------------");
 
+	if (len >= 1024) {
+		ERR("Too big job");
+		dev->status = USB_ST_CRC_ERR;
+		return -1;
+	}
+
 	if (isp116x->disabled) {
 		ERR("EPIPE");
 		dev->status = USB_ST_CRC_ERR;
@@ -653,29 +671,15 @@ static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe,
 	isp116x_write_reg32(isp116x, HCINTSTAT, 0xff);
 
 	/* Prepare the PTD data */
-	done = 0;
+	ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK |
-	i = 0;
+		PTD_TOGGLE(usb_gettoggle(dev, epnum, dir_out));
-	do {
+	ptd->mps = PTD_MPS(max) | PTD_SPD(speed_low) | PTD_EP(epnum) | PTD_LAST_MSK;
-		ptd[i].count = PTD_CC_MSK | PTD_ACTIVE_MSK |
+	ptd->len = PTD_LEN(len) | PTD_DIR(dir);
-		    PTD_TOGGLE(usb_gettoggle(dev, epnum, dir_out));
+	ptd->faddr = PTD_FA(usb_pipedevice(pipe));
-		ptd[i].mps = PTD_MPS(max) | PTD_SPD(speed_low) | PTD_EP(epnum);
-		ptd[i].len = PTD_LEN(max > len - done ? len - done : max) |
-		    PTD_DIR(dir);
-		ptd[i].faddr = PTD_FA(usb_pipedevice(pipe));
-
-		usb_dotoggle(dev, epnum, dir_out);
-		done += PTD_GET_LEN(&ptd[i]);
-		i++;
-		if (i >= PTD_NUM) {
-			ERR("****** Cannot pack buffer! ******");
-			dev->status = USB_ST_BUF_ERR;
-			return -1;
-		}
-	} while (done < len);
-	ptd[i - 1].mps |= PTD_LAST_MSK;
 
+retry_same:
 	/* Pack data into FIFO ram */
-	pack_fifo(isp116x, dev, pipe, ptd, i, buffer, len);
+	pack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len);
 #ifdef EXTRA_DELAY
 	wait_ms(EXTRA_DELAY);
 #endif
@@ -738,17 +742,42 @@ static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe,
 	}
 
 	/* Unpack data from FIFO ram */
-	cc = unpack_fifo(isp116x, dev, pipe, ptd, i, buffer, len);
+	cc = unpack_fifo(isp116x, dev, pipe, ptd, 1, buffer, len);
 
-	/* Mmm... sometime we get 0x0f as cc which is a non sense!
+	i = PTD_GET_COUNT(ptd);
-	 * Just retry the transfer...
+	done += i;
+	buffer += i;
+	len -= i;
+
+	/* There was some kind of real problem; Prepare the PTD again
+	 * and retry from the failed transaction on
 	 */
-	if (cc == 0x0f && retries-- > 0) {
+	if (cc && cc != TD_NOTACCESSED && cc != TD_DATAUNDERRUN) {
-		usb_dotoggle(dev, epnum, dir_out);
+		if (retries >= 100) {
-		goto retry;
+			retries -= 100;
+			/* The chip will have toggled the toggle bit for the failed
+			 * transaction too. We have to toggle it back.
+			 */
+			usb_settoggle(dev, epnum, dir_out, !PTD_GET_TOGGLE(ptd));
+			goto retry;
+		}
+	}
+	/* "Normal" errors; TD_NOTACCESSED would mean in effect that the function have NAKed
+	 * the transactions from the first on for the whole frame. It may be busy and we retry
+	 * with the same PTD. PTD_ACTIVE (and not TD_NOTACCESSED) would mean that some of the
+	 * PTD didn't make it because the function was busy or the frame ended before the PTD
+	 * finished. We prepare the rest of the data and try again.
+	 */
+	else if (cc == TD_NOTACCESSED || PTD_GET_ACTIVE(ptd) || (cc != TD_DATAUNDERRUN && PTD_GET_COUNT(ptd) < PTD_GET_LEN(ptd))) {
+		if (retries) {
+			--retries;
+			if (cc == TD_NOTACCESSED && PTD_GET_ACTIVE(ptd) && !PTD_GET_COUNT(ptd)) goto retry_same;
+			usb_settoggle(dev, epnum, dir_out, PTD_GET_TOGGLE(ptd));
+			goto retry;
+		}
 	}
 
-	if (cc != TD_CC_NOERROR) {
+	if (cc != TD_CC_NOERROR && cc != TD_DATAUNDERRUN) {
 		DBG("****** completition code error %x ******", cc);
 		switch (cc) {
 		case TD_CC_BITSTUFFING:
@@ -766,6 +795,7 @@ static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe,
 		}
 		return -cc;
 	}
+	else usb_settoggle(dev, epnum, dir_out, PTD_GET_TOGGLE(ptd));
 
 	dump_msg(dev, pipe, buffer, len, "SUBMIT(ret)");
 
@@ -1369,6 +1399,8 @@ int usb_lowlevel_init(void)
 
 	DBG("");
 
+	got_rhsc = rh_devnum = 0;
+
 	/* Init device registers addr */
 	isp116x->addr_reg = (u16 *) ISP116X_HCD_ADDR;
 	isp116x->data_reg = (u16 *) ISP116X_HCD_DATA;

include/configs/sequoia.h

@@ -450,6 +450,8 @@
 #define CFG_EBC_PB2AP		0x24814580
 #define CFG_EBC_PB2CR		(CFG_BCSR_BASE | 0x38000)
 
+#define CFG_BCSR5_PCI66EN	0x80
+
 /*-----------------------------------------------------------------------
  * NAND FLASH
  *----------------------------------------------------------------------*/

include/configs/yosemite.h

@@ -359,6 +359,8 @@
 #define CFG_EBC_PB2AP		0x04814500
 #define CFG_EBC_PB2CR		(CFG_CPLD | 0x18000)
 
+#define CFG_BCSR5_PCI66EN	0x80
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */